Need More Help? 718-499-1119
Search
Adhesives & Sealants
RTV Silicone Sealant, 8 oz, Aerosol Can, Clear
S259-90010
- RTV Silicone Sealants provide a tough, flexible bond between wood, metal, glass, plastic, ceramic, masonry, and more
- Bonds and seals cracks, holes and pores against water, dust, air leakage, chemicals, oils and greases
- Paints do not adhere well to this sealant
- Not recommended for exterior, below-waterline marine applications
- Not for use in direct contact with gasoline, kerosene or other liquid solvents
No. 7 Pipe Thread Sealants, 1 Pint Can, Black
R070-17432
- Medium-dry, soft-set sealant designed for use with lines carrying corrosive chemicals, including acids, caustics, alcohol, ethylene glycol, gasoline, and ammonia
- Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, and stainless steel pipe
T Plus 2 Pipe Thread Sealant, 1 Pint Can, White
R070-23431
- May be pressurized immediately following application
- Non-setting multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal
Tru-Blu Pipe Thread Sealant, 1 Quart Can, Blue
R070-31300
- For refrigeration and industrial applications
- Recommended for use on galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC and CPVC pipe
- Ideal for use as positive lock and seal on threaded fasteners
Tru-Blu Pipe Thread Sealant, 1/2 Pint Can, Blue
R070-31551
- For refrigeration and industrial applications
- Recommended for use on galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC and CPVC pipe
- Ideal for use as positive lock and seal on threaded fasteners
No. 5 Pipe Thread Sealant, 1/4 Pint Can, Yellow
R070-56315
- Soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings
- Ideal for application with a wide variety of fluids and gases, including potable water application
RD PRO Heat Resistant RTV Sealant, 10.1 oz Cartridge, Red
R008-00809
- High-performance industrial sealing and glazing compound that is ideal for use in most OEM and maintenance applications
- Offers excellent adhesion to most non-porous building substrates and remains permanently elastic
RD PRO Industrial Grade RTV Sealant, 10.1 oz Cartridge, Clear
R008-82601
- High performance sealing and glazing compound that is ideal for use in most OEM and maintenance applications
- Forms a strong, durable and weather-resistant seal and provides excellent adhesion to most non-porous surfaces
- Solvent clean up
RD PRO Industrial Grade RTV Sealant, 10.1 oz Cartridge, White
R008-81601
- High performance sealing and glazing compound that is ideal for use in most OEM and maintenance applications
- Forms a strong, durable and weather-resistant seal and provides excellent adhesion to most non-porous surfaces
- Solvent clean up
Aluminum Liquid (F-2), 1 lb, Kit, Aluminum
D055-07108
- Aluminum-filled pourable epoxy for making molds, patterns, and holding fixtures
- Can be machined, drilled, or tapped
- Low viscosity provides accurate reproduction of mold details and of delicate or intricate parts
- Qualifies under MMM-A-1754
- 75-minute working time
Plastic Steel Liquid (B), 1 lb, Can, Dark Grey
D055-10210
- Can be machined to close tolerances
- Hardens in about an hour
- Ideal leveling compound for machinery and equipment
- Low viscosity and high comprehensive strength
- When cast over models, steel-filled liquid epoxy provides accurate detail reproduction in the making of holding fixtures, light-gauge forming dies, and molds
Brushable Ceramic, 2 lb, Can, Blue
D055-11765
- When applied in a 15-20 mil coating, this low-viscosity, alumina-filled, brushable epoxy compound provides a smooth, protective barrier against wear, abrasion, corrosion, erosion, and chemical attack
- Low-friction surface reduces turbulence, wear, and cavitations
- Outstanding chemical resistance to acids, solvents, and alkalis
- 3 colors (red blue white) to insure uniform coating
- Red and white formulas are acceptable for use in meat and poultry plants
Brushable Ceramic, 2 lb, Can, Red
D055-11760
- When applied in a 15-20 mil coating, this low-viscosity, alumina-filled, brushable epoxy compound provides a smooth, protective barrier against wear, abrasion, corrosion, erosion, and chemical attack
