Need More Help? 718-499-1119
Search
Hooks & Eyes
Campbell T9501824 Clevis Grab Hook, 1/2 in, 9200 lb Working Load, 43 Grade, Steel, Zinc
C102-22066
- Grab hooks are designed to grab a chain link and hold it in place
- Hooks are sized by the material diameter of the chain that they engage
- Make sure the hook size and chain diameter are compatible before attaching to load
- Do not exceed the working load limit
Campbell T9503415 Clevis Grab Hook, 5/16 in, 4700 lb Working Load, 70 Grade, Steel, Yellow Chrome
C102-20197
- Grab hooks are designed to grab a chain link and hold it in place
- Hooks are sized by the material diameter of the chain that they engage
- Hooks are sized by the material diameter of the chain that they engage
- Make sure the hook size and chain diameter are compatible before attaching to load
- Do not exceed the working load limit
Campbell T9700524 Clevis Slip Hook with Latch, 5/16 in, 3900 lb Working Load, 43 Grade, Steel, Zinc
C102-19209
- Slip hooks are designed to allow chain to slip through the hook
- Hooks are sized by the material diameter of the chain that they engage
- Hooks are sized by the material diameter of the chain that they engage
- Hooks are sized by the material diameter of the chain that they engage
Designer Hooks, Plastic, White, 5 lb Cap, 16 Hooks and 24 Strips/Pack
C007-92871
- Hold strongly, remove cleanly.
- Adhesive will stick to many surfaces, including paint, wood, tile and more.
- Adhesive leaves no holes, marks, sticky residue or stains.
GENERAL 1267 Screw Snap Fastener Kit, Nickel
G005-41108
- 2-Piece setting tool with knurled body
- 2-Piece setting tool with knurled body
GENERAL 71264 Utility Grommet Kit, Brass, Black Oxide
G005-22343
- Setting tool has knurled body for greater comfort and safety
- Setting tool and anvil are coded with lines for each individual size grommet
- Setting tool and anvil are coded with lines for each individual size grommet
GENERAL 81264 Grommet Tool Kit
G005-02190
- Contains grommets with hole cutter and hardwood backer block, hardened mandrel and anvil
- Setting tool has knurled body for greater comfort and safety
- Setting tool has knurled body for greater comfort and safety
- Setting tool and anvil are coded with lines for each individual size grommet
General Purpose Hooks, Variety Pack, Assorted Sizes, 54 Pieces/Pack
C007-92963
- An assortment of Command Products contained in a reclosable kit for easy storage and organization.
- Always have the products you need to quickly and easily hang your dcor!
- Best of all, when you are ready to take down or redecorate, they come off cleanly - no nail holes or sticky residue.
HILLMAN 50138 Utility Wire, 100 ft L, 28 Gauge, Galvanized Steel
H051-50138
- For hobbies, fixing up fences and hanging heavy equipment
HILLMAN 50141 Utility Wire, 100 ft L, 12 Gauge, Galvanized Steel
H051-50141
- For hobbies, fixing up fences and hanging heavy equipment
Jackson Wire 16016344 Tie Wire, 9 ga Wire, 170 ft L, Steel, Annealed
J006-24029
- Forms an extra tight seal
- Adheres to damp surfaces
- Adheres to damp surfaces
- Water-resistant seal
- Stays flexible
Jackson Wire 16026344 Tie Wire, 12.5 ga Wire, 170 ft L, Steel, Annealed
J006-26004
- For tying rods or pipe products
- Sanded acrylic formula that fills and seals cracks in blacktop surfaces
- Sanded acrylic formula that fills and seals cracks in blacktop surfaces
- Color and texture blends with the surrounding blacktop
- Weather-resistant formula remains flexible and adheres to both asphalt and concrete
Koch 003292/695911 Aircraft Cable, 3/8 in Dia, 250 ft L, 2880 lb Working Load, Galvanized
K058-11560
- Cable constructed of 7 outer strands of 19 wires per strand
- Good strength
- Good strength
- Good flexibility
- Medium abrasion resistance
Maasdam A-0 Rope Puller, 0.75 ton Lifting, 1500 lb Pull Force, 8 in Mini Between Hooks, 1/2 in Dia R
M164-00001
- Manufactured to the same exacting standards as our cable pullers
- Uses highway approved, 1/2 in Dia wear-resistant Dacron polyester rope twisted or braided
- Uses highway approved, 1/2 in Dia wear-resistant Dacron polyester rope twisted or braided
- Can accommodate an unlimited length of rope
- For recovering vehicles and securing material to trucks
Maasdam A-20 Rope Puller, 0.75 ton Lifting, 1500 lb Pull Force, 8 in Mini Between Hooks, 1/2 in Dia
M164-00020
- Manufactured to the same exacting standards as our cable pullers
- Uses highway approved, 1/2 in Dia wear-resistant Dacron polyester rope twisted or braided
- Uses highway approved, 1/2 in Dia wear-resistant Dacron polyester rope twisted or braided
- Can accommodate an unlimited length of rope
- For recovering vehicles and securing material to trucks
National Hardware 2016BC Series N220-442 Screw Eye, #0, 1-1/4 in L Thread, 2.88 in OAL, Stainless St
N042-19106
- Easy installation
- Sharp screw point bites into wood easily and quickly
- Sharp screw point bites into wood easily and quickly
- Non-magnetic
- For interior and exterior applications
National Hardware 2016BC Series N220-467 Screw Eye, #4, 0.94 in L Thread, 2.19 in OAL, Stainless Ste
N042-19108
- Easy installation
- Sharp screw point bites into wood easily and quickly
- Sharp screw point bites into wood easily and quickly
- Non-magnetic
- For interior and exterior applications
National Hardware 2156BC Series N220-863 Screw Hook, 1/4 in Opening, 4-1/4 in L, Steel, Zinc
N042-12299
- Designed for hanging planters, signs, clotheslines and more
- Medium-weight to heavy-weight
- Medium-weight to heavy-weight
- For interior and exterior applications
National Hardware 2156BC Series N220-897 Screw Hook, 3/8 in Opening, 8 in L, Steel, Zinc
N042-17420
- Designed for hanging planters, signs, clotheslines and more
- Medium-weight to heavy-weight
- Medium-weight to heavy-weight
- For interior and exterior applications
National Hardware 2162BC Series N221-697 Hook Bolt, 3/8 in Thread, 7 in L, Steel, Zinc, 135 lb Worki
N042-12408
- Standard machine screw threads
- Designed for home and industrial applications
- Designed for home and industrial applications
- For interior and exterior applications
Payment options
