CRC branded products
Sort by
82 products found.
C086-05081
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Maximizes carburetor performance
- Quickly dissolves carburetor deposits such as gum, sludge and varnish to improve fuel system performance and enhance fuel economy
- Harmless to catalytic converters and oxygen sensors
C086-02016
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Formula contains no known ozone depleting substances or VOCs
- Non-chlorinated, non-flammable, plastic safe formula is an optimal alternative to CFC, HCFC, and flammable contact cleaners
- NSF K2 Registered
- Contains no VOCs
- Contains no Class I or Class II ozone depleting chemicals
C086-03140
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Removes grease, oil, dirt and other contaminants
- Protects with a non-hardening film
- Non-Corrosive and Non-Staining
- M.S.D.(L.) material safety data label helps comply with OSHA Hazard Communications Standard 29 CFR 1910.1200
- Replaces CFCs and chlorinated solvent-based cleaners
C086-03150
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Designed to remove build ups of dirt, moisture, dust, flux, or oxides on contacts
- While it is safe for use on metal, do not spray this product on plastics
- Effective alternative to 141b-based cleaners when sensitive plastics are not a concern
- Evaporates quickly and leaves no residue
- Has no flash or fire point and contains no Class I or Class II Ozone Depleting Chemicals
C086-02140
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Designed to remove build ups of dirt, moisture, dust, flux, or oxides on contacts
- While it is safe for use on metal, do not spray this product on plastics
- Effective alternative to 141b-based cleaners when sensitive plastics are not a concern
- Evaporates quickly and leaves no residue
- Has no flash or fire point and contains no Class I or Class II Ozone Depleting Chemicals
C086-35903
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- General purpose, anti-seize lubricant can be used in a wide variety of applications
- Prevents threaded fasteners and close-fitting parts from locking together
- Electrically conductive, does not insulate and interrupt current flow
- Does not compromise integrity of soft metals
- Will Not Harden
C086-00008
IN STOCK NOW : 17 |
Ships in 2-3 DAYS : 71 |
- For use on energized equipment
C086-14050
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Reduces heat and friction to ease cutting and increase cutting tool life
- Sulfur-free, low odor formula
- Excellent anti-weld properties
- Foaming aerosol formulation clings to vertical surfaces
- Compatible with all manual and motor-driven threading equipment
C086-36400
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- High compatible thickener base reduces equipment failure risk during conversion break-in process
- Distinctive red color makes it easy to identify during and after lubrication
- Offers superior protection to lubricate a wide variety of severe duty drilling, industrial, mining, and construction equipment
- Timken load of 80 lb
C086-03094
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Ideal where a dry lubricant is required or where petroleum products must be avoided
- Resists dirt, dust, and oil build-up
- Wide effective temperature range up to 850 F constant
C086-14085
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Removes dirt and dust from any surface without damaging sensitive components or surface finish
- Non-flammable, no residue and non-abrasive
- Safe on all plastics
C086-05185
IN STOCK NOW : 1140 |
Ships in 2-3 DAYS : 11 |
- Provides a powerful blast of product to remove embedded debris without damaging sensitive components or surface finishes
- Reaches areas where normal hand dusting cannot
- 100% Ozone safe
- Moisture-free
- Non-ozone depleting
C086-02094
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 51 |
- Superior lubricity for metal and non-metal surfaces
- Non-hardening lubricant minimizes corrosion
- Wide effective temperature range
- Convenient 360 spray valve - can be sprayed from any position
- Low surface tension permits better coverage and deeper penetration
C086-02180
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Effective degreasing action with fast evaporation and no residue
- Non-flammable, VOC exempt formula is designed for energized equipment use only
- Non-staining, non-corrosive and non-conductive
- High Dielectric Strength of 37,500 Volts
- Contains no 1,1,1-Trichloroethane
C086-03030
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Reduces friction and galling even on metal-to-metal contact areas
- High temperature (-100 to 450 F), high pressure (withstands 1200 psi Falex test)
- High grade release and parting agent
- Clear, non-staining, odorless film resists moisture
- Convenient 360 spray valve - can be sprayed from any position
C086-30814
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- For use on food processing equipment
- Penetrates to loosen rust, scale, dirt, and corrosion
- Perma-Lock 2-way integrated actuator
- Meets FDA Regulation CFR 21-178.3570 for incidental food contact
- Non-silicone formula is virtually colorless and odorless
C086-14086
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Non-flammable, safe on plastics
- Dries instantly, leaves no residue
- Non-Abrasive
- Contains no Class I or Class II ozone depleting chemicals
C086-03120
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Non-chlorinated, zero VOC formula for cleaning where chlorinated solvents are not acceptable
- High flashpoint of 180 F
- Effectively removes soils with no residue build-up
- Use caution on plastics
- Low odor compound, unlike citrus-based products
C086-03095
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Effectively removes grease, oil, tar, and more to increase operating efficiency of equipment
- Evaporates quickly
- Leaves no residue and has no flash or fire point, making it an excellent alternative to 1,1,1-based cleaners
- Use caution on plastics
- Contains no Class I or Class II ozone depleting chemicals
C086-03125
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- High flash point
- Leaves no residue