Drilling & Milling Bits
FORSTNER BIT SHEAR 1 5/8"
F055-02892
- Razor-sharp serrated edge for fast and flawless cutting
- Quality forged construction for extended life
- Quality forged construction for extended life
- Ultra-sharp spur to ensure an accurate starting hole
- Steep angled cutting edges, produce holes that are smooth and flat and create chisel-like curls for fast, clean chip removal
FORSTNER BIT SHEAR 1 7/8"
F055-02890
- Razor-sharp serrated edge for fast and flawless cutting
- Quality forged construction for extended life
- Quality forged construction for extended life
- Ultra-sharp spur to ensure an accurate starting hole
- Steep angled cutting edges, produce holes that are smooth and flat and create chisel-like curls for fast, clean chip removal
FORSTNER BIT SHEAR 1"
F055-02897
- Razor-sharp serrated edge for fast and flawless cutting
- Quality forged construction for extended life
- Quality forged construction for extended life
- Ultra-sharp spur to ensure an accurate starting hole
- Steep angled cutting edges, produce holes that are smooth and flat and create chisel-like curls for fast, clean chip removal
FORSTNER BIT SHEAR 3/8"
F055-02902
- Razor-sharp serrated edge for fast and flawless cutting
- Quality forged construction for extended life
- Quality forged construction for extended life
- Ultra-sharp spur to ensure an accurate starting hole
- Steep angled cutting edges, produce holes that are smooth and flat and create chisel-like curls for fast, clean chip removal
Freud 04-104 Router Bit, 1/4 in Dia Cutter, 2 in OAL, 1/4 in Dia Shank, 2 -Cutter, Carbide
F055-38003
- Freud straight bits cut smoother than other bits because of the precise shear and hook angles
- End of bit relief allows for fast plunging
- End of bit relief allows for fast plunging
Freud 04-111 Router Bit, 7/32 in Dia Cutter, 2 in OAL, 1/4 in Dia Shank, 2 -Cutter, Carbide
F055-38523
- Freud straight bits cut smoother than other bits because of the precise shear and hook angles
- End of bit relief allows for fast plunging
- End of bit relief allows for fast plunging
Freud 04-130 Router Bit, 1/2 in Dia Cutter, 2-1/4 in OAL, 1/4 in Dia Shank, 2-Cutter, Carbide
F055-38009
- Freud straight bits cut smoother than other bits because of the precise shear and hook angles
- End of bit relief allows for fast plunging
- End of bit relief allows for fast plunging
- For clean cuts in any wood or composite
Freud 12-110 Router Bit, 3/8 in Dia Cutter, 2-7/8 in OAL, 1/2 in Dia Shank, 2 -Cutter, Carbide
F055-38015
- Freud straight bits cut smoother than other bits because of the precise shear and hook angles
- End of bit relief allows for fast plunging
- End of bit relief allows for fast plunging
Freud 12-118 Router Bit, 1/2 in Dia Cutter, 2-7/8 in OAL, 1/2 in Dia Shank, 2-Cutter, Carbide
F055-38017
- Freud straight bits cut smoother than other bits because of the precise shear and hook angles
- End of bit relief allows for fast plunging
- End of bit relief allows for fast plunging
- For clean cuts in any wood or composite
Freud 12-130 Router Bit, 1/2 in Dia Cutter, 4-3/8 in OAL, 1/2 in Dia Shank, 2 -Cutter, Carbide
F055-38020
- Freud straight bits cut smoother than other bits because of the precise shear and hook angles
- End of bit relief allows for fast plunging
- End of bit relief allows for fast plunging
Freud 12-156 Router Bit, 3/4 in Dia Cutter, 3 in OAL, 3/4 in Dia Shank, 2 -Cutter, Carbide
F055-38024
- Freud straight bits cut smoother than other bits because of the precise shear and hook angles
- End of bit relief allows for fast plunging
- End of bit relief allows for fast plunging
Freud 12-172 Router Bit, 1 in Dia Cutter, 3 in OAL, 1/2 in Dia Shank, 2 -Cutter, Carbide
F055-38025
- Freud straight bits cut smoother than other bits because of the precise shear and hook angles
- End of bit relief allows for fast plunging
- End of bit relief allows for fast plunging
Freud 16-560 Router Bit, 1/2 in Dia Cutter, 2-7/16 in OAL, 1/4 in Dia Shank, 2 -Cutter, Carbide
F055-03907
- Freud's mortising bits are designed with deep center gullets for maximum material removal without chip loading
