Need More Help? 718-499-1119
Search
Fall Protection Systems & Equipment
Qualcraft 01310-QC Vertical Lifeline, 25 ft L Line
Q010-01310
- Attached self-locking carabiner
- Attached self-locking carabiner
Qualcraft 01320-QC Vertical Lifeline, 50 ft L Line
Q010-01320
- Attached self-locking carabiner
- Attached self-locking carabiner
Qualcraft 01500 Rope Grab With Attached 18 in Extension Lanyard
Q010-01500
- Easy to install and designed to lock automatically when a fall occurs
- Simply squeeze to move positioning device and it will lock automatically
- Simply squeeze to move positioning device and it will lock automatically
- Supremely durable
Qualcraft 01508/01505 Rope Grab Without Extension
Q010-01508
- Easy to install and designed to lock automatically when a fall occurs
- Simply squeeze to move positioning device and it will lock automatically
- Simply squeeze to move positioning device and it will lock automatically
- Supremely durable
Qualcraft 01610 Rebar Positioning Assembly
Q010-01610
- Allow workers to lean away from walls while keeping their hands free
- Must be accompanied by a harness with side positioning rings, such as the Guardian HUV-3
- Must be accompanied by a harness with side positioning rings, such as the Guardian HUV-3
- Positioning device systems are combinations of equipment which are intended to permit the user to use both hands freely while being supported on an elevated vertical surface as in rebar and concrete form work
- Designed to comply the latest, most stringent
Qualcraft 42002 Cable SRL, 30 ft L Line, Snap Harness Hook
Q010-42002
- Compact and lightweight design
- Galvanized cable or web lifeline
- Galvanized cable or web lifeline
- Galvanized cable or web lifeline
Qualcraft Industries 00710 Snappy Anchor, Disposable, Stainless Steel
Q010-00710
- Fits any roof pitch
- Easy to install by nailing into the truss
- Easy to install by nailing into the truss
- Just hammer over the attachment point when the job is done and install roofing substrate over destroyed anchor point
- Fasteners provided
Qualcraft Industries 00711 Snappy Anchor, Disposable, Stainless Steel
Q010-00711
- Fits any roof pitch
- Easy to install by nailing into the truss
- Easy to install by nailing into the truss
- Just hammer over the attachment point when the job is done and install roofing substrate over destroyed anchor point
- Fasteners provided
Qualcraft Industries Ridge-It 00500 Roof Anchor, Single D-Ring, Stainless Steel
Q010-00500
- Meets standards for fall arrest
- Easy installation
- Easy installation
- Comes with a D-ring on one end
- Discreet design
Squids 3000 Retractable Tool Lanyard with Carabiner Anchor, 1 lb Working Capacity, 48", Black, Ships
E005-19300
- Lightweight, low-profile retractable design limits snags, tangles and tripping hazards.
- One lightweight, manual-locking stainless steel carabiner for connecting to a tool.
- A second lightweight, manual-locking stainless steel carabiner for securely connecting to D-rings and anchor points.
- Swivel rings on both ends feature a full 360 rotational range.
- Fixed-length locks with self-setting pawls for easily setting the desired lanyard length.
Squids 3001 Retractable Tool Lanyard w/Choking-Loop Tool Tether+Carabiner Anchor, 2lb Capacity,48",S
E005-19301
- Lightweight, low-profile retractable design limits snags, tangles and tripping hazards.
- Choking-loop tool tether with an energy-absorbing cord and tubular nylon webbing for connecting to a tool.
- One lightweight, manual-locking stainless steel carabiner for securely connecting to D-rings and anchor points.
- Swivel rings on both ends feature a full 360 rotational range.
- Fixed-length locks with self-setting pawls for easily setting the desired lanyard length.
Squids 3002 Retractable Lanyard w/Carabiner+Belt-Loop Anchor, 2 lb Max Work Cap, 6" to 48", Gray, Sh
E005-19302
- Patent-pending, retractable design limits snag hazards, while maintaining a low profile when anchored.
- Easy to use with a smooth-action cord-pull and automatic retraction mechanism.
- High-strength, cut-resistant Dyneema cord to meet the demands of the harshest conditions.
- Fiberglass-reinforced nylon housing with tapered cord exit.
- Aluminum carabiner with double-action, self-locking gate for connecting to a tool.
Squids 3003 Retractable Lanyard with Two Carabiners, 2 lb Max Working Capacity, 8" to 48", Gray, Shi
E005-19303
- Patent-pending, retractable design limits snag hazards, while maintaining a low profile when anchored.
- Easy to use with a smooth-action cord-pull and automatic retraction mechanism.
- High-strength, cut-resistant Dyneema cord to meet the demands of the harshest conditions.
- Fiberglass-reinforced nylon housing with tapered cord exit.
