Search
All Categories
    Menu Close

    Pliers

    View as Grid List
    Sort by
    414-8701125.jpg

    Cobra Water Pump Pliers, 7 in, 11 Adj.

    K116-180SB
    • Box joint construction
    • Press button action for fast and firm adjustment directly on the work piece
    • Selected jaw opening is positively ensured
    • The guard prevents operators' fingers from bring pinched
    • Self-gripping on pipes and nuts
    + -
    TPP02141.jpg

    Combination Pliers

    12373
    + -
    P039-03138.jpg

    Combination Pliers, 9 9/16 in, Grip Handle

    P039-03138
    • Precision machined mating surfaces
    + -
    414-KN0202-8.jpg

    Combination/Linemans Pliers, 8 in Length, Knipex Comfort Handle

    K116-02028
    • High leverage, eccentric point
    • Additional serrated round jaws for gripping small work pieces
    • Designed to cut piano wire and other solid wires with minimum effort
    • Long cutting edges for thicker cables, long-lasting under the toughest conditions
    • Cutting edges separately induction-hardened (64 HRC)
    + -
    414-9901250.jpg

    Concretors' Nippers, 10 in, Polished, Plastic Coated Grip

    K116-59910
    • For reinforced wires
    • To twist and cut binding wire in one operation
    + -
    P039-03170.jpg

    Convertible Retaining Ring Pliers

    P039-03170
    • Converts from external to internal rings
    • Precision formed and induction hardened fixed tips
    + -
    P039-03174.jpg

    Convertible Retaining Ring Pliers

    P039-03174
    • Converts from external to internal rings
    • Precision formed and induction hardened fixed tips
    + -
    1206655.jpg

    Crescent 508CVNN Lineman's Solid Joint Plier, 8-5/16 in OAL, 11 AWG Cutting Capacity, Red Handle, Sp

    C643-32402
    • Designed for electrical work
    • Electronically induction hardened, durable and keen side cutting edges
    • Electronically induction hardened, durable and keen side cutting edges
    + -
    1206796.jpg

    Crescent 6546CVSMLNN Solid Joint Side Cutting Plier, 6-5/8 in OAL, 14 AWG Cutting Capacity, Red Hand

    C643-21283
    • Long chain nose with fine serrated jaws to make wire loops and bends
    • Electronically induction hardened hand-honed, keen side cutting edges
    • Electronically induction hardened hand-honed, keen side cutting edges
    • Individually tested for strength and cutting ability
    • Polished head
    + -
    1206804.jpg

    Crescent 6547CVNN Long Chain Nose Plier, 7-1/2 in OAL, 14 AWG Cutting Capacity, Red Handle, 3/4 in W

    C643-32317
    • Designed for reaching confined areas
    • Long chain nose with fine serrated jaws to make wire loops and bends
    • Long chain nose with fine serrated jaws to make wire loops and bends
    • Electronically induction hardened hand-honed, keen side cutting edges
    • Made of forged alloy tool steel
    + -
    1205681.jpg

    Crescent 728CVNN Nipper Plier, 12 AWG Cutting Capacity, 8-1/4 in OAL

    C643-21311
    • Precision manufactured from forged alloy tool steel
    • Each angled cutting edge is electronically induction hardened
    • Each angled cutting edge is electronically induction hardened
    • Thin throat and flush rivet size for improved access
    • Cushion grip handles provide a leverage ratio for easier cutting
    + -
    1205707.jpg

    Crescent 729CVNN End Cutting Nipper Plier, 12 AWG Cutting Capacity, Alloy Steel Jaw, 9-1/4 in OAL

    A123-21314
    • Precision manufactured from forged alloy steel tool
    • Each angled cutting edge is electronically induction hardened
    • Each angled cutting edge is electronically induction hardened
    • Thin throat and flush rivet size for improved access
    • Cushion grip handles provide a leverage ratio for easier cutting
    + -
    1206812.jpg

    Crescent 7776CVNN Solid Joint Plier, 6-1/2 in OAL, Red Handle, Cushion-Grip Handle, 11/16 in W Jaw,

    C643-21337
    • Designed for work in tight, narrow areas
    • Long needle nose with excellent gripping ability
    • Long needle nose with excellent gripping ability
    • Made of forged alloy tool steel and individually tested for strength
    • Polished head, red double-dipped cushion handle grips
    + -
    1205657.jpg

    Crescent 9336CVNN Cutting Plier, 6 in OAL, 12 AWG Cutting Capacity, Red Handle, Double Dipped Cushio

