Need More Help? 718-499-1119
Search
Ingersoll Rand
Ingersoll Rand branded products
1/2 in Air Impactool Wrench, Square Drive, 25 ft-lb to 350 ft-lb
I017-01539
- Easy-to-service two-piece construction
- Pressure-feed lubrication
- Contoured handle for comfort and control
- Patented one-hand forward/reverse for easy operation
1/2" AIR IMPACT WRENCH
I017-01736
- Exclusive twin hammer impact mechanism delivers a balanced blow
- Variable speed trigger gives you the control to adjust the tools speed for any kind of project you are working on
- Variable speed trigger gives you the control to adjust the tools speed for any kind of project you are working on
- Ergonomic grip reduces vibration and increases comfort while operating, keeping you on the job longer and finishing tasks quickly
- Powerful 6-vane motor is durable and tough enough to complete the task at hand
2925 Series Impact Wrench, 3/4 in, 300 ftlb to 950 ftlb, Through Hole Retainer, Pistol Grip
I017-01809
- Titanium hammer case and a special corrosion preventative treatment, this series is rust and corrosion resistant
- The 2925 Series twin hammer impact mechanism means it's less sensitive to air pressure fluctuation
- This tool features both standard trigger and inside trigger actuation, allowing you to choose whichever works best for the task at hand
- Easy-to-service
300 Series Right Angle Die Grinder, 1/4 in/6 mm Collet Size, 21000 rpm, 0.25 hp
I017-10610
- Ergonomic and lightweight
- Great for porting, weld breaking/grinding, smoothing edges, de-burring, and polishing
- Self-locking throttle lever prevents accidental starting of motor
- Precision-machined steel gears
- Front exhaust helps keep work surface clean
300 Series Straight Die Grinder, 0.33 hp, 1/4 in NPT(F) and 6 mm Output, 25,000 RPM
I017-10613
- Durable and ergonomic
- Great for porting, weld breaking/grinding, smoothing edges, de-burring, and polishing
- Self-locking throttle lever
- Positive grip collet chuck
- Built-in lubricating wick increases angle gear life
300 Series Straight Die Grinder, 1/4 in/6 mm Collet Size, 28000 rpm, 0.25 hp
I017-10311
- Durable and ergonomic
- Great for porting, weld breaking/grinding, smoothing edges, de-burring, and polishing
- Safety lever prevents accidental starts
- Front exhaust helps keep work surface clean
- Versatile and reliable
Air Needle Scaler Replacement Needles, 1/8 in Dia
I017-81395
- Designed for use with needle scalers, this needle set can help to remove rust, paint, dirt, and weld on metal surfaces
- The metal rods pulsate and vibrate during use to loosen excess material, even in tight spaces, corners, and on curved surfaces
Air Percussive Scaler, 4,600 BPM, 1-1/8 in Stroke L
I017-15293
- Great for cleaning and removing paint, rust, dirt, or weld slag
- Needle spring has been reengineered to provide a significant increase in durability
- Can be used with chisel attachments
G-Series Angle Die Grinder, 0.4 hp, 1/4 in NPT(F) Output, 20,000 rpm
I017-A200RG
- Internal contamination-free air controller helps maintain tool speed to maximize material removal rate
- One-nut access for all motor servicing
- Ideal for industrial-duty material removal with burs, grinding wheels and coated abrasives
- Vibration reduced handle, decrease vibration by over 70%, allowing end user extended operation
Ingersoll Rand 1077XPA Air Ratchet Wrench, 1/2 in Drive, Square Drive, 10 to 45 ft-lb, 4 cfm Air
I017-00963
- The 360 deg exhaust capabilities of the 107XPA and 1077XPA standard ratchet wrenches direct exhaust away from the operator, ensuring a better workspace
- The power regulator you'll find on these two ratchet wrenches provides increased control on every job
- The power regulator you'll find on these two ratchet wrenches provides increased control on every job
- With greater access and reach, you can more easily work in deep and hard-to-reach areas
