DREMEL 196 Cutter, 7/32 in Dia, 1-1/2 in L, 1/8 in Dia Shank, HSS
D032-03525
- Appropriate for curved surfaces
- A versatile, high-quality cutter made of high-grade steel
- A versatile, high-quality cutter made of high-grade steel
- For curved surface, shaping, hollowing, grooving, slotting, inlaying, making tapered hole
DREMEL 200-1/15 Rotary Tool Kit, 0.9 A, 1/8 in Chuck, Keyed Chuck, 2-Speed, 15,000 to 35,000 rpm Spe
D032-02900
- Two-speed control allows you to set your speed at 15,000 or 35,000 rpm with a flip of a switch
- Click-and-set On/Off switch allows precise speed selection
- Click-and-set On/Off switch allows precise speed selection
- Cool-running ball bearing construction for smooth and quiet operation
- Replaceable motor brushes extend tool life
DREMEL 200-1/21 Rotary Tool Kit, 0.9 A, 1/8 in Chuck, Keyed Chuck, 2-Speed, 15,000 to 35,000 rpm Spe
D032-02951
- Two-speed control allows you to set your speed at 15,000 or 35,000 rpm with a flip of a switch
- Click-and-set On/Off switch allows precise speed selection
- Click-and-set On/Off switch allows precise speed selection
- Cool-running ball bearing construction for smooth and quiet operation
- Replaceable motor brushes extend tool life
DREMEL 220-01 Drill Press, 2 in Drilling
D032-02262
- Articulating drill press drills perpendicular and angled holes in 15 deg increments, up to 90 deg horizontal
- Flex shaft tool stand allows telescopic adjustment between 16 in and 29 in height
- Flex shaft tool stand allows telescopic adjustment between 16 in and 29 in height
- Tool holder holds tool at 90 deg horizontal for tasks such as polishing metal objects, sanding different shapes and grinding metal pieces
- Crow's nest provides on-board storage for drill bits, wrenches and other Dremel accessories
DREMEL 231 Shaper Router Table, Light-Duty, Metal/Plastic, Black
D032-00231
- Adjustable fence for versatile performance
- Slot, groove, shape, sand and trim edges
- Slot, groove, shape, sand and trim edges
- Attaches directly to workbench
- Attaches directly to workbench
DREMEL 26150117AC Cutter, 1/4 in Dia, 1-1/2 in L, 1/8 in Dia Shank, HSS
D032-03521
- Use the sides of the cutter rather than the tip for effective cutting
- Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics
- Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics
- A versatile, high-quality cutter made of high-grade steel
- For shaping, hollowing, grooving, slotting, inlaying, making tapered holes
DREMEL 3000-1/24 Rotary Tool Kit, 120 V, 1.2 A, 1/32 to 1/8 in Chuck, Keyed Chuck, 5000 to 35,000 rp
D032-03255
- EZ Twist nose cap with wrench for fast accessory changes
- Variable speed from 5000 to 35,000 rpm
- Variable speed from 5000 to 35,000 rpm
- Can be used with all Dremel rotary tool accessories and most attachments
- Cool-running ball bearing construction for smooth and quiet operation
DREMEL 4000-2/30 Rotary Tool Kit, 120 V, 1.6 A, 1/32 to 1/8 in Chuck, Keyed Chuck, 5000 to 35,000 rp
D032-02977
- High-performance motor for maximum performance at all speeds
- Electronic feedback for consistent speed under load
- Electronic feedback for consistent speed under load
- Variable speed for greater versatility
- Can be used with all Dremel rotary tool accessories and most attachments
DREMEL 4000-6/50 Rotary Tool Kit, 120 V, 1.6 A, 1/8 in Chuck, Keyed Chuck, 5000 to 35,000 rpm Speed
D032-02976
- High-performance motor for maximum performance at all speeds
- Electronic feedback for consistent speed under load
- Electronic feedback for consistent speed under load
- Variable speed for greater versatility
- Can be used with all Dremel rotary tool accessories and most attachments
DREMEL 401 Mandrel, HSS, For: Model 414, 422 and 429 Dremel Accessories
D032-00401
- A shank with a screw-like head used primarily to hold polishing bits and accessories
- High-quality component
- High-quality component
- Works with many accessories
DREMEL 407 Drum Sander Bit, 1/2 in Dia, 1-1/2 in L, 1/8 in Dia Shank, Aluminum Oxide
D032-00407
- Sanding band covered with aluminum oxide abrasive
- For rough shaping and smoothing
- For rough shaping and smoothing
DREMEL 408 Sanding Band, 1/2 in Dia Drum, 1/8 in Dia Shank, 60 Grit, Coarse, Aluminum Oxide Abrasive
D032-00408
- Removes rust from metal surfaces
- Shapes rubber surfaces
- Shapes rubber surfaces
- Shapes rubber surfaces
- Shapes rubber surfaces
DREMEL 409 Cut-Off Wheel, 15/16 in Dia, 0.025 in Thick, Emery Cloth Abrasive
D032-600409
- Makes it easy to cut or slot bolts and screws
- Cuts only along its edge
- Cuts only along its edge
- Use on sheet metal, thin wood and plastic
- Cuts only along its edge
DREMEL 414 Polishing Wheel, 1/2 in Dia
D032-600414
- Ideal for general polishing of most ferrous metals, stones, glass and ceramics
- Can be used with 421 polishing compound to produce a smooth finish
- Can be used with 421 polishing compound to produce a smooth finish
- Use 414, 422 and 429 with Mandrel 401
- A felt accessory continually renews its own surface while being used
DREMEL 420 Cut-Off Wheel, 15/16 in Dia, 0.04 in Thick, Emery Abrasive
D032-00420
- Makes it easy to cut or slot bolts and screws
- Cuts only along its edge
- Cuts only along its edge
DREMEL 421 Polishing Compound, 10 oz
D032-00421
- Applied with cloth or felt polishing accessories and nylon bristle brushes
- For polishing or brightening, remove light surface imperfections
- For polishing or brightening, remove light surface imperfections
DREMEL 422 Polishing Cone, 1 in L
D032-00422
- Great for contractors
- For cleaning and polishing
- For cleaning and polishing
DREMEL 425-02 Polishing Disc, 1 in Dia, Emery Cloth Abrasive
D032-03562
- Ideal for general polishing of most ferrous metals, stones, glass and ceramics
- Use it to remove small burrs and scratch marks left by grinding and sanding
- Use it to remove small burrs and scratch marks left by grinding and sanding
- Ideal to clean and define grooves
- For cleaning and polishing coarse surfaces, to clean and define grooves
DREMEL 426 Cut-Off Wheel, 1-1/4 in Dia, 0.045 in Thick
D032-00426
- May also be used on other materials including thin wood, plastics and ceramics
- Cut bolts or screws or make slots in rusted or stripped bolts and screws
- Cut bolts or screws or make slots in rusted or stripped bolts and screws
- The cut-off wheel cuts only along its edge
- The cut-off wheel cuts only along its edge