GREENLEE TEXTRON
GREENLEE TEXTRON branded products
12 FOOT FISH STIX
G077-10504
- Highly visible green color rods can be easily threaded together and seen when working above ceilings, down walls, or under raised floors
- 1/4-in diameter fiberglass adds rigidity when connecting multiple sections
- Two different threaded tips accommodate various bundles of wire or cable.
Drill/Tap Bit, #6 Size, 32 TPI, 1/4 in Shank
G077-17611
- Back tapered beyond tap to prevent thread damage from over-drilling
- Complete hole drilling, tapping and deburring/countersinking in one operation
Drill/Tap Sets, 1/4 in Hex, Steel
G077-17620
- Complete hole drilling and taping in one operation
- Deburr/Countersink also provided on bit beyond the back taper
- Drill point - split point with web thinning
Greenlee 0952-01 Cable Cutter, 14/2 to 10/4 AWG, 3/8 in Cutting Capacity, 10-5/8 in OAL, Molded Hand
G077-02072
For AC And MC cable up to 1 in
Greenlee CM-660 Clamp Meter, 6000 Count Resolution, LCD Display
G077-02211
AmpTip increases accuracy on small wires and low current
Greenlee DTAP1/4-20 Drill/Tap, Steel
G077-17616
High-quality hex shank to ensure strong connection to drill chuck
Greenlee DTAP10-24 Drill/Tap, Steel
G077-17613
- Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel vs carbon steel for longer life
Greenlee DTAP10-32 Drill/Tap, Steel
G077-17614
- Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel vs carbon steel for longer life
Greenlee DTAP12-24 Drill/Tap, Steel
G077-17615
- Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel vs carbon steel for longer life
NE BIT 7/8(22.2)
G077-30927
- Cuts through nails
- Self-feeding screw point draws bit through wood
- Unique design cutting angle - smoother starts, reduced cutting loads
- 1
- 2