- With Ingersoll Rand products, you can expect your tools to continuously exceed expectations
Ingersoll Rand 2100G Composite Air Impact Wrench, 1/2 in Drive, 550 ft-lb, 9500 rpm Speed
I017-01755
- Exclusive twin hammer impact mechanism delivers a balanced blow
- Composite housing and powerful 6 vane motor ensures durability for your toughest tasks
- Composite housing and powerful 6 vane motor ensures durability for your toughest tasks
- Variable speed trigger gives you the control to adjust the tools speed for any kind of project you are working on
- Handle exhaust blows air away from your project, eliminating the mess and increasing your productivity
Ingersoll Rand 2145QIMAX Air Impact Wrench, 3/4 in Drive, 1350 ft-lb, 7000 rpm Speed
I017-09340
- Compact enough to access tight spaces
- Built to last and designed to withstand tough use in rugged environments
- Built to last and designed to withstand tough use in rugged environments
- An air motor that is 16% more efficient than its predecessor and an easy to clean inlet screen means less downtime, better tool performance and less money spent on compressed air
- Easier access to grease fitting, for quicker maintenance and less downtime
Ingersoll Rand 2235TIMAX Air Impact Wrench, 1/2 in Drive, 930 ft-lb, 8500 rpm Speed
I017-11996
- The high torque output of the powerful vane motor is optimized to increase safety and control over the tool
- Drop it as many times as you want, this impact wrench can take a beating under even the harshest of work environments
- Drop it as many times as you want, this impact wrench can take a beating under even the harshest of work environments
- Finely tuned impact mechanism and motor deliver more torque, durability and efficiency
- A lightweight, balanced, air impact wrench
Ingersoll Rand 231C Air Impact Wrench, 1/2 in Drive, 600 ft-lb, 8000 rpm Speed
I017-04778
- Every time you pull the trigger, the 231C will deliver the same high-quality output time
- Built to withstand harsh environments and repeated drops, this impact wrench won't let you down
- Built to withstand harsh environments and repeated drops, this impact wrench won't let you down
Ingersoll Rand 3445MAX Angle Grinder, 4-1/2 in Dia Wheel, 12,000 rpm Speed, 41 cfm Air, 0.88 hp
I017-01553
- 0.88 hp and 12,000 rpm motor delivers the power you need to grind through the toughest jobs
- Internal governor maximizes speed under load, thus increasing your rate of material removal
- Internal governor maximizes speed under load, thus increasing your rate of material removal
- Lower weight (less than 3.5 lb) and enhanced grip design enables extended usage without fatigue
- Built-in lubricating wick optimizes the life of the angle gear set by improving lubrication to the bevel and pinion gear set
Ingersoll Rand EC112 Air Drill, 1/2 in Chuck, Keyless Chuck, 1/2 hp, 27 cfm Air
I017-11582
- Ergonomic grip and quiet operation with a side handle for better control
- Industrial-grade keyless chuck for extended life and easy bit change out
- Industrial-grade keyless chuck for extended life and easy bit change out
- For home improvement projects, body work installation and repair, farm implement assembly
Ingersoll Rand Edge Series 114GQC Air Hammer, 3500 bpm BPM, 4 cfm Air
I017-02012
- Longer life alloyed steel barrel and heat-treated piston
- Diffused handle exhaust
- Diffused handle exhaust
- Ergonomic, pistol grip handle
Ingersoll Rand Edge Series 3107G Die Grinder, 27,000 rpm Speed, 18 cfm Air, 0.33 hp
I017-02013
- long life ball bearing construction
- Self-locking lever throttle
- Self-locking lever throttle
- Rear exhaust
- Ergonomic grip ensures comfort
Ingersoll Rand Edge Series EB2125X Air Impact Wrench, 1/2 in Drive, 579 ft-lb, 8900 rpm Speed
I017-11580
- Comfortable and easy-to-use
- One-hand forward/reverse switch
- One-hand forward/reverse switch
- Feather touch trigger for better control
- Feather touch trigger for better control
- 1
- 2
Payment options
