Drilling & Milling Bits
IRWIN SPEEDBOR 88601 Woodboring Bit Extension, 1/4 in Shank, 12 in L, HSS
I008-88601
- Not for use with quick change wood boring bits
- Not for use with quick change wood boring bits
Irwin Tools 324010 Drill Bit, 9/16" x 17" x 23" Spline 2C
IRW00795
Irwin Tools 324010 Drill Bit, 9/16" x 17" x 23" Spline 2C
IRWIN Unibit 10220 Step Drill Bit, 9/16 to 1 in Dia, 1 -Flute, 7/16 in Dia Shank, Hex Shank
I008-10220
- Single-flute cutting edge for greater control through steps
- Three flatted shank prevents slipping in drill chuck
- Three flatted shank prevents slipping in drill chuck
- Patented single-flute cutting edge gives the user a true round hole every time
IRWIN Unibit 10235 Step Drill Bit, 1/4 to 1-3/8 in Dia, 3-1/8 in OAL, Stepped Dill Bit, 1 -Flute, 1/
I008-10105
- Single-flute cutting edge for greater control through steps
- Hex shank prevents slipping in drill chuck
- Hex shank prevents slipping in drill chuck
- New speed point tip penetrates faster than previous Unibits and prevents walking
- New SpeedPoint tip penetrates faster than previous Unibits and prevents walking
IRWIN Unibit 15101ZR Step Drill Bit, 1/8 to 1/2 in Dia, 3-1/4 in OAL, Self-Starting, 1 -Flute, 1/4 i
I008-15101
- Single-flute cutting edge for greater control through steps
- 3-flatted shank prevents slipping in drill chuck
- 3-flatted shank prevents slipping in drill chuck
- New SpeedPoint tip penetrates faster than previous Unibits and prevents walking
Kreg DDS Square Driver Combo
K087-34511
- Quick change compatible
- Solid, one-piece construction
- Solid, one-piece construction
Kreg KHI-PULL Cabinet Hardware Jig, Polymer
K050-80663
- Adjustable guides for accurate hole placement
- Built-in measuring scales for repeatable results
- Built-in measuring scales for repeatable results
- Versatile for mounting single and multi-hole knobs
- Adjustable edge guide for easy positioning
Kreg KHI-SLIDE Drawer Slide Jig, For: Face-Frame and Frameless Cabinet
K087-80664
- Accurate slide positioning with built-in indexing tabs
- Repeatable results without measuring and marking
- Repeatable results without measuring and marking
- Reversible to mount slides to cabinet and drawer box
- Secure for holding slides in place as you work
Kreg KPHJ320 Pocket-Hole Jig, 1/2 to 1-1/2 in Clamping, 2 -Guide Hole, Nylon/Steel/Thermoplastic Ela
K087-80956
- Easy-set drill bit engraved bit markings and stop collar with sight window make bit setup simple
- Material thickness gauge/hex wrench helps set correct drill-bit depth, doubles as a hex wrench
- Material thickness gauge/hex wrench helps set correct drill-bit depth, doubles as a hex wrench
- Glass-filled nylon, hardened steel, thermoplastic elastomer
- Portable jig for creating pocket-hole joints
Kreg MKJKIT Pocket-Hole Jig Kit, 1 -Guide Hole, Nylon, For: 1/2 to 1-1/2 in Thick Materials
K050-23211
- Simplistic, compact design
- Unlimited material thickness and width positioning
- Unlimited material thickness and width positioning
- Hardened-steel Kreg drill guides feature a lifetime warranty
- Wood chip relief hole for easy drilling
Kreg P-PIN Wood Peg, 19/64 in Dia, Pine, 50, Pack
K050-33165
- Hide or decoratively accent exposed pocket holes
- High-quality, trimmable, solid-wood plugs
- High-quality, trimmable, solid-wood plugs
Kreg R3 Pocket Hole System, 2 -Guide Hole, Glass Filled Nylon
K087-22311
- Easily join materials from 1/2 to 11/2 in thick in 1/8 in increments
- Positioning sliders allow you to easily adjust within nine depth settings
- Positioning sliders allow you to easily adjust within nine depth settings
- Dual wood-chip holes keep your drill bit clear of excess wood chips
- Two hardened-steel Kreg drill bit guides
Lenox 1779774 Hole Saw Arbor, 1/2 in - 20 Thread, 1/2 in Shank, Hex Shank
I008-30001
- Adjustable pilot bit
- Starts on contact, split point pilot drill for faster penetration and less walking
- Starts on contact, split point pilot drill for faster penetration and less walking
Lenox Diamond 121074DGDS Hole Saw, 1/4 in Dia, 1-1/8 in D Cutting, 3/8 in Arbor
L055-12107
- Continuous and brazed edge lasts longer in tile and stone
- Durable and robust design for greater durability in tough applications
- Durable and robust design for greater durability in tough applications
- Fast and easy cutting with low torque and little pressure
- Oversized slot in hole saw for easy plug removal
Lenox Diamond 121085DGDS Hole Saw, 5/16 in Dia, 1-1/8 in D Cutting, 3/8 in Arbor
L055-12108
- Continuous and brazed edge lasts longer in tile and stone
- Durable and robust design for greater durability in tough applications
- Durable and robust design for greater durability in tough applications
- Fast and easy cutting with low torque and little pressure
- Oversized slot in hole saw for easy plug removal
Lenox Speed Slot 1772931 Hole Saw, 1-5/8 in Dia, 1-9/16 in D Cutting, 1/4 in Arbor, M2 HSS Cutting E
L055-00266
- Improved metal cutting performance
- Increased wall thickness improves durability and minimizes tooth loss
- Increased wall thickness improves durability and minimizes tooth loss
- Optimized tooth design penetrates metal with ease
- Larger, sharper teeth remove more wood for fast cutting
Makita Impact XPS E-01644 Impact Bit Set, 60-Piece, Steel
M091-55529
- Bits last up to 90X longer than standard impact bits
- Bits feature precision machined tips, pulse torsion rings, an optimized torsion zone and unique steel, combine to deliver improved overall performance and bit life
- Bits feature precision machined tips, pulse torsion rings, an optimized torsion zone and unique steel, combine to deliver improved overall performance and bit life
- Precision machined tips provide a superior full contact fit for improved holding power and longer life, pulse torsion rings help to disperse impact energy through the torsion zone and off of the bit tip
- Precision machined tips provide a superior full contact fit for improved holding power and longer life, pulse torsion rings help to disperse impact energy through the torsion zone and off of the bit tip
Makita Impact XPS E-01650 Impact Bit Set, 45-Piece, Steel
M091-55530
Uniquely calibrated heat treating process for added durability, matte nickel surface for best in class corrosion resistance