    A123-21319
    • Designed for general wire cutting in confined spaces
    • Electronically induction hardened and hand honed
    • Electronically induction hardened and hand honed
    • Long cutting edges for harder wires
    • Round joint design
    + -
    1205590.jpg

    Crescent C10CVN-08 Locking Plier with Wire Cutter, 10 in OAL, 1-7/8 in Jaw Opening, Rawhide Handle,

    C643-35035
    • Maximum jaw opening size matches ASME specifications
    • Knurled adjusting screw turns easily by hand or with a hex key inserted into the hex key receiver on bottom of screw
    • Knurled adjusting screw turns easily by hand or with a hex key inserted into the hex key receiver on bottom of screw
    • Compound action for powerful non-slip locking grip
    • After initial grip is set, pliers can be tightened further by turning the adjusting screw with a hex key
    + -
    C643-35036.jpg

    Crescent C10SVN/C10SV Locking Plier, 10 in OAL, 1-7/8 in Jaw Opening, Non-Slip Grip Handle

    C643-35036
    • Angled tooth pattern for better grip
    • Nickel-plated finish resists corrosion
    • Nickel-plated finish resists corrosion
    • Compound action for powerful non-slip locking grip
    • Red plastisol dip on release lever for improved comfort and crescent brand identity
    + -
    0376087.jpg

    Crescent C5CVN/C5CV Locking Plier, 5 in OAL, 1-1/4 in Jaw Opening, Non-Slip Grip Handle

    C643-35030
    • Angled tooth pattern for better grip
    • Nickel-plated finish resists corrosion
    • Nickel-plated finish resists corrosion
    • Compound action for powerful non-slip locking grip
    • Red plastisol dip on release lever for improved comfort and crescent brand identity
    + -
    1483320.jpg

    Crescent C6NVN/C6NV Locking Plier, 6 in OAL, 2-1/4 in Jaw Opening, Non-Slip Grip Handle

    C643-35032
    • Angled tooth pattern for better grip
    • Nickel-plated finish resists corrosion
    • Nickel-plated finish resists corrosion
    • Compound action for powerful non-slip locking grip
    • Long nose with wire cutter gets to hard-to-reach spots
    + -
    1207299.jpg

    Crescent C7CVN Locking Plier, 7 in OAL, 1-5/8 in Jaw Opening, Non-Slip Grip Handle

    C643-35033
    • Angled tooth pattern for better grip
    • Nickel-plated finish resists corrosion
    • Nickel-plated finish resists corrosion
    • Compound action for powerful non-slip locking grip
    • Red plastisol dip on release lever for improved comfort and crescent brand identity
    + -
    1207307.jpg

    Crescent C7SVN/C7SV Locking Plier, 7 in OAL, 1-5/8 in Jaw Opening, Non-Slip Grip Handle

    C643-29953
    • Angled tooth pattern for better grip
    • Nickel-plated finish resists corrosion
    • Nickel-plated finish resists corrosion
    • Compound action for powerful non-slip locking grip
    • Red plastisol dip on release lever for improved comfort and crescent brand identity
    + -
    3105798.jpg

    Crescent C9NVN/C9NV Locking Plier, 9 in OAL, 2-7/8 in Jaw Opening, Non-Slip Grip Handle

    C643-35034
    • Angled tooth pattern for better grip
    • Nickel-plated finish resists corrosion
    • Nickel-plated finish resists corrosion
    • Compound action for powerful non-slip locking grip
    • Long nose with wire cutter gets to hard-to-reach spots
    + -
    1206432.jpg

    Crescent CCA5428 Diagonal Cutting Plier, 8 in OAL, 1/2 in Cutting Capacity, Red Handle

    C643-27449
    • Unique pivot action design requires 40% less force to cut
    • Unlike standard pliers that pivot on the center-bolt only, additional leverage can be applied
    • Unlike standard pliers that pivot on the center-bolt only, additional leverage can be applied
    • Forged steel body for strength and durability
    • Induction hardened cutting edge stays sharper, longer
    + -
    1207349.jpg

    Crescent CCASET2 Plier Set, Steel, Polished

    C643-27451
    • Unique pivot action design requires 40% less force to cut
    • Unlike standard pliers that pivot on the center-bolt only, additional leverage can be applied
    • Unlike standard pliers that pivot on the center-bolt only, additional leverage can be applied
    • Forged steel body for strength and durability
    • Induction hardened cutting edge for long life
    + -
    Refine
    ×