Milwaukee
Milwaukee branded products
Milwaukee 45-96-9518 Combination Wrench, Metric, 18 mm Head, 9-1/4 in L, 12-Point, Steel, Chrome
M076-57385
- Ink filled size labels
- MAX BITE open end grip
- MAX BITE open end grip
- Comfortable I-beam handle design
- 25% more torque
Milwaukee 45-96-9519 Combination Wrench, Metric, 19 mm Head, 9.84 in L, 12-Point, Steel, Chrome
M076-57386
- Ink filled size labels
- MAX BITE open end grip
- MAX BITE open end grip
- Comfortable I-beam handle design
- 25% more torque
Milwaukee 45-96-9520 Combination Wrench, Metric, 20 mm Head, 10.31 in L, 12-Point, Steel, Chrome
M076-57387
- Ink filled size labels
- MAX BITE open end grip
- MAX BITE open end grip
- Comfortable I-beam handle design
- 25% more torque
Milwaukee 45-96-9521 Combination Wrench, Metric, 21 mm Head, 10.71 in L, 12-Point, Steel, Chrome
M076-57388
- Ink filled size labels
- MAX BITE open end grip
- MAX BITE open end grip
- Comfortable I-beam handle design
- 25% more torque
Milwaukee 45-96-9522 Combination Wrench, Metric, 22 mm Head, 11.61 in L, 12-Point, Steel, Chrome
M076-57389
- Ink filled size labels
- MAX BITE open end grip
- MAX BITE open end grip
- Comfortable I-beam handle design
- 25% more torque
Milwaukee 45340014 Drive Socket, 14 mm Socket, 3/8 in Drive, 6-Point, Chrome
M076-56610
- Four Flat sides deter rolling
- Wrench-ready Four Flat sides
- Wrench-ready Four Flat sides
- Stamped sizes for better visibility
- Optimized geometry to prevent rounding
Milwaukee 45340015 Drive Socket, 15 mm Socket, 3/8 in Drive, 6-Point, Chrome
M076-56611
- Four Flat sides deter rolling
- Wrench-ready Four Flat sides
- Wrench-ready Four Flat sides
- Stamped sizes for better visibility
- Optimized geometry to prevent rounding
Milwaukee 48-00-1301 Reciprocating Saw Blade, 3/4 in W, 9 in L, 5 TPI
M076-08174
- Extra deep gullets easily remove chips for fast cutting
- Induction hardened teeth for long life
- Induction hardened teeth for long life
- Unique fleam ground teeth cut in both directions for clean cuts
Milwaukee 48-00-1420 Reciprocating Saw Blade, 3/4 in W, 6 in L
M076-08195
- Tungsten carbide for long life
- Coarse grit for fast cutting
- Coarse grit for fast cutting
- For cutting stone, slate, clay pipe, brick, plaster, marble and chalkboard
Milwaukee 48-00-1430 Reciprocating Saw Blade, 3/4 in W, 9 in L
M076-08200
- Tungsten carbide for long life
- Coarse grit for fast cutting
- Coarse grit for fast cutting
- For cutting stone, slate, clay pipe, brick, plaster, marble and chalkboard
Milwaukee 48-00-1440 Reciprocating Saw Blade, 1 in W, 6 in L, Diamond Cutting Edge
M076-18739
- Diamond-grit delivers up to 30X longer life than standard carbide-grit blades, the result is a significantly lower cost per cut
- A thicker, more rigid blade body resists fracturing and bending for maximum durability
- A thicker, more rigid blade body resists fracturing and bending for maximum durability
- The precisely controlled size and placement of the diamond-grit allow these blades to cut up to 2X faster than standard carbide-grit blades
- The 1 in tall blade body reduces blade twisting for straighter, more accurate cuts
Milwaukee 48-00-1450 Reciprocating Saw Blade, 3/4 in W, 9 in L, Diamond Cutting Edge
M076-18741
- Diamond-grit delivers up to 30X longer life than standard carbide-grit blades, the result is a significantly lower cost per cut
