Makita
Makita branded products
DRILL ELEC KEYED VSR 1/2IN 7A
M091-03645
- Powerful 7 A motor for improved performance
- Variable speed (0 to 950 rpm) for drilling in a wide variety of materials
- Variable speed (0 to 950 rpm) for drilling in a wide variety of materials
- Retractable belt clip allows operation in tight areas
- Ergonomically designed rubberized grips for comfortable operation
KIT DRIVER IMPACT BRSHLS 18V
M091-84869
The electronically controlled BL™ brushless motor efficiently uses energy to match torque and rpm to the changing demands of the application
KIT DRVR-DRL BRSHLS 18V 1/2IN
M091-86634
- Mechanical two-speed transmission (0 to 500 and 0 to 1900 rpm) for a wide range of drilling and fastening applications
- The BL™ brushless motor eliminates carbon brushes, enabling the BL™ motor to run cooler and more efficiently for longer life
- The BL™ brushless motor eliminates carbon brushes, enabling the BL™ motor to run cooler and more efficiently for longer life
- The electronically-controlled BL™ brushless motor efficiently uses energy to match torque and rpm to the changing demands of the application
- Extreme Protection Technology (XPT™) engineered for improved dust and water resistance for operation in harsh job site conditions
Makita 4329K Jig Saw, 3.9 A, 2-9/16 in Wood, 1/4 in Steel Cutting Capacity, 11/16 in L Stroke, 500 t
M091-08330
Through-the-body dust port provides optimal dust management with use of clear dust cover and vacuum
Makita 5477NB Circular Saw, 15 A, 7-1/4 in Dia Blade, 5/8 in Arbor, 0 to 51.5 deg Bevel
M091-09613
- Hypoid gears deliver more power and have greater surface contact than conventional worm drive gears
- Powerful 15 A motor for increased productivity
- Powerful 15 A motor for increased productivity
- Oil bath technology and sealed gear housing for less maintenance
- 0 to 51.5 deg bevel capacity with positive stops at 45 deg and 51.5 deg is ideal for truss and rafter cut-outs
Makita 743081-8 Backing Pad with Hook and Loop Attachment, 5 in Dia, Rubber
M091-35004
- Hook-and-loop design for quick abrasive paper changes
- Durable construction for long life
- Durable construction for long life
- Eight-hole design for efficient dust extraction
- For sanding flat surfaces
Makita 9237CX3 Polisher, 10 A, 5/8-11 Spindle, 0 to 3200 rpm Speed, Loop Handle, Electronic Control
M091-68848
- Variable speed dial and trigger enables user to match the speed to the application
- Constant speed control maintains constant speed under load
- Constant speed control maintains constant speed under load
- Soft start for smooth start-ups and less fling off of polish, wax or paste
- Rubberized loop handle and gear housing for operator comfort and to help protect delicate surfaces from damage
Makita 9404 Belt Sander with Variable Speed, 8.8 A, 24 in L x 4 in W Belt, Abrasive Belt, D-Handle H
M091-03266
- Auto-tracking belt system tracks belt without adjustment
- Innovative design for sanding flush to wall with nose and side of sander
- Innovative design for sanding flush to wall with nose and side of sander
- Long 16.4 ft power cord for easier maneuverability
- Dust bag for a cleaner work environment
Makita 9557NB Angle Grinder, 7.5 A, 4-1/2 in Dia Wheel, 11,000 rpm Speed
M091-06244
Thicker coil wires are wound more closely to reduce heat and energy loss
Makita 9557PBX1 Angle Grinder, 7.5 A, 3-1/2 in Dia Wheel, 11,000 rpm Speed
M091-08584
- Small diameter barrel grip for added comfort
- Labyrinth construction prevents debris from penetrating the motor, bearings and gears for longer tool life
- Labyrinth construction prevents debris from penetrating the motor, bearings and gears for longer tool life
- Lock-On or Off button for continuous operation
- AC or DC switch for use with alternative power source
Makita 9564CV Angle Grinder, 115 V, 13 A, 4-1/2 in Dia Wheel, 2800 to 10,500 rpm Speed
M091-03724
- Powerful 13 A motor delivers more output and variable
- SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop
- SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop
- Variable speed control dial enables user to match the speed to the application
- Constant speed control automatically applies additional power to the motor to maintain speed under load
Makita AN924 21 Full Round Head 3-1/2" Framing Nailer
M091-85709
- Faster nail driving speed for maximum performance
- Large capacity air chamber for increased power to drive nails up to 3-1/2 in x 0.148 in diameter
- Large capacity air chamber for increased power to drive nails up to 3-1/2 in x 0.148 in diameter
- Drives 21 deg plastic collated framing nails from 2 in to 3-1/2 in length and 0.113 to 0.148 in diameter
- Lightweight design at only 8.3 lb
Makita B-61656-10 Circular Saw Blade, 7-1/4 in Dia, 5/8 in Arbor, 24-Teeth, Carbide Cutting Edge
M091-52787
- Up to 70% more cuts per charge compared to standard blades
- Up to 70% faster cutting compared to standard blades
- Up to 70% faster cutting compared to standard blades
- Ultra-thin 0.057 in kerf reduces the load put on the tool
- High-grade tungsten carbide tips for durability
Makita Big Bore MAC2400 Electric Air Compressor, Tool Only, 4.2 gal Tank, 2-1/2 hp, 130 psi Pressure
M091-05353
- Powerful 2.5 hp four pole motor produces 4.2 cfm at 90 psi for increased productivity and lower noise
- Roll-cage construction provides complete protection to withstand extreme jobsite environments
- Roll-cage construction provides complete protection to withstand extreme jobsite environments
- Pump is oil-lubricated for cooler running temperatures and reduced wear
- Copper finned discharge tubing for increased heat dissipation and reduced water in the tank
Makita Big Bore MAC5200 Electric Air Compressor, Tool Only, 5.2 gal Tank, 3 hp, 140 psi Pressure, 6.
M091-05354
- Pump is oil-lubricated for cooler running temperatures and reduced wear
- Durable cast iron cylinder reduces wear and increases pump life and is removable for easy maintenance
- Durable cast iron cylinder reduces wear and increases pump life and is removable for easy maintenance
- Folding handle with low-profile design for easy storage with handle folded
- Tool hangers store tools when not in use