Freud branded products | Plastic Express Inc.

Freud 40-114 Router Bit, 1-5/8 in Dia Cutter, 2-9/16 in OAL, 1/2 in Dia Shank, 2 -Cutter, Carbide

F055-38096

Chamfer size easily adjusts by changing the height of the bit
Cuts all composition materials, plywoods, hardwoods and softwoods
Cuts all composition materials, plywoods, hardwoods and softwoods

+ -

Freud 41-104 Router Bit, 19/32 in Dia Cutter, 1-7/8 in OAL, 1/4 in Dia Shank, 2-Cutter, Carbide

F055-38393

The 66-100 solid carbide bit creates a 7 deg bevel and includes a self-piloting feature that eliminates the expense and upkeep of a ball bearing assembly
Cuts all plastic laminates
Cuts all plastic laminates
For beveled edge on plastic laminates

+ -

Freud 42-100 Bearing Flush Trim Bit, 3/8 in Dia Cutter, 1 in L Cutting, 2-13/16 in OAL, 1/4 in Dia S

F055-01462

Use on hand-held and table-mounted routers
Freud Perma-SHIELD coating
Freud Perma-SHIELD coating
Freud Perma-SHIELD coating

+ -

Freud 42-104 Router Bit, 1/2 in Dia Cutter, 2-13/16 in OAL, 1/4 in Dia Shank, 2-Cutter, Carbide

F055-01463

Cuts all composition materials, plywoods, hardwoods and softwoods
For trimming laminate counter tops and doing pattern work
For trimming laminate counter tops and doing pattern work
Two flutes provide faster cutting and three flutes yield a superior finish
Cuts all composite materials, plywoods, hardwoods and softwoods

+ -

Freud 42-106 Flush Trim Bit, 1/2 in Dia Cutter, 2-1/8 in OAL, 1/4 in Dia Shank, 2-Cutter, Carbide

F055-01464

Cuts all composition materials, plywoods, hardwoods and softwoods
Use on hand held or table mounted routers
Use on hand held or table mounted routers
Freud Perma-SHIELD coating
Trimming laminates and routing along patterns

+ -

Freud 42-110 Router Bit, 1/2 in Dia Cutter, 3-1/4 in OAL, 1/2 in Dia Shank, 2-Cutter, Carbide

F055-01506

Cuts all composition materials, plywoods, hardwoods and softwoods
For trimming laminate counter tops and doing pattern work
For trimming laminate counter tops and doing pattern work
Two flutes provide faster cutting and three flutes yield a superior finish
Use on portable or table-mounted routers

+ -

Freud 42-116 Router Bit, 1/2 in Dia Cutter, 4-3/8 in OAL, 1/2 in Dia Shank, 2-Cutter, Carbide

F055-38103

Cuts all composition materials, plywoods, hardwoods and softwoods
For trimming laminate counter tops and doing pattern work
For trimming laminate counter tops and doing pattern work

+ -

Freud 42-204 Router Bit, 3/4 in Dia Cutter, 4-1/8 in OAL, 1/2 in Dia Shank, 2-Cutter, Carbide

F055-01941

Cuts all composition materials, plywoods, hardwoods and softwoods
The 3/4 in Dia body and full 1 in or 2 in cutting length provide the stability and cutting capacity for thick stock or for routing multiple parts with a template
The 3/4 in Dia body and full 1 in or 2 in cutting length provide the stability and cutting capacity for thick stock or for routing multiple parts with a template
The shear action also delivers easier, smooth cuts in thick materials
For trimming laminate counter tops and doing pattern work

+ -

Freud 44-100 Router Bit, 2-13/16 in OAL, 1/4 in Dia Shank, Carbide

F055-01564

These are the bits to rely on for a smooth, burn-free cut
Two flutes provide faster cutting and three flutes yield a great finish
Cuts all composition materials, plywoods, hardwoods and softwoods
For trimming laminates and pattern work
Use on portable or table-mounted routers

+ -

Freud 50-102 Flush Trim Bit, 1/2 in Dia Cutter, 1 in L Cutting, 2-5/8 in OAL, 1/4 in Dia Shank, 2-Cu

F055-01467

Use on hand-held and table-mounted routers
Freud Perma-SHIELD coating
Freud Perma-SHIELD coating
For template and pattern routing