- A thicker, more rigid blade body resists fracturing and bending for maximum durability
- A thicker, more rigid blade body resists fracturing and bending for maximum durability
- The precisely controlled size and placement of the diamond-grit allow these blades to cut up to 2X faster than standard carbide-grit blades
- The 1 in tall blade body reduces blade twisting for straighter, more accurate cuts
Milwaukee 48-00-1600 Reciprocating Saw Blade, 2-1/8 in W, 12 in L, 5 TPI, Diamond Cutting Edge
M076-25327
- Unique blade geometry protects against floor impacts during bottom plate cutouts
- Double-truss design guides blade for straight window cut outs
- Double-truss design guides blade for straight window cut outs
- Unique design protects against tooth fracture when cutting nails between studs and joists
- Fang tip delivers fast plunge cutting for window cutouts
Milwaukee 48-00-1610 Reciprocating Saw Blade, 1/2 in W, 7-3/8 in L, 5 TPI
M076-25328
- Low blade profile cuts 2-1/8 in Dia holes for 1-1/2 in PVC pipe
- 7-3/8 in length allows blade to cut holes through double top plates
- 7-3/8 in length allows blade to cut holes through double top plates
- Unique design protects against tooth fracture when cutting holes through nail embedded wood
- Fang tip delivers fast plunge cutting through bottom plates and subfloors
Milwaukee 48-00-1630 Reciprocating Saw Blade, 1/2 in W, 3-1/3 in L, 30 TPI, Bi-Metal Cutting Edge
M076-30017
- Pierce-point tip geometry for quick plunging in ductwork with on tool
- Low blade profile for tight radius cuts
- Low blade profile for tight radius cuts
- Optimized tooth form designed specifically for cutting ductwork
- For unique applications involving sheet metal
Milwaukee 48-00-1640 Reciprocating Saw Blade, 1/4 in W, 2-1/2 in L, 3 TPI, Bi-Metal Cutting Edge
M076-30018
- Cuts in all directions
- Optimized length to minimize damage to pipe and wire
- Optimized length to minimize damage to pipe and wire
- Fast plunge
Milwaukee 48-00-5015 Reciprocating Saw Blade, 3/4 in W, 6 in L, 6 TPI, Bi-Metal Cutting Edge
M076-08262
- Deep gullet design cuts up to 25% faster than standard wood blades
- Fleam ground process creates super sharp teeth for clean cuts
- Fleam ground process creates super sharp teeth for clean cuts
- Matrix II bi-metal teeth for greater durability
- For fast cutting and a smooth edge in nail free wood and plastics
Milwaukee 48-00-5016 Reciprocating Saw Blade, 3/4 in W, 9 in L, 6 TPI, Bi-Metal Cutting Edge
M076-08263
- Deep gullet design cuts up to 25% faster than standard wood blades
- Fleam ground process creates super sharp teeth for clean cuts
- Fleam ground process creates super sharp teeth for clean cuts
- Matrix II bi-metal teeth for greater durability
- For cutting nails
Milwaukee 48-00-5017 Reciprocating Saw Blade, 3/4 in W, 12 in L, 6 TPI
M076-08264
- Deep gullet design cuts up to 25% faster than standard wood blades
- Matrix II bi-metal teeth for greater durability
- Matrix II bi-metal teeth for greater durability
- Fleam ground process creates super sharp teeth for clean cuts
- For fast, clean cuts
Milwaukee 48-00-5091 Reciprocating Saw Blade, 3/4 in W, 6 in L, 8/12 TPI, Bi-Metal Cutting Edge
M076-08275
- Double relief angle reduces tooth stress for long life
- Precision forming process creates sharper teeth for fast cutting
- Precision forming process creates sharper teeth for fast cutting
- Matrix II bi-metal teeth for greater durability