Need More Help? 718-499-1119
Search
Drilling & Milling Bits
Bosch 85268MC Router Bit, 3/8 in Dia Cutter, 2-5/8 in OAL, 1/4 in Dia Shank, 2-Cutter, Steel
B083-35181
- Control cut design helps minimize kickback
- Micrograin carbide tips provide excellent wear resistance and long life
- Micrograin carbide tips provide excellent wear resistance and long life
- Shielded, compact ball-bearing pilot guides bit along edge of material
- For fast, smooth, flush trim cuts
Bosch 85911MC Router Bit, 1/4 in Dia Cutter, 2-1/2 in OAL, 1/4 in Dia Shank, 2-Cutter, Carbide
B083-35175
- Up cut design yields excellent chip removal for a smooth finish
- Balanced cutting with minimal vibration
- Balanced cutting with minimal vibration
- Solid carbide for durability
- For high-duty cycle applications
Bosch 85613MC Router Bit, 1/4 in Dia Cutter, 2-1/4 in OAL, 1/4 in Dia Shank, 2-Cutter, Steel
B083-35174
- Two flute design provides a smooth finish and good feed rates
- Micrograin carbide tips give excellent smoothness of cut and long life
- Micrograin carbide tips give excellent smoothness of cut and long life
- Balanced cutting with minimal vibration
- Specially-designed tips provide fast plunge cutting
Bosch 85601MC Router Bit, 1/2 in Dia Cutter, 1-1/2 in L Cutting, 4-1/4 in OAL, 1/2 in Dia Shank, 2-C
B083-35186
- Micrograin carbide-tip router bit design ensures consistently smooth finish cuts, with superior wear resistance
- Double-flute template trim bit provides smooth cuts for laminate trimming, cutouts and pattern cutting
- Double-flute template trim bit provides smooth cuts for laminate trimming, cutouts and pattern cutting
- Two ball bearings designed to widen the bearing surface and reduce template wear
- Reinforced shanks feature fully hardened and tempered steel shanks that provide ultimate durability
Bosch 85270MC Router Bit, 1 in Dia Cutter, 2-1/8 in OAL, 1/4 in Dia Shank, 2-Cutter, Steel
B083-35197
- Control cut design helps minimize kickback
- Smoothly radius edge requires little or no sanding before applying finish
- Smoothly radius edge requires little or no sanding before applying finish
- Micrograin carbide tips provide excellent wear resistance and long life
- Compact ball-bearing pilot guides bit along edge of material
Bosch 85682MC Router Bit, 3/4 in Dia Cutter, 2-1/2 in OAL, 1/4 in Dia Shank, 1-Cutter, Steel
B083-35188
- Top mounted ball bearing rides against template for pattern routing
- Micrograin carbide tips provide excellent wear resistance and long life
- Micrograin carbide tips provide excellent wear resistance and long life
- Balanced cutting with minimal vibration
- Shielded, compact ball-bearing pilot guides bit along edge of material
Bosch 85295MC Router Bit, 1-1/8 in Dia Cutter, 2-1/16 in OAL, 1/4 in Dia Shank, 1-Cutter, Steel
B083-35202
- Creates smoothly radiused edges on boards and panels
- Smoothly radius edge requires little or no sanding before applying finish
- Smoothly radius edge requires little or no sanding before applying finish
- Micrograin carbide tips provide excellent wear resistance and long life
- Control cut design helps minimize kickback
Bosch 85293MC Router Bit, 7/8 in Dia Cutter, 2 in OAL, 1/4 in Dia Shank, 1-Cutter, Steel
B083-35200
- Creates smoothly radiused edges on boards and panels
- Smoothly radius edge requires little or no sanding before applying finish
- Smoothly radius edge requires little or no sanding before applying finish
- Micrograin carbide tips provide excellent wear resistance and long life
- Control cut design helps minimize kickback
Bosch 85294MC Router Bit, 1 in Dia Cutter, 2 in OAL, 1/4 in Dia Shank, 1-Cutter, Steel
