Sort by
Position
Name Asc
Name Desc
Price Asc
Price Desc
Newest
Rating Asc
Rating Desc
Add to compare list
O009-27006
Thinsulate thermal middle layer and heavyweight polyester fleece lining Three layers Shoulder length Outer shell and binding are flame-retardant until washed Fleece lining and fasteners are flame-resistant
Add to compare list
O009-60642
Two layers Regular length Cotton twill and binding are flame-retardant until washed Fleece lining and fasteners are flame-resistant
Add to compare list
E005-16840
Water-resistant shell with soft fleece lining for warm and comfortable protection against the elements. Chin length for complete head and ear coverage. Lightweight and low-profile, this liner fits comfortably under hard hats or helmets. Elastic rim creates a snug fit while trapping heat and keeping cold out. Chin strap plus four hook and loop hard hat straps keep liner securely in place.
Add to compare list
E005-16842
Water-resistant shell with soft fleece lining for warm and comfortable protection against the elements. Shoulder length for complete head, neck and ear coverage. Lightweight and low-profile, this liner fits comfortably under hard hats or helmets. Elastic rim creates a snug fit while trapping heat and keeping cold out. Chin strap plus four hook and loop hard hat straps keep liner securely in place.
Add to compare list
E005-16841
Water-resistant shell with soft fleece lining for warm and comfortable protection against the elements. Shoulder length for complete head, neck and ear coverage. Lightweight and low-profile, this liner fits comfortably under hard hats or helmets. Elastic rim creates a snug fit while trapping heat and keeping cold out. Chin strap plus four hook and loop hard hat straps keep liner securely in place.
Add to compare list
E005-16850
Regular (chin) length design keeps head and ears warm and covered. Outer shell is made of 100% cotton twill to stand up to tough environments. Warm lining made of soft 100% polyester fleece. Lightweight and fits comfortably under a helmet or hard hat without feeling too bulky. Elastic gather at forehead closes the gap between liner and forehead to keep the heat in and cold out.
Add to compare list
E005-16852
Shoulder length design keeps head, ears and neck warm and covered. Outer shell is made of 100% cotton twill to stand up to tough environments. Warm lining made of soft 100% polyester fleece. Lightweight and fits comfortably under a helmet or hard hat without feeling too bulky. Elastic gather at forehead closes the gap between liner and forehead to keep the heat in and cold out.
Add to compare list
E005-16860
Regular (chin) length design keeps head and ears warm and covered. 60% Modacrylic/40% Cotton Twill blend outer shell with inherent flame resistance and self-extinguishing properties. Warm lining made of soft 100% polyester fleece. Lightweight and fits comfortably under a helmet or hard hat without feeling too bulky. Elastic gather at forehead closes the gap between liner and forehead to keep the heat in and cold out.
Add to compare list
E005-16862
Shoulder length design keeps head, ears and neck warm and covered. 60% Modacrylic/40% Cotton Twill blend outer shell with inherent flame resistance and self-extinguishing properties. Warm lining made of soft 100% polyester fleece. Lightweight and fits comfortably under a helmet or hard hat without feeling too bulky. Elastic gather at forehead closes the gap between liner and forehead to keep the heat in and cold out.
Add to compare list
E005-16870
Outer shell made of 100% cotton twill. Warm 100% polyester fleece lining. Attaches to all N-Ferno Winter Liners (sold separately) with hook and loop attachment straps for face coverage. Machine washable.
Add to compare list
E005-16871
The 100% cotton twill outer shell plus 100% polyester fleece lining stands up to tough environments. Lightweight design fits comfortably under a helmet or hard hat without feeling too bulky. Elastic gather at forehead closes the gap between liner and forehead to keep the heat in and cold out. Four evenly spaced hook and loop straps included on the outside of the liner to attach to hard hat or helmet suspension. Pockets by ears to hold hand warmers (sold separately).
Add to compare list
E005-16872
Flame-resistant outer shell is made of 60% modacrylic cotton and 40% cotton twill blend. Flame-resistant lining of 60% modacrylic cotton and 40% cotton fleece blend. This flame-resistant mouthpiece meets requirements of performance specification ASTM F1506; classified CAT2 according to NFPA 70E; Arc-rated; ATPV rating of 20 cal/cm2. Machine washable.
Add to compare list
E005-16874
Water-resistant outer shell with breathable 1 mm neoprene construction to trap heat in. Warm, soft fleece lining for additional comfort. Machine washable. Attaches to N-Ferno Winter Liners (sold separately) with hook and loop attachment straps for full-face coverage.