- Cuts all composition materials, plywoods, hardwoods and softwoods
- Cuts all composition materials, plywoods, hardwoods and softwoods
Freud 18-112 Router Bit, 3/4 in Dia Cutter, 2 in OAL, 1/4 in Dia Shank, 2 -Cutter, Carbide
F055-38040
- Add a personal touch to cabinet doors, drawer fronts and fluted millwork or use these bits to engrave wood signs
- Cuts all composition materials, plywoods, hardwoods and softwoods
- Cuts all composition materials, plywoods, hardwoods and softwoods
Freud 20-104 Router Bit, 1/4 in Dia Shank, 2-Cutter, Carbide
F055-38047
- Freud's "V" grooving bits are designed to cut deep or shallow "V" grooves
- Cuts all composition materials, plywoods, hardwoods and softwoods
- Cuts all composition materials, plywoods, hardwoods and softwoods
- Ideal for making signs and adding decorative accents to furniture and plaques
Freud 22-112 Router Bit, 1/2 in Dia Cutter, 2-1/4 in OAL, 1/2 in Dia Shank, 2-Cutter, Carbide
F055-38053
- These bits produce smooth, intricate dovetail joints
- Cuts all composition materials, plywoods, hardwoods and softwoods
- Cuts all composition materials, plywoods, hardwoods and softwoods
- For strong joint in wood drawers, boxes
Freud 30-102 Router Bit, 7/8 in Dia Cutter, 2-3/16 in OAL, 1/4 in Dia Shank, 2-Cutter, Carbide
F055-38059
- Cuts all composition materials, plywoods, hardwoods and softwoods
- For decorative edges and concave shapes
- For decorative edges and concave shapes
Freud 32-102 Router Bit, 1-1/4 in Dia Cutter, 2-1/4 in OAL, 1/2 in Dia Shank, 2-Cutter, Carbide
F055-38065
- Produces super-smooth cuts on both surfaces of the rabbet
- Steel pilots can be removed from bits and used with edge guides for wider rabbets
- Steel pilots can be removed from bits and used with edge guides for wider rabbets
- Cuts all composition materials, plywoods, hardwoods and softwoods
- For joinery and cabinetry applications
Freud 32-504 Router Bit, 1-3/8 in Dia Cutter, 2-1/4 in OAL, 1/4 in Dia Shank, 2-Cutter, Carbide
F055-38508
- Cuts all composition materials, plywoods, hardwoods and softwoods
- 32-504, 32-524 and 32-526 can also be used as flush cutting trim bits
- 32-504, 32-524 and 32-526 can also be used as flush cutting trim bits
- Comes with interchangeable bearings to cut rabbets of different depths
- Produces super-smooth cuts on both surfaces of the rabbet
Freud 32-524 Router Bit, 1-3/8 in Dia Cutter, 2-1/4 in OAL, 1/2 in Dia Shank, 2 -Cutter, Carbide
F055-38509
- Cuts all composition materials, plywoods, hardwoods and softwoods
- 32-504, 32-524 and 32-526 can also be used as flush cutting trim bits
- 32-504, 32-524 and 32-526 can also be used as flush cutting trim bits
- Comes with interchangeable bearings to cut rabbets of different depths
- Produces super-smooth cuts on both surfaces of the rabbet
Freud 34-110 Router Bit, 1-1/8 in Dia Cutter, 2-3/16 in OAL, 1/4 in Dia Shank, 4 -Cutter, Carbide
F055-38069
- Use roundover bits to soften furniture edges
- For beading work, equip the bits with a Freud 62-102 bearing and 62-311 step washer
- For beading work, equip the bits with a Freud 62-102 bearing and 62-311 step washer
- Cuts all composition materials, plywoods, hardwoods and softwoods
Freud 34-120 Router Bit, 1-1/4 in Dia Cutter, 2-1/2 in OAL, 1/2 in Dia Shank, 4 -Cutter, Carbide
F055-38073
- Use roundover bits to soften furniture edges
- For beading work, equip the bits with a Freud 62-102 bearing and 62-311 step washer
- For beading work, equip the bits with a Freud 62-102 bearing and 62-311 step washer
- Cuts all composition materials, plywoods, hardwoods and softwoods
Freud 34-124 Router Bit, 1-1/4 in Dia Cutter, 2-5/8 in OAL, 1/2 in Dia Shank, 4-Cutter, Carbide
F055-38074
- Use roundover bits to soften furniture edges
- For beading work, equip the bits with a Freud 62-102 bearing and 62-311 step washer
- For beading work, equip the bits with a Freud 62-102 bearing and 62-311 step washer
- Cuts all composition materials, plywoods, hardwoods and softwoods
- For soften furniture edges and create decorative beads