- Low-friction surface reduces turbulence, wear, and cavitations
- Outstanding chemical resistance to acids, solvents, and alkalis
- 3 colors (red blue white) to insure uniform coating
- Red and white formulas are acceptable for use in meat and poultry plants
Floor Patch, 40 lb, Pail, Gray
D055-13120
- All-purpose concrete patching compound with a compression strength of 8,000 psi, three times the typical strength of concrete
- Easy-to-mix and apply
- Excellent adhesion to concrete, brick, masonry, metal or wood surfaces
- Excellent resistance to water, oils, solvents, and alkalis
- Acceptable for use in meat and poultry plants
5 Minute Epoxy, 2.5 oz, Dual Tube, Colorless to Light Yellow
D055-14210
- Rapid-curing, general-purpose adhesive/encapsulant which easily dispenses and mixes in seconds
- Dries in 15 minutes and reaches functional strength in 1 hour
- Bonds rigid durable substrates such as metals, glass, ceramics, concrete and wood in all combinations
- Forms a clear hard rigid bond self-leveling liquid in minutes
- Easily dispenses and mixes in seconds
5 Minute Epoxy, 25 mL, Dev-Tube, Colorless to Light Yellow
D055-14250
- Rapid-curing, general-purpose adhesive/encapsulant which easily dispenses and mixes in seconds
- Dries in 15 minutes and reaches functional strength in 1 hour
- Bonds rigid durable substrates such as metals, glass, ceramics, concrete and wood in all combinations
- Forms a clear hard rigid bond self-leveling liquid in minutes
- Easily dispenses and mixes in seconds
5 Minute Epoxy, 50 mL, Dual Cartridge, Colorless to Light Yellow
D055-14270
- Rapid-curing, general-purpose adhesive/encapsulant which easily dispenses and mixes in seconds
- Dries in 15 minutes and reaches functional strength in 1 hour
- Bonds rigid durable substrates such as metals, glass, ceramics, concrete and wood in all combinations
- Forms a clear hard rigid bond self-leveling liquid in minutes
- Easily dispenses and mixes in seconds
Mark 5 Mix Nozzle
D055-14285
- A 50 ml mix nozzle that is easy to load and automatically mixes adhesive components for application
- Used with Mark 5 14280 and 74001 manual gun for mixing and dispensing Devcon 1:1 urethane adhesives, 1:1 and 10:1 methacrylate adhesives, 1:1 and 2:1 epoxy adhesives
Plastic Welder, 25 mL, Dev-Tube, Straw Color
D055-14300
- Tough, structural adhesive with superior impact and peel resistance
- Requires minimal surface preparation
- Bonds dissimilar substrates as well as unprepared surfaces
- Functional cure in one hour
- Final bond resistant to weathering, humidity and wide variations of temperature
Silite Silicone RTV, 10.3 oz, Cartridge, Red
D055-17130
- Single-component silicone for sealing panels and window plates
- bonding and sealing appliance ports
- attaching brackets, nameplates, and ceramic tile
- and bonding gaskets
- NSF certified for food equipment and acceptable for use in meat and poultry plants
Silite Silicone RTV, 3 oz, Tube, Clear
D055-17100
- Single-component silicone for sealing panels and window plates
- bonding and sealing appliance ports
- attaching brackets, nameplates, and ceramic tile
- and bonding gaskets
- NSF certified for food equipment and acceptable for use in meat and poultry plants
Silite Silicone RTV, 10.3 oz, Cartridge, Clear
D055-17150
- Single-component silicone for sealing panels and window plates
- bonding and sealing appliance ports
- attaching brackets, nameplates, and ceramic tile
- and bonding gaskets
- NSF certified for food equipment and acceptable for use in meat and poultry plants
Maximum Temperature Thread Sealant, 50 ml, Tube, White
D055-56750
- Lubricates threads for easy assembly and disassembly
- Won't shred or wear like PTFE tape
- High performance, solvent-resistant sealant locks and seals metal, tapered pipe threads and fittings
- Specifically formulated for aluminum, stainless steel, galvanized metal and other inert metals
- Temperature range from -65F to 400F (-54C to 204C)
Payment options
