Need More Help? 718-499-1119
Search
Home & Kitchen Appliances
SELKIRK 206488 Trim Plate Spacer, Steel, Black, Matte
S181-99991
- For trimming the ceiling, closing off the airspace around the pipe when the chimney is supported from above and extended down into room, conjunction with firestop/joist shield
SELKIRK 206520 Wall Band, Steel
S181-13096
- The Wall Band is used along the wall to provide for 2 in clearance and assure stability
- Required at 8 ft or closer intervals to stabilize the chimney, wherever it is supported along a vertical wall
- Required at 8 ft or closer intervals to stabilize the chimney, wherever it is supported along a vertical wall
- For suspending offsets
SELKIRK 208400 Anchor Plate, Stainless Steel
S181-13170
- The Anchor Plate provides a secure attachment for the chimney to smoke chamber outlet on masonry fireplaces, while reducing footing loads and speeding construction
- Heavy gauge steel construction for long life
- Heavy gauge steel construction for long life
- Retains chimney with a twist-lock connection
SELKIRK 208440 Roof Brace Kit, Stainless Steel
S181-13177
- The roof brace kit should be used at a midpoint on the chimney
- Braces adjust from 4 to 6 ft
- Braces adjust from 4 to 6 ft
SELKIRK 208480 Round Finishing Collar, Black, Matte
S181-13183
- For attaching T-DSA smoke pipe adapter to lower end of chimney or to insulated tee
SELKIRK 208810 Storm Collar, For: Round Chimney Pipe
S181-13199
- The storm collar is designed to fit on the round chimney pipe just above the roof flashing
- The upper edge of the storm collar should be waterproofed with silicone sealer to prevent any water from leaking between the storm collar and chimney pipe
- The upper edge of the storm collar should be waterproofed with silicone sealer to prevent any water from leaking between the storm collar and chimney pipe
- Part is tightened with adjusting screws or tabs after proper positioning
SELKIRK 243520 Wall Bracket, Galvanized
S181-16635
- Maintains clearance to combustibles
- Maintains clearance to combustibles
SELKIRK 243805 Horizontal Termination Pipe Cap, 3 in ID x 8 in OD Dia, Galvanized
S181-16637
- Vent termination for horizontal (thru-the-wall) installations
- Vent termination for horizontal (thru-the-wall) installations
SELKIRK 283870 Pellet Stove Kit, Thru-The-Wall, Stainless Steel
S181-76106
- For pellet and corn appliances
SELKIRK 3VP-12 Vent Pipe, 3 in OD, 12 in L, Stainless Steel, Galvanized
S181-16614
- Efficient and cost-effective venting system
- Full line of fittings and full range of pipe lengths increase installation flexibility
- Full line of fittings and full range of pipe lengths increase installation flexibility
- Proven coupling joint connects in seconds to assure joint integrity
- Gasketed joint design
Payment options
