Drilling & Milling Bits
Bosch HCK005 Hammer Drill Bit Set, Rotary, 5 -Piece, Carbide
B083-31783
- Optimized brazing and hardening process for long life
- 15% faster compared to S4L
- 15% faster compared to S4L
- Bosch-made carbide tip is tougher and more durable under heavy loads
- Rugged case is reusable
Bosch HS1911 Drill Bit, 1 in Dia, 12 in OAL, SDS Max Shank
D032-24650
- Fits Bosch SDS-max hammers, competitive SDS-max driver hammers and Hilti hammers using TE-Y and TE-FY shanks
- For concrete removal and hard surface break-up
- Used for masonry and concrete demolition
- High quality hardened steel flat chisel
- SDS-Max shank prevents bit slippage during use
Bosch HS1922 Clay Spade Bit, 4-1/2 in Dia, 17 in OAL, SDS Max Shank
B083-24660
- Uniform steel the length of the bit
- Use with a rotary hammer for easy digging
- Use with a rotary hammer for easy digging
Bosch RC2164 Rebar Cutter, 1 in Dia, 12 in OAL, Masonry Bit, 3/8 in Dia Shank, SDS Plus Shank
D032-38740
- Unique flute geometry with steep spiral removes debris fast
- High-quality carbide for long drilling life
- High-quality carbide for long drilling life
- Tapered body design provides less weight for smoother drilling
- Relief hole dissipates heat and allows for slug removal
Bosch Speed-X HC4501 Drill Bit, 3/8 in Dia, 13 in OAL, Hammer Bit, Spiral Flute, 2 -Flute, Spline Sh
B083-28647
- Tungsten carbide tip provides great wear resistance in tough applications
- Patented four-cutter tip design that provides optimal performance
- Patented four-cutter tip design that provides optimal performance
- Large flute volume for fast drilling, dust transport and less clogging
- Active-centering tip for optimum guidance when drilling in concrete and reinforced concrete
CAMO 333900 Power Bit, #15 Drive, Torx Drive, 1/4 in Shank, Hex Shank, 2 in L, HCS
C339-12870
- High strength hardened carbon steel for excellent durability
- High strength hardened carbon steel for excellent durability
CAMO 333930 Power Bit, T40 Drive, Torx Drive, 1/4 in Shank, Hex Shank, 2 in L, Hardened Carbon Steel
C339-28732
- High strength hardened carbon steel for excellent durability
- High strength hardened carbon steel for excellent durability
Cobalt High Speed Steel Fractional Straight Shank Jobber Length Drill Bit,1/8
I008-63108
- Constructed of M-35 5 percent cobalt high speed steel for super abrasive resistance in tough metals
- Heavy duty spiral flute design produces faster chip ejection
- Shorter cutting lips reduce torque for drilling in high tensile strength materials
- 135-degree split point reduces feed pressure for easier penetration without work hardening
Cobalt High Speed Steel Fractional Straight Shank Jobber Length Drill Bit,5/16
I008-63120
- Constructed of M-35 5 percent cobalt high speed steel for super abrasive resistance in tough metals
- Heavy duty spiral flute design produces faster chip ejection
- Shorter cutting lips reduce torque for drilling in high tensile strength materials
- 135-degree split point reduces feed pressure for easier penetration without work hardening
Cobalt High Speed Steel Fractional Straight Shank Jobber Length Drill Bit,7/32
I008-63114
- Constructed of M-35 5 percent cobalt high speed steel for super abrasive resistance in tough metals
- Heavy duty spiral flute design produces faster chip ejection
- Shorter cutting lips reduce torque for drilling in high tensile strength materials
- 135-degree split point reduces feed pressure for easier penetration without work hardening
Crescent APEX u-GUARD CAUGSET-30 Fastening Set, 30-Piece, Steel, Black Oxide
C643-33849
- Non-marring cover protects from scratching or damages
- Free spinning design enhances control and safety
- Free spinning design enhances control and safety
- Optimized tip geometry for excellent fit (50% better grip measured on Phillips bit only)
- Great durability to withstand the toughest jobs
DeWALT DD5111 Impact Drill Bit, 11/64 in Dia, 2-15/16 in OAL, Spiral Flute, 1/4 in Dia Shank, Hex Sh
D075-41965
- Ground from solid one piece design is up to 5 times more durable than the current 2 piece conventional product
- Patented web taper increases the rigidity of the bit to decrease the potential for bit breakage
- Patented web taper increases the rigidity of the bit to decrease the potential for bit breakage