+ -

Freud 50-104 Router Bit, 2-5/8 in OAL, 1/4 in Dia Shank, Carbide

F055-38422

Cuts all composition materials, plywoods, hardwoods and softwoods
For template work and sign lettering
For template work and sign lettering

+ -

Freud 50-106 Router Bit, 2-5/8 in OAL, 1/4 in Dia Shank, Carbide

F055-38423

Cuts all composition materials, plywoods, hardwoods and softwoods
Cuts all composition materials, plywoods, hardwoods and softwoods

+ -

Freud 50-501 Router Bit, 3-5/16 in OAL, 1/4 in Dia Shank, Carbide

F055-03792

Double bearing design allows you to choose the cutting direction that best suits your workpiece
Freud's top and bottom bearing bits let you rout half the curve in one direction, flip the work piece over and rout the other half in the opposite direction without repositioning your pattern
Freud's top and bottom bearing bits let you rout half the curve in one direction, flip the work piece over and rout the other half in the opposite direction without repositioning your pattern
Ideal for templates placed above or below the work piece or to trim laminates or veneer perfectly flush with countertops, shelving and other projects
Cuts all hardwoods, softwoods, plastic laminates and veneered plywood

+ -

Freud 50-509 Trim Bit, 3-7/8 in OAL, 1/2 in Dia Shank, Carbide

F055-03791

Double bearing design allows you to choose the cutting direction that best suits your workpiece
Freud's top and bottom bearing bits let you rout half the curve in one direction, flip the work piece over and rout the other half in the opposite direction without repositioning your pattern
Freud's top and bottom bearing bits let you rout half the curve in one direction, flip the work piece over and rout the other half in the opposite direction without repositioning your pattern
Ideal for templates placed above or below the work piece or to trim laminates or veneer perfectly flush with countertops, shelving and other projects
Cuts all hardwoods, softwoods, plastic laminates and veneered plywood

+ -

Freud 56-108 Slotting Cutter, Carbide

F055-38111

Should be used with Freud's slotting cutter arbors 60-100 for 1/4 in shanks and 60-102 for 1/2 in shanks
Compatible with 62-108 bearing
Compatible with 62-108 bearing
Cutter 56-109 can be used for biscuit joining
Cuts all composition materials, plywoods, hardwoods and softwoods

+ -

Freud 56-112 Slotting Cutter, Carbide

F055-01541

Should be used with Freud's slotting cutter arbors 60-100 for 1/4 in shanks and 60-102 for 1/2 in shanks
Compatible with 62-108 bearing
Cutter 56-109 can be used for biscuit joining
Cuts all composition materials, plywoods, hardwoods and softwoods
Bodies are heat treated for strength and computer balanced for vibration-free operation

+ -

Freud 60-100 Slotting Cutter Arbor, 25/64 in OAL, 1/4 in Dia Shank, Carbide

F055-01512

Cuts all composition materials, plywoods, hardwoods and softwoods
For producing smooth, precise, accurate slots
Produces smooth, precise, accurate slots
Compatible with any 56 series three wing slotting cutter or any 58 series four wing slotting cutter
Includes superior quality Freud ball bearings

+ -

Freud 64-100 Router Bit, 1-1/2 in OAL, 1/4 in Dia Shank, Carbide

F055-01488

Solid micrograin carbide extends the cutting life and the self-piloting feature eliminates the expense and upkeep of a ball bearing assembly
Cuts all plastic laminates
Cuts all plastic laminates
For cutting plastic laminate quickly and cleanly
Use on portable routers and laminate trimmers for trimming plastic laminate

+ -

Freud 70-104 Router Bit, 1-5/8 in OAL, 1/4 in Dia Shank, Carbide

F055-01471

The large diameter end bores holes to allow nail or screw heads to enter the slot and the smaller diameter allows room for the shank of the nail or screw
Cuts all composition materials, plywoods, hardwoods and softwoods
Cuts all composition materials, plywoods, hardwoods and softwoods
Features chip breakers to reduce burning
For creates key holes for hanging plaques and sleeves

+ -

Freud 75-106 Router Bit, 3 in OAL, 1/2 in Dia Shank, Carbide

F055-39004

Freud's solid carbide up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits
Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods
Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods
For production settings
For cutting mortises and routing deep blind holes

+ -

Freud

Payment options