Add to compare list
E005-16876
Two-layer liner plus mouthpiece made of 60% modacrylic and 40% cotton twill blend. Flame-resistant outer shell and liner meets requirements of performance specification ASTM F1506; classified CAT2 according to NFPA 70E; Arc-rated; ATPV rating of 20 cal/cm2. Lightweight liner fits comfortably under a helmet or hard hat without feeling too bulky. Shoulder length design keeps head, ears and neck warm and covered. Elastic gather at forehead closes the gap between liner and forehead to keep the heat in and cold out.
Add to compare list
E005-16878
Three-layer thermal liner with 100% quilted polyester outer shell, foam insulation mid-layer and 100% polyester fleece lining. Two-layer mouthpiece with breathable 1 mm neoprene outer shell plus soft fleece lining. Lightweight design fits comfortably under a helmet or hard hat without feeling too bulky. Shoulder length to keep head, ears and neck warm and covered. Elastic gather at forehead closes the gap between liner and forehead to keep the heat in and cold out.
Add to compare list
E005-16887
Heat-trapping grid polyester fleece for warmth in mild to extreme conditions. Stretchable spandex/polyester blend comfortably fits most head sizes. Breathable for lightweight, comfortable warming. Low profile so you can wear alone or under a hard hat. Contoured design for full ear and forehead coverage.
Add to compare list
E005-16877
60% Modacrylic /40% Cotton Twill blend outer shell with inherent flame resistance and self-extinguishing properties. Foam insulation provides an additional layer of thermal protection for extremely cold environments. Warm lining made of 100% polyester fleece. Lightweight and fits comfortably under a helmet or hard hat without feeling too bulky. Elastic gather at forehead closes the gap between liner and forehead to keep the heat in and cold out.
Add to compare list
E005-16885
Flame-resistant for protection in environments where arc flash is a risk. Meets requirements of ASTM F1506 and NFPA 70E (CAT 4); Arc-rated; ATPV rating of 17 cal/cm2. Dual layers of FR modacrylic-cotton twill blend for comfortable warmth. Shoulder length for complete head, neck and ear coverage. Zip-off cap allows workers to remove bottom half for wear as a thermal FR skull cap.
Add to compare list
E005-16882
Shoulder length design keeps head, ears and neck warm and covered. Flame-resistant outer shell is mode of 60% Modacrylic /40% cotton twill blend. Flame-resistant lining is made of 60% Modacrylic /40% cotton fleece blend. Meets requirements of performance specification ASTM F1506; classified CAT2 according to NFPA 70E. Arc-rated; ATPV rating of 20 cal/cm2. Lightweight and fits comfortably under a helmet or hard hat without feeling too bulky.
Add to compare list
E005-16892
Shoulder length design keeps head, ears and neck warm and covered (ATPV rating of 27 cal/cm2). Flame reistant outer shell is made of Modacrylic cotton-blend twill. 3M FR Thinsulate for maximum warmth and protection in extremely cold environments. Flame-resistant lining is made of Modacrylic cotton-blend fleece. Meets requirements of performance specification ASTM F1506; classified CAT2 according to NFPA 70E. Arc-rated; ATPV rating of 27 cal/cm2.
Add to compare list
E005-16952
Quilted shell, foam mid-layer and sherpa lining for warm and comfortable protection against the elements. Polester sherpa lining keeps wearers warm and dry without bulk or discomfort. Shoulder length for complete head, neck and ear coverage. Lightweight with a low-profile, this liner fits comfortably under hard hats or helmets. Pockets by ears designed to hold warming packs (sold separately).
Add to compare list
E005-17623
Features breathable thermal protection with 10 g brushed acrylic fleece liner for soft comfort and warmth. Latex-coated palm is flexible and durable. Lightweight knit for easy handling of equipment and materials. Comfortable knit construction and elastic wrist forms a snug fit. Machine washable.
Add to compare list
E005-17625
Features breathable thermal protection with 10 g brushed acrylic fleece liner for soft comfort and warmth. Latex-coated palm is flexible and durable. Lightweight knit for easy handling of equipment and materials. Comfortable knit construction and elastic wrist forms a snug fit. Machine washable.
Add to compare list
E005-17633
Thermal protection, featuring a 15 g polyester with a soft 10 g brushed acrylic fleece liner for comfort and warmth. Waterproof, with fully coated latex protects hands from water and cold air. Superior grip with sandy, nitrile-dipped palm for secure gripping. Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials. Machine washable.