HITACHI branded products | Plastic Express Inc.

BLADE CIRC SAW 7-1/4IN 4T

H058-00843

IN STOCK NOW : 17

Ships in 2-3 DAYS : 0

Compatible with benchtop/stationary and handheld circular saws
Compatible with benchtop/stationary and handheld circular saws

HITACHI 728982 Fuel Cell, For: NR90GC and NR90GR Gas Powered Nailer

H058-01521

IN STOCK NOW : 3

Ships in 2-3 DAYS : 0

2 pack of fuel rods keeps you running longer with less downtime
Each cell shoots up to 1200 nails for increased productivity
Each cell shoots up to 1200 nails for increased productivity

HITACHI C10FSHPS Miter Saw with Laser Marker, 10 in Dia Blade, 1-Speed

H058-02768

IN STOCK NOW : 4

Ships in 2-3 DAYS : 10

Unique and adjustable laser marker for precise cutting lines easily adjustable to users preference
12 A motor, intense power for rigorous cutting jobs
12 A motor, intense power for rigorous cutting jobs
57 deg miter angle to the right for flexibility with 46 deg miter angle to the left
45 bevel angle range to the right and left allowing users to quickly and easily flip the saw blade and leave the material in place

HITACHI C12FDH Miter Saw with Laser Marker, 12 in Dia Blade, 4000 rpm Speed, 52 deg Max Miter Angle

H058-02307

IN STOCK NOW : 0

Ships in 2-3 DAYS : 0

Exclusive laser marker system accurately indicates where the blade will cut on the material and can be easily adjusted to the right or left of the cut mark depending upon the users preference
Powerful 15 A motor with 1950 W of output power smoothly powers through hardwoods with ease
Powerful 15 A motor with 1950 W of output power smoothly powers through hardwoods with ease
Tall, pivoting aluminum fence that stands at a height of 5-1/8 in allows crown molding to be cut vertically for convenience
Elastomer compound coats the horizontal handle, reducing vibration, while adding comfort and preventing slippage

HITACHI C7SB2 Circular Saw, 15 A, 7-1/4 in Dia Blade, 1-27/32 in at 45 deg, 2-3/8 in at 90 deg D Cut

M155-02321

IN STOCK NOW : 1

Ships in 2-3 DAYS : 37

Magnesium alloy for gear cover, blade cover and lower guard
Heavy-duty aluminum base with scale
Heavy-duty aluminum base with scale

HITACHI DH38YE2 Rotary Hammer, 120 V, 950 W, 1-1/2 in Chuck, Keyless Chuck, Black/Green/Silver

H058-02242

IN STOCK NOW : 0

Ships in 2-3 DAYS : 0

For spline bit shank
Two-mode action, rotation and hammering mode, hammering only mode
Two-mode action, rotation and hammering mode, hammering only mode
Compact in comparison with 1-1/2 in rotary hammers

HITACHI EC2510E Gas-Powered Wheeled Air Compressor, 8 gal Tank, Iron

H058-02469

IN STOCK NOW : 5

Ships in 2-3 DAYS : 40

Powered by a professional-grade Honda GX engine
Solid cast iron cylinder provides industry recognized premium material for long life, consistent compression and low oil carryover
Solid cast iron cylinder provides industry recognized premium material for long life, consistent compression and low oil carryover
Baseplate integrated control panel protects the gauge, regulator and plumbing while centralizing the controls for simple operation
Oversized oil level site glass allows everyone to monitor the oil level for the pump avoiding pump damage due to lock up from inadequate oil supply

HITACHI N3804AB3 Stapler, 1/4 in Air Inlet, 125 Magazine, Narrow Crown Staple, 1/4 in W Crown, Alumi

H058-01127

IN STOCK NOW : 86

Ships in 2-3 DAYS : 330

2.2 lb lightweight and compact for easy use in tight spaces
New selective actuation switch lets the user easily select bump fire or sequential fire modes
New selective actuation switch lets the user easily select bump fire or sequential fire modes
360 deg adjustable exhaust, can be directed away from user in any direction
High-capacity magazine, holds up to 125 staples for maximum efficiency