B083-35201
- Creates smoothly radiused edges on boards and panels
- Smoothly radius edge requires little or no sanding before applying finish
- Smoothly radius edge requires little or no sanding before applying finish
- Micrograin carbide tips provide excellent wear resistance and long life
- Control cut design helps minimize kickback
Bosch 85434MC Router Bit, 3/4 in Dia Cutter, 1 in L Cutting, 2-15/16 in OAL, 1/2 in Dia Shank, 2-Cut
B083-35206
- Micrograin carbide-tip router bit design ensures consistently smooth finish cuts, with superior wear resistance
- Double-flute template trim bit provides smooth cuts for laminate trimming, cutouts and pattern cutting
- Double-flute template trim bit provides smooth cuts for laminate trimming, cutouts and pattern cutting
- Two ball bearings designed to widen the bearing surface and reduce template wear
- Reinforced shanks feature fully hardened and tempered steel shanks that provide ultimate durability
Bosch 85296MC Router Bit, 1-1/4 in Dia Cutter, 2-3/16 in OAL, 1/4 in Dia Shank, 1-Cutter, Steel
B083-35203
- Creates smoothly radiused edges on boards and panels
- Smoothly radius edge requires little or no sanding before applying finish
- Smoothly radius edge requires little or no sanding before applying finish
- Micrograin carbide tips provide excellent wear resistance and long life
- Control cut design helps minimize kickback
Bosch 85595MC Router Bit, 1-1/2 in Dia Cutter, 2-5/8 in OAL, 1/2 in Dia Shank, 2-Cutter, Steel
B083-35217
- Creates smoothly radiused edges on boards and panels
- Smoothly radius edge requires little or no sanding before applying finish
- Smoothly radius edge requires little or no sanding before applying finish
- Micrograin carbide tips provide excellent wear resistance and long life
- Control cut design helps minimize kickback
Bosch 85448MC Router Bit, 3/4 in Dia Cutter, 1-9/16 in OAL, 1/4 in Dia Shank, 2-Cutter, Steel
B083-35224
- Cuts rounded surface grooves used in a variety of applications including doors and columns
- Control cut design helps minimize kickback
- Control cut design helps minimize kickback
- Micrograin carbide tips provide excellent wear resistance and long life
- For cutting rounded grooves and used in a variety of applications ranging from doors to columns
Bosch 85581MC Router Bit, 1-1/2 in Dia Cutter, 5/8 in L Cutting, 2-3/16 in OAL, 1/4 in Dia Shank, 2-
B083-35213
- Micrograin carbide-tip router bit design ensures consistently smooth finish cuts, with superior wear resistance
- Double-flute template trim bit provides smooth cuts for laminate trimming, cutouts and pattern cutting
- Double-flute template trim bit provides smooth cuts for laminate trimming, cutouts and pattern cutting
- Two ball bearings designed to widen the bearing surface and reduce template wear
- Reinforced shanks feature fully hardened and tempered steel shanks that provide ultimate durability
Bosch 84624MC Router Bit, 1-7/8 in Dia Cutter, 3 in OAL, 1/2 in Dia Shank, 4-Cutter, Steel
B083-35233
- Designed to cut tongue and grooves on 1/2 in through 3/4 in thick material
- Full assembly used to cut the tongue, removing one slot cutter will cut the groove
- Full assembly used to cut the tongue, removing one slot cutter will cut the groove
- Micrograin carbide tips provide excellent wear resistance and long life
- For cutting the tongue, groove and to remove one slotting cutter
Bosch 85494MC Router Bit, 1 in Dia Cutter, 2 in OAL, 1/4 in Dia Shank, 1-Cutter, Steel
B083-35208
- Control cut design helps minimize kickback
- Smoothly radius edge requires little or no sanding before applying finish
