Need More Help? 718-499-1119
Search
National Hardware
National Hardware branded products
National Hardware 1154BC Series N351-497 Corner Brace, 2.4 in L, 3 in W, 2.4 in H, Steel, 3/16 Thick
N042-00598
- Used for reinforcing 90 deg angles by applying to the inside or outside of the corner
- Square shape provides greater area of stability for wider pieces of building materials
- Square shape provides greater area of stability for wider pieces of building materials
- Single bolt holes for easy installation
- Rounded corners for finished look
National Hardware 1155BC Series N351-498 Corner Brace, 6.8 in L, 3 in W, 3 in H, Steel, Powder-Coate
N042-00599
- Used to reinforce a 90 deg angle through application on the inside
- Extra length on one leg gives extra reach to provide greater stability
- Extra length on one leg gives extra reach to provide greater stability
- Chamfered corners provide decorative look
- Black powder coat finish for improved weather resistance
National Hardware 1155BC Series N351-499 Corner Brace, 6.8 in L, 3 in W, 3 in H, Steel, Powder-Coate
N042-00600
- Used to reinforce a 90 deg angle through application on the inside
- Extra length on one leg gives extra reach to provide greater stability
- Extra length on one leg gives extra reach to provide greater stability
- Chamfered corners provide decorative look
- Black powder coat finish for improved weather resistance
National Hardware 1156BC Series N351-500 Corner Brace, 4.9 in L, 3 in W, 4.9 in H, Steel, 1/8 Thick
N042-00601
- Used for reinforcing 90 deg angles by applying to the inside or outside of the corner
- Larger bolt holes provide options for structural support
- Larger bolt holes provide options for structural support
- Chamfered corners provide decorative look
- Black powder coat finish for improved weather resistance
National Hardware 1157BC Series N351-501 Corner Brace, 6-1/4 in L, 3 in W, 6-1/4 in H, Steel, Powder
N042-00602
- Used for reinforcing 90 deg angles by applying to the inside or outside of the corner
- Chamfered corners provide decorative look
- Chamfered corners provide decorative look
- Larger bolt holes provide options for structural support
- Black powder coat finish for improved weather resistance
National Hardware 115BC Series N220-145 Corner Brace, 4 in L, 7/8 in W, Steel, Zinc, 0.12 Thick Mate
N042-11351
- Hole sizes fit Phillips flat screws sized #10
- Drill a pilot hole with a 7/64 in sized drill bit when using wood screws
- Drill a pilot hole with a 7/64 in sized drill bit when using wood screws
- Used for reinforcing inside of right angle corner joints
- Black powder coat finish for improved weather resistance
National Hardware 115BC Series N220-160 Corner Brace, 6 in L, 1-1/8 in W, 5.97 in H, Steel, Zinc
N042-15993
- Hole sizes fit Phillips flat screws sized #12
- Drill a pilot hole with a 1/8 in sized drill bit when using wood screws
- Drill a pilot hole with a 1/8 in sized drill bit when using wood screws
- Used for reinforcing inside of right angle corner joints
- Black powder coat finish for improved weather resistance
National Hardware 115BC Series N220-202 Corner Brace, 4 in L, 7/8 in W, Galvanized Steel, 0.12 Thick
N042-11353
- Hole sizes fit Phillips flat screws sized #10
- Drill a pilot hole with a 7/64 in sized drill bit when using wood screws
- Drill a pilot hole with a 7/64 in sized drill bit when using wood screws
- Used for reinforcing inside of right angle corner joints
- Black powder coat finish for improved weather resistance
National Hardware 115BC Series N220-236 Corner Brace, 8 in L, 1-1/4 in W, Galvanized Steel, 0.22 Thi
N042-11366
- Hole sizes fit Phillips flat screws sized #12
- Drill a pilot hole with a 1/8 in sized drill bit when using wood screws
- Drill a pilot hole with a 1/8 in sized drill bit when using wood screws
- Used for reinforcing inside of right angle corner joints
- Black powder coat finish for improved weather resistance
National Hardware 115BC Series N266-304 Corner Brace, 1-1/2 in L, 5/8 in W, Steel, Zinc, 0.08 Thick
N042-11312
- Hole sizes fit Phillips flat screws sized #7
- Drill a pilot hole with a 3/32 in sized drill bit when using wood screws
- Drill a pilot hole with a 3/32 in sized drill bit when using wood screws
