Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
Products specifications
Finish
|
Zinc |
Inside Length
|
1-3/8 in |
Inside Width
|
7/16 in |
Material
|
Mild Steel |
Trade Size
|
5/16 in |
Working Load Limit
|
1300 lb |
Manufacturer
|
CAMPBELL |