- Patented Pilot Point tip (3/16 - 1/2 in) allows users to drill holes faster than the conventional split point product and offers clean burr free holes with reduced bit walking
DeWALT DW0521 Quick-Connect Chuck, 3/8 in Chuck, Steel, Keyless
A123-53158
- 1/4 in hex quick-connect allows users to easily change from fastening to drilling
- Built with all-metal construction for maximum durability
- Built with all-metal construction for maximum durability
- Single sleeve design allows for single handed tightening
DeWALT DW130V Electric Drill, 120 V, 600 W, 1-1/2 in Auger Bit, 1/2 in Twist Bit, 3 in Hole Saw Bit
D075-49737
- Variable speed reversible switch reduces air bubbles when mixing mud and offers greater control when drilling
- 9 A, 120 V motor provides enough power for any jobsite application
- 9 A, 120 V motor provides enough power for any jobsite application
- Soft-grip handle improves user comfort and control
- 0 to 550 rpm provides increased torque for drilling and mud mixing
DeWALT DW1354 Drill Bit Set, 14 -Piece, HSS, Titanium
D075-11360
- Heavy-duty titanium finish for durability
- 3-flats shank reduces spinning in chuck
- 3-flats shank reduces spinning in chuck
- Pilot point tip helps to eliminate walking
- Tapered web design to resist breakage
DeWALT DW1576 Drill Bit, 5/8 in Dia, 6 in OAL, Spade Bit, 1/4 in Dia Shank, Hex Shank
D075-47561
- Heavy-duty full length heat-treated shank provides maximum durability against bending and breaking
- Cutting spurs provide optimum hole finish
- Cutting spurs provide optimum hole finish
- 1/4 in hex shank prevents slipping and fits all 1/4 in quick-change systems
- Hang hole for easy storage
DeWALT DW1580 Drill Bit, 7/8 in Dia, 6 in OAL, Spade Bit, 1/4 in Dia Shank, Hex Shank
D075-47565
- Heavy-duty full length heat-treated shank provides maximum durability against bending and breaking
- Cutting spurs provide optimum hole finish
- Cutting spurs provide optimum hole finish
- 1/4 in hex shank prevents slipping and fits all 1/4 in quick-change systems
- Hang hole for easy storage
DeWALT DW1583 Drill Bit, 1-1/8 in Dia, 6 in OAL, Spade Bit, 1/4 in Dia Shank, Hex Shank
D075-47568
- Heavy-duty full length heat-treated shank provides maximum durability against bending and breaking
- Cutting spurs provide optimum hole finish
- Cutting spurs provide optimum hole finish
- 1/4 in hex shank prevents slipping and fits all 1/4 in quick-change systems
- Hang hole for easy storage
DeWALT DW1587 Spade Bit Set, Heavy-Duty, 6 -Piece, Carbon Steel
D075-47572
- Heavy-duty shank provides maximum durability
- Hex shank prevents slipping and fits all 1/4 in quick change systems
- Hex shank prevents slipping and fits all 1/4 in quick change systems
- Cutting spurs provide optimum hole finish
- Hang hole allows for bit storage and wire pulling
DeWALT DW1589 Spade Bit Extension, 6 in OAL, 1/4 in Dia Shank, Hex Shank
D075-47574
- Heavy-duty full length heat treat shank provides maximum durability against bending and breaking
- Cutting spurs provide optimum hole finish
- Cutting spurs provide optimum hole finish
- 1/4 in Hex shank prevents slipping and fits all 1/4 in quick-change systems
- Hang hole allows for bit storage and wire pulling
DeWALT DW1592 Drill Bit, 5/8 in Dia, 16 in OAL, Spade Bit, 1/4 in Dia Shank, Hex Shank
D075-47577
- Heavy-duty full length heat-treated shank provides maximum durability against bending and breaking
- Cutting spurs provide optimum hole finish
- Cutting spurs provide optimum hole finish
- 1/4 in hex shank prevents slipping and fits all 1/4 in quick-change systems
- Hang hole for easy storage
DeWALT DW1595 Drill Bit, 1 in Dia, 16 in OAL, Spade Bit, 1/4 in Dia Shank, Hex Shank
D075-47580
- Heavy-duty full length heat-treated shank provides maximum durability against bending and breaking
- Cutting spurs provide optimum hole finish
- Cutting spurs provide optimum hole finish
- 1/4 in hex shank prevents slipping and fits all 1/4 in quick-change systems
- Hang hole for easy storage
DeWALT DW1637 Drill Bit, 2-1/8 in Dia, 6 in OAL, Wood Bit, 7/16 in Dia Shank, Ball Groove, Hex Shank
D075-11637
- Aggressive spur provides fast material penetration
- Optimized cutting geometry provides longer bit life
- Optimized cutting geometry provides longer bit life
- Open tooth design allows for more resharpenings
- 7/16 in ball groove shank allows for quick bit changes