- Used for reinforcing inside of right angle corner joints
- Black powder coat finish for improved weather resistance
National Hardware 115BC Series N266-338 Corner Brace, 2-1/2 in L, 5/8 in W, Steel, Zinc, 0.1 Thick M
N042-11322
- Hole sizes fit Phillips flat screws sized #8
- Drill a pilot hole with a 3/32 in sized drill bit when using wood screws
- Drill a pilot hole with a 3/32 in sized drill bit when using wood screws
- Used for reinforcing inside of right angle corner joints
- Black powder coat finish for improved weather resistance
National Hardware 115BC Series N266-361 Corner Brace, 2 in L, 5/8 in W, Steel, Zinc, 0.08 Thick Mate
N042-11329
- Hole sizes fit Phillips flat screws sized #8
- Drill a pilot hole with a 3/32 in sized drill bit when using wood screws
- Drill a pilot hole with a 3/32 in sized drill bit when using wood screws
- Used for reinforcing inside of right angle corner joints
- Black powder coat finish for improved weather resistance
National Hardware 115BC Series N266-395 Corner Brace, 3 in L, 3/4 in W, Steel, Zinc, 0.11 Thick Mate
N042-11344
- Hole sizes fit Phillips flat screws sized #9
- Drill a pilot hole with a 7/64 in sized drill bit when using wood screws
- Drill a pilot hole with a 7/64 in sized drill bit when using wood screws
- Used for reinforcing inside of right angle corner joints
- Black powder coat finish for improved weather resistance
National Hardware 115BC Series N266-478 Corner Brace, 3/4 in L, 1/2 in W, Steel, 0.07 Thick Material
N042-01452
- Use #7 flat head screw
- Drill a pilot hole with a 5/64 in sized drill bit when using wood screws
- Drill a pilot hole with a 5/64 in sized drill bit when using wood screws
- Used for reinforcing inside of right angle corner joints
- Black powder coat finish for improved weather resistance
National Hardware 115BC Series N266-479 Corner Brace, 1 in L, 1/2 in W, Steel, 0.07 Thick Material
N042-01453
- Use #7 flat head screw
- Drill a pilot hole with a 5/64 in sized drill bit when using wood screws
- Drill a pilot hole with a 5/64 in sized drill bit when using wood screws
- Used for reinforcing inside of right angle corner joints
- Black powder coat finish for improved weather resistance
National Hardware 115BC Series N266-480 Corner Brace, 1-1/2 in L, 5/8 in W, Steel, 0.08 Thick Materi
N042-01454
- Use #7 flat head screw
- Drill a pilot hole with a 5/64 in sized drill bit when using wood screws
- Drill a pilot hole with a 5/64 in sized drill bit when using wood screws
- Used for reinforcing inside of right angle corner joints
- Black powder coat finish for improved weather resistance
National Hardware 115BC Series N266-481 Corner Brace, 2 in L, 5/8 in W, Steel, 0.08 Thick Material
N042-01455
- Use #8 flat head screw
- Drill a pilot hole with a 3/32 in sized drill bit when using wood screws
- Drill a pilot hole with a 3/32 in sized drill bit when using wood screws
- Used for reinforcing inside of right angle corner joints
- Black powder coat finish for improved weather resistance
National Hardware 115BC Series N266-482 Corner Brace, 2-1/2 in L, 5/8 in W, Steel, 0.01 Thick Materi
N042-01456
- Use #8 flat head screw
- Drill a pilot hole with a 3/32 in sized drill bit when using wood screws
- Drill a pilot hole with a 3/32 in sized drill bit when using wood screws
- Used for reinforcing inside of right angle corner joints
- Black powder coat finish for improved weather resistance
National Hardware 115BC Series N266-483 Corner Brace, 3 in L, 3/4 in W, Steel, 0.011 Thick Material
N042-01457
- Use #9 flat head screw
- Drill a pilot hole with a 7/64 in sized drill bit when using wood screws
- Drill a pilot hole with a 7/64 in sized drill bit when using wood screws
- Used for reinforcing inside of right angle corner joints
- Black powder coat finish for improved weather resistance
National Hardware 115BC Series N266-484 Corner Brace, 3-1/2 in L, 3/4 in W, Steel, 1/8 Thick Materia
N042-01458
- Use #9 flat head screw
- Drill a pilot hole with a 7/64 in sized drill bit when using wood screws
- Drill a pilot hole with a 7/64 in sized drill bit when using wood screws
- Used for reinforcing inside of right angle corner joints
- Black powder coat finish for improved weather resistance
Payment options
