Search
All Categories
    Menu Close

    Router Bits

    View as Grid List
    Sort by
    F055-08709.jpg

    Freud 99-760 Router Bit Set, 3-3/4 in OAL, 1/2 in Dia Shank, Carbide

    F055-08709
    • Adjustable shims adjust panel groove down to 7/32 in (5.5 mm) and up to 3/8 in (9.5 mm) thick
    • Unique cutter geometry to eliminate tearout
    • Unique cutter geometry to eliminate tearout
    • Top portion of cutter, including bearing and spindle, is removed to produce the front of the long tenon profile
    • TiCo Hi-density carbide to maximize bit life and material finish
    + -
    F055-38479.jpg

    Freud 22-122 Router Bit, 1/2 in Dia Cutter, 2-3/4 in OAL, 1/4 in Dia Shank, 2 -Cutter, Carbide

    F055-38479
    • These bits produce smooth, intricate dovetail joints
    • These bits produce smooth, intricate dovetail joints
    • Cuts all composition materials, plywoods, hardwoods and softwoods
    + -
    F055-38622.jpg

    Freud 99-520 Router Bit, 2-1/2 in OAL, 1/2 in Dia Shank, Carbide

    F055-38622
    • Use 1/2 in height for 5/8 in stock, use 5/8 in height for 3/4 in stock
    • Cuts all composition materials, plywoods, hardwoods and softwoods
    • Cuts all composition materials, plywoods, hardwoods and softwoods
    • Produces raised panels for doors and paneling
    + -
    2283000.jpg

    Freud 70-104 Router Bit, 1-5/8 in OAL, 1/4 in Dia Shank, Carbide

    F055-01471
    • The large diameter end bores holes to allow nail or screw heads to enter the slot and the smaller diameter allows room for the shank of the nail or screw
    • Cuts all composition materials, plywoods, hardwoods and softwoods
    • Cuts all composition materials, plywoods, hardwoods and softwoods
    • Features chip breakers to reduce burning
    • For creates key holes for hanging plaques and sleeves
    + -
    2302933.jpg

    Freud 99-063 Router Bit, 2-5/8 in OAL, 1/2 in Dia Shank, Carbide

    F055-03498
    • Designed to complement the profile formed on the face of the door created by the 99-064 finger pull door edge bit
    • Precise shear angles provide a splinter-free finish
    • Precise shear angles provide a splinter-free finish
    • Cuts all composition materials, plywoods, hardwoods and softwoods
    • For creating a decorative inverted ogee profile on the face of door fronts
    + -
    3183563.jpg

    Freud 99-763 Router Bit Set, 3-3/4 in OAL, 1/2 in Dia Shank, Carbide

    F055-08711
    • Adjustable shims adjust panel groove down to 7/32 to 3/8 in thick
    • Unique cutter geometry to eliminate tearout
    • Unique cutter geometry to eliminate tearout
    • Top portion of cutter, including bearing and spindle, is removed to produce the front of the long tenon profile
    • TiCo Hi-density carbide to maximize bit life and material finish
    + -
    2282648.jpg

    Diablo 18-108 Round Nose Router Bit, 1-13/16 in OAL, 1/4 in Dia Shank, Carbide

    D099-01497
    • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers
    • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers
    + -
    2667095.jpg

    PORTER-CABLE 59381 Hinge Butt Template Kit, Plastic/Steel, For: All 1.5 hp and Larger Router

    P130-59381
    + -
    0551416.jpg

    TASK T24322 Router Bit, 1/4 in Dia Shank, Steel

    T089-24322
    • Dynamically balanced up to 24,000 rpm to reduce vibration and kickback
    • Heat-treated hardened tool steel shank
    • Heat-treated hardened tool steel shank
    • Non-stick powder-coated finish reduces friction and resin build-up and protects from corrosion
    • Precision bearing reduces heat buildup and vibration
    + -
    0224808.jpg

    Freud 99-764 Router Bit Set, 3-3/4 in OAL, 1/2 in Dia Shank, Carbide

    F055-08708
    • Adjustable shims adjust panel groove down to 7/32 to 3/8 in thick
    • Unique cutter geometry to eliminate tearout
    • Unique cutter geometry to eliminate tearout
    • Top portion of cutter, including bearing and spindle, is removed to produce the front of the long tenon profile
    • TiCo Hi-density carbide to maximize bit life and material finish
    + -
    F055-02890.jpg

    FORSTNER BIT SHEAR 1 7/8"

    F055-02890
    • Razor-sharp serrated edge for fast and flawless cutting
    • Quality forged construction for extended life
    • Quality forged construction for extended life
    • Ultra-sharp spur to ensure an accurate starting hole
    • Steep angled cutting edges, produce holes that are smooth and flat and create chisel-like curls for fast, clean chip removal
    + -
    F055-02892.jpg

    FORSTNER BIT SHEAR 1 5/8"