- Smoothly radius edge requires little or no sanding before applying finish
- Micrograin carbide tips provide excellent wear resistance and long life
- Compact ball-bearing pilot guides bit along edge of material
Bosch 85529MC Cutter Bit, 1-7/8 in Dia Cutter, 1/8 in L Cutting, 5/16 in Dia Shank, Steel
B083-35236
- Three-wing cutter with 5/16 in arbor hole
- Carbide tips on steel body for long life
- Carbide tips on steel body for long life
- Three-wing design for smooth cutting
- Three-wing design for smooth cutting
ARTU 01075 Drill Bit, 9/16 in Dia, 6-1/4 in OAL, Jobber Bit, Parabolic Flute, 3/8 in Dia Shank, Redu
A133-01075
- Chrome vanadium steel shank for enormous strength and flexibility
- Requires no center punch and eliminates walking
- Requires no center punch and eliminates walking
- The blend and high tech bonding of cobalt and tungsten carbide allows bit to withstand temperatures up to 2000 deg F
- Special negative back grinding enables the tip to bore through materials with a filing action, not cutting
ARTU 01080 Drill Bit, 5/8 in Dia, 6-1/8 in OAL, Jobber Bit, Parabolic Flute, 3/8 in Dia Shank, Reduc
A133-01080
- Chrome vanadium steel shank for enormous strength and flexibility
- Requires no center punch and eliminates walking
- Requires no center punch and eliminates walking
- The blend and high tech bonding of cobalt and tungsten carbide allows bit to withstand temperatures up to 2000 deg F
- Special negative back grinding enables the tip to bore through materials with a filing action, not cutting
ARTU 01175 Drill Bit, 5/8 in Dia, 16 in OAL, Jobber Bit, Parabolic Flute, 1/2 in Dia Shank, Reduced
A133-01175
- Chrome vanadium steel shank for enormous strength and flexibility
- Outlasts regular carbide-tipped bits
- Outlasts regular carbide-tipped bits
- Requires no center punch and eliminates walking
- Resharpens on a high-quality silicon carbide grinding wheel
ARTU 01155 Drill Bit, 5/16 in Dia, 16 in OAL, Jobber Bit, Parabolic Flute, Straight Shank
A133-01155
- Chrome vanadium steel shank for enormous strength and flexibility
- Outlasts regular carbide-tipped bits
- Outlasts regular carbide-tipped bits
- Requires no center punch and eliminates walking
- Resharpens on a high-quality silicon carbide grinding wheel
ARTU 01160 Drill Bit, 3/8 in Dia, 16 in OAL, Jobber Bit, Parabolic Flute, Straight Shank
A133-01160
- Chrome vanadium steel shank for enormous strength and flexibility
- Outlasts regular carbide-tipped bits
- Outlasts regular carbide-tipped bits
- Requires no center punch and eliminates walking
- Resharpens on a high-quality silicon carbide grinding wheel
ARTU 01185 Drill Bit, 7/8 in Dia, 16 in OAL, Jobber Bit, Parabolic Flute, 1/2 in Dia Shank, Reduced
A133-01185
- Chrome vanadium steel shank for enormous strength and flexibility
- Outlasts regular carbide-tipped bits
- Outlasts regular carbide-tipped bits
- Requires no center punch and eliminates walking
- Resharpens on a high-quality silicon carbide grinding wheel
Bosch 85316MC Router Bit, 1/2 in Dia Cutter, 3/8 in L Cutting, 2 in OAL, 1/4 in Dia Shank, 2-Cutter,
B083-46544
- Micrograin carbide-tip router bit design ensures consistently smooth finish cuts, with superior wear resistance
- Double-flute template trim bit provides smooth cuts for laminate trimming, cutouts and pattern cutting
- Double-flute template trim bit provides smooth cuts for laminate trimming, cutouts and pattern cutting
- Two ball bearings designed to widen the bearing surface and reduce template wear
- Reinforced shanks feature fully hardened and tempered steel shanks that provide ultimate durability
Payment options