- Two aluminum carabiners with double-action, self-locking gates for connecting to a tool and for connecting to anchor points.
Squids 3010 Retractable Lanyard w/Locking Carabiner+Belt Clip, 5 lb Max Work Capacity, 48", Black, S
E005-19310
- Lightweight, extremely durable tethering solution for mounting to belts and fall-protection harnesses.
- Low-profile retractable design limits snags, tangles and tripping hazards.
- Ultra-strong ABS housing with tapered cord exit.
- Handy trigger switch allows the user to easily lock the cord into a range of fixed lengths and/or quickly release the cord to remove tension or to fully retract it.
- A slot on the back of the housing accommodates belts and fall-protection harness straps up 2 wide and 0.38 thick.
Squids 3100 Lanyard w/Aluminum Carabiner + Cinch-Loop, 10 lb Max Work Capacity, 35" to 45", Lime, Sh
E005-19003
- Shock-absorbing cord with tubular-nylon webbing and lock-stitching at both ends for added security.
- Lightweight, aluminum carabiner with locking screw-gate for easy, secure attachment to either anchor points or tools.
- Captive-eye carabiner-attachment design to better predict the direction of the load, minimizing the potential for the lanyard to slide into the carabiner's gate.
- Cinch-loop end for tethering to captive-hole-attachment-equipped tools and/or to the user's wrist.
- Third-party certified to a 10 lb maximum working capacity with a 2:1 safety factor.
Squids 3100 Lanyard w/Aluminum Carabiner + Cinch-Loop, 10 lb Max Work Capacity, 42" to 54", Black, S
E005-19012
- Shock-absorbing cord with tubular-nylon webbing and lock-stitching at both ends for added security.
- Lightweight, aluminum carabiner with locking screw-gate for easy, secure attachment to either anchor points or tools.
- Captive-eye carabiner-attachment design to better predict the direction of the load, minimizing the potential for the lanyard to slide into the carabiner's gate.
- Cinch-loop end for tethering to captive-hole-attachment-equipped tools and/or to the user's wrist.
- Third-party certified to a 10 lb maximum working capacity with a 2:1 safety factor.
Squids 3100 Lanyard w/Aluminum Carabiner + Cinch-Loop, 10 lb Max Work Capacity, 42" to 54", Lime, Sh
E005-19013
- Shock-absorbing cord with tubular-nylon webbing and lock-stitching at both ends for added security.
- Lightweight, aluminum carabiner with locking screw-gate for easy, secure attachment to either anchor points or tools.
- Captive-eye carabiner-attachment design to better predict the direction of the load, minimizing the potential for the lanyard to slide into the carabiner's gate.
- Cinch-loop end for tethering to captive-hole-attachment-equipped tools and/or to the user's wrist.
- Third-party certified to a 10 lb maximum working capacity with a 2:1 safety factor.
Squids 3100F(x) Tool Lanyard w/Aluminum Carabiner+Loop, 10 lb Max Work Cap, 38" to 48",Orange/Gray,S
E005-19802
- Patented, shock-absorbing design to reduce the dynamic forces associated with accidental drops.
- Durable 1680 denier polyester, elastic-blend webbing for secure, reliable, lighter-weight performance.
- Lower-profile, lighter-weight format to further reduce snag-hazard potential and increase working ease.
- Anodized, aluminum-alloy carabiner with captive-eye attachment point for easy anchoring with minimal lanyard tangles.
- Treaded loop with a secure-grip material design for securely attaching to larger tools or anchoring to a structure.
Squids 3101 Lanyard w/Stainless Steel Carabiner+Cinch-Loop, 15 lb Max Work Cap, 42" to 54", Lime, Sh
E005-19017
- Energy-absorbing cord with tubular-nylon webbing and lock-stitching at both ends for added security.
- Reflective accents along the cord's length to improve visibility in low-light conditions.
- Manual-locking, stainless steel carabiner for easy, secure attachment to either anchor points or tools.
- Captive-eye carabiner-attachment design to better predict the direction of the load, minimizing the potential for the lanyard to slide into the carabiner's gate.
- Cinch-loop end for tethering to captive-hole-attachment-equipped tools and/or to the user's wrist.
Squids 3102F(x) Tool Lanyard w/Aluminum Carabiner+Cinch-Loop, 5 lb Max Work Cap, 38" to 48", OR/GY,S
E005-19864
- Patented, shock-absorbing design to reduce the dynamic forces associated with accidental drops.
- Durable 1680 denier polyester, elastic-blend webbing for secure, reliable, lighter-weight performance.
- Lower-profile, lighter-weight format to further reduce snag-hazard potential and increase working ease.
- Anodized, aluminum-alloy carabiner with captive-eye attachment point for easy anchoring with minimal lanyard tangles.
- Detachable cinch-loop with modular connecting buckle for easy tool exchanges.
Payment options