HITACHI N5008AC2 Construction Stapler, 3/8 in Air Inlet, 150 Magazine, Standard Crown Staple, 7/16 i

H126-01360

IN STOCK NOW : 6

Ships in 2-3 DAYS : 251

4.4 lb lightweight and well balanced for easy maneuverability
Exhaust muffler reduces noise pollution
Exhaust muffler reduces noise pollution
High capacity magazine holds 150 staples allowing for fewer replenishments
Open magazine design allows users to quickly check staple quantity

HITACHI NP35A Pin Nailer, 100 Magazine, 90 deg Collation, Strip Collation, 23 ga Dia x 5/8 to 1-3/8

M155-01558

IN STOCK NOW : 8

Ships in 2-3 DAYS : 41

Large fastener capacity for fewer reloads and less downtime
Magazine automatically adjusts to 5/8, 3/4, 1, 1-3/16 and 1-3/8 in fastener lengths for use on a wide variety of projects
Magazine automatically adjusts to 5/8, 3/4, 1, 1-3/16 and 1-3/8 in fastener lengths for use on a wide variety of projects
Dual trigger for safe and accurate placement of fasteners
Rear exhaust directs oil and debris away from the work surface

HITACHI NT65M2S Finish Nailer with Integrated Air Duster, 1/4 in Air Inlet, 100 Magazine, Nail Faste

H058-01042

IN STOCK NOW : 126

Ships in 2-3 DAYS : 160

Integrated air duster button allows air from the compressor to bypass the nailing function and expel from a hole in the front of the tool allowing the user to clear away dust and debris from the work surface
Toolless and easy-to-clear nose for quick and simple staple extraction
Toolless and easy-to-clear nose for quick and simple staple extraction
Simple flip of the selective actuation switch allows for either sequential or contact fastening, depending upon the application, with no additional parts or tools required
Toolless depth of drive dial adjusts for flush fastening into varying material for improved control and a professional finish

HITACHI NV90AGS Framing Nailer, 200 to 300 Magazine, 16 deg Collation, Wire Collation, 0.09 scfm Air

M155-02429

IN STOCK NOW : 0

Ships in 2-3 DAYS : 0

New head guard design allows for quicker disassembly during tool maintenance
Lightweight at 7.7 lb and well-balanced for ease of maneuverability and less user fatigue
Lightweight at 7.7 lb and well-balanced for ease of maneuverability and less user fatigue
Selective actuation switch allows for quick transitions between sequential and contact nailing with the simple flip of a switch
Accepts 1-3/4 in up to 3-1/2 in wire collated coil framing nails

Metabo HPT NR90ADS1M Framing Nailer, 86 to 94 Magazine, Paper Collation, 0.113 to 0.148 in Dia x 2 t

H058-01954

IN STOCK NOW : 8

Ships in 2-3 DAYS : 17

New head guard design allows for quicker disassembly during tool maintenance
Lightweight at 7 lb and well-balanced for ease of maneuverability and less user fatigue
Lightweight at 7 lb and well-balanced for ease of maneuverability and less user fatigue
Selective actuation switch allows for quick transitions between sequential and contact nailing with the simple flip of a switch
Toolless depth adjustment dial allows the user to countersink or flush drive nails into a variety of materials without having to adjust the pressure at the compressor

NAILER BRAD 18GAUGE 2INCH

H126-02406

IN STOCK NOW : 215

Ships in 2-3 DAYS : 165

Selective actuation allows the user to select bump fire or contact fire modes with the simple flip of a switch
At only 2.2 lb, this finish nailer is lightweight and well-balanced making it easy to use all day long
At only 2.2 lb, this finish nailer is lightweight and well-balanced making it easy to use all day long
Elastomer grip adds comfort and prevents slippage
Visual nail reload indicator, located on the magazine, alerts the user when nail quantities are low so that blank drives are avoided

HITACHI

Payment options