    F055-02892
    • Razor-sharp serrated edge for fast and flawless cutting
    • Quality forged construction for extended life
    • Quality forged construction for extended life
    • Ultra-sharp spur to ensure an accurate starting hole
    • Steep angled cutting edges, produce holes that are smooth and flat and create chisel-like curls for fast, clean chip removal
    + -
    F055-38523.jpg

    Freud 04-111 Router Bit, 7/32 in Dia Cutter, 2 in OAL, 1/4 in Dia Shank, 2 -Cutter, Carbide

    F055-38523
    • Freud straight bits cut smoother than other bits because of the precise shear and hook angles
    • End of bit relief allows for fast plunging
    • End of bit relief allows for fast plunging
    + -
    F055-38096.jpg

    Freud 40-114 Router Bit, 1-5/8 in Dia Cutter, 2-9/16 in OAL, 1/2 in Dia Shank, 2 -Cutter, Carbide

    F055-38096
    • Chamfer size easily adjusts by changing the height of the bit
    • Cuts all composition materials, plywoods, hardwoods and softwoods
    • Cuts all composition materials, plywoods, hardwoods and softwoods
    + -
    2963189.jpg

    Freud 80-102 Router Bit, 2-3/16 in OAL, 1/4 in Dia Shank, Carbide

    F055-38426
    • Forms a single bead with a square shoulder
    • Commonly used by remodelers to match base moldings in historic homes
    • Commonly used by remodelers to match base moldings in historic homes
    • Cuts all composition materials, plywoods, hardwoods and softwoods
    • For molding detail in restoration work
    + -
    0235499.jpg

    ROUTER BIT SPIRAL 1/8" UP

    F055-39001
    • Freud's solid carbide up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits
    • Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods
    • Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods
    • Computer-designed flutes provide chip removal required in production settings
    + -
    D032-00650.jpg

    DREMEL 650 Router Bit, 1/8 in Dia Cutter, 3/4 in L Cutting, 2 in OAL, 1/8 in Dia Shank, 2 -Cutter, H

    D032-00650
    • Ideal for routing, inlaying and mortising in wood and other soft materials
    • Use with Dremel model 230 and 330 router attachment
    • Use with Dremel model 230 and 330 router attachment
    • Also can be used with model 335 plunge router attachment
    • Also can be used with model 335 plunge router attachment
    + -
    D032-00615.jpg

    DREMEL 615 Router Bit, 1/8 in Dia Shank, HSS

    D032-00615
    • High-speed steel for durability
    • High-speed steel for durability
    + -
    F055-02897.jpg

    FORSTNER BIT SHEAR 1"

    F055-02897
    • Razor-sharp serrated edge for fast and flawless cutting
    • Quality forged construction for extended life
    • Quality forged construction for extended life
    • Ultra-sharp spur to ensure an accurate starting hole
    • Steep angled cutting edges, produce holes that are smooth and flat and create chisel-like curls for fast, clean chip removal
    + -
    F055-03907.jpg

    Freud 16-560 Router Bit, 1/2 in Dia Cutter, 2-7/16 in OAL, 1/4 in Dia Shank, 2 -Cutter, Carbide

    F055-03907
    • Freud's mortising bits are designed with deep center gullets for maximum material removal without chip loading
    • Cuts all composition materials, plywoods, hardwoods and softwoods
    • Cuts all composition materials, plywoods, hardwoods and softwoods
    + -
    F055-38003.jpg

    Freud 04-104 Router Bit, 1/4 in Dia Cutter, 2 in OAL, 1/4 in Dia Shank, 2 -Cutter, Carbide

    F055-38003
    • Freud straight bits cut smoother than other bits because of the precise shear and hook angles
    • End of bit relief allows for fast plunging
    • End of bit relief allows for fast plunging
    + -
    F055-38024.jpg

    Freud 12-156 Router Bit, 3/4 in Dia Cutter, 3 in OAL, 3/4 in Dia Shank, 2 -Cutter, Carbide

    F055-38024
    • Freud straight bits cut smoother than other bits because of the precise shear and hook angles
    • End of bit relief allows for fast plunging
    • End of bit relief allows for fast plunging
    + -
    F055-38025.jpg

    Freud 12-172 Router Bit, 1 in Dia Cutter, 3 in OAL, 1/2 in Dia Shank, 2 -Cutter, Carbide

    F055-38025
    • Freud straight bits cut smoother than other bits because of the precise shear and hook angles
    • End of bit relief allows for fast plunging
    • End of bit relief allows for fast plunging
    + -
    F055-38040.jpg

    Freud 18-112 Router Bit, 3/4 in Dia Cutter, 2 in OAL, 1/4 in Dia Shank, 2 -Cutter, Carbide

    F055-38040
    • Add a personal touch to cabinet doors, drawer fronts and fluted millwork or use these bits to engrave wood signs
    • Cuts all composition materials, plywoods, hardwoods and softwoods
    • Cuts all composition materials, plywoods, hardwoods and softwoods
    + -
    Refine
    ×