Specialty Fasteners

View as Grid List
Sort by
AMERICAN POWER PULL 18650 Cable Puller, 4 ton Lifting, 5/16 in Dia Rope/Cable, 6 ft Lift

AMERICAN POWER PULL 18650 Cable Puller, 4 ton Lifting, 5/16 in Dia Rope/Cable, 6 ft Lift

A137-18650
Laminated steel ratchet wheel
+ -
Amerimax 67003PK Flashing Nail, 1-1/4 in L, Copper
BARON 251S-2 Bolt Snap, 551 lb Working Load, Stainless Steel
BARON 4202 Porch Swing Kit

BARON 4202 Porch Swing Kit

B095-06456
+ -
BARON 5025S-1/2 Leash Snap, 50 lb Working Load, Stainless Steel
BINDER LOAD LEVER 3/8 - 1/2IN

BINDER LOAD LEVER 3/8 - 1/2IN

B095-73858
+ -
BINDER LOAD RATCHET 3/8-1/2IN

BINDER LOAD RATCHET 3/8-1/2IN

B095-51640
+ -
BLUE POINT FASTENERS 22SGNDL2 Low Velocity Single Shot Load, 0.22 Caliber, Power Level: #2, Brown Co

BLUE POINT FASTENERS 22SGNDL2 Low Velocity Single Shot Load, 0.22 Caliber, Power Level: #2, Brown Co

B691-02000
  • For commercial and residential applications
+ -
BLUE POINT FASTENERS 22SGNDL4 Low Velocity Single Shot Load, 0.22 Caliber, Power Level: #4, Yellow C

BLUE POINT FASTENERS 22SGNDL4 Low Velocity Single Shot Load, 0.22 Caliber, Power Level: #4, Yellow C

B691-02002
  • For commercial and residential applications
+ -
BLUE POINT FASTENERS 27LS11L3 Low Velocity Load, 0.27 Caliber, Power Level: #3, Green Code, 6.8 mm D

BLUE POINT FASTENERS 27LS11L3 Low Velocity Load, 0.27 Caliber, Power Level: #3, Green Code, 6.8 mm D

B691-02013
  • For commercial and residential applications
+ -
BLUE POINT FASTENERS 27LS11L4 Low Velocity Load, 0.27 Caliber, Power Level: #4, Yellow Code, 6.8 mm

BLUE POINT FASTENERS 27LS11L4 Low Velocity Load, 0.27 Caliber, Power Level: #4, Yellow Code, 6.8 mm

B691-02014
  • For commercial and residential applications
+ -
CAMO 0344356 Edge Clip, 2-1/4 in L, Stainless Steel, Trim Head, Star Drive, Sharp Point

CAMO 0344356 Edge Clip, 2-1/4 in L, Stainless Steel, Trim Head, Star Drive, Sharp Point

C339-17892
  • EdgeClips are for 90 deg grooved deck installations with wood, composite, capped composite and PVC deck boards
  • One-pass fastening no partial installation is required
  • One-pass fastening no partial installation is required
  • Up to 88% stronger than leading deck board manufacturer's clips in lateral movement test
  • Fasten with the included never-miss guide or with the CAMO drive stand-up tool
+ -
Campbell 6203205 Load Binder, 2600 lb Working Load, Red, Painted
Campbell T4900324 Cold Shut, 3/16 in Trade, 400 lb Working Load, Mild Steel, Zinc

Campbell T4900324 Cold Shut, 3/16 in Trade, 400 lb Working Load, Mild Steel, Zinc

C102-18011
  • Connections for chain and attachments
  • When using cold shuts with chain, use one size larger than chain size
  • When using cold shuts with chain, use one size larger than chain size
  • With a hammer, drive the open end through the cold shut eye
+ -
CAP STAPLE 3/8X3/8 IN 2016CT

CAP STAPLE 3/8X3/8 IN 2016CT

N002-14786
  • Cap staples offer better holding power
  • Caps are a recommended best practice to seal out moisture
  • Caps are a recommended best practice to seal out moisture
+ -
GENERAL E-Z Pro 849 Pocket Hole Jig Kit

GENERAL E-Z Pro 849 Pocket Hole Jig Kit

G005-000051
+ -
HILLMAN 122602 Cut Tack, 7/16 in L, Galvanized Steel, Snap-Pak
Refine
×