Need More Help? 718-499-1119
Search
Plumbing Fittings
WATTS 3520-1013/P-639 Swivel Pipe Elbow, 1/2 x 3/4 in, 90 deg Angle, Plastic, Off-White, 100 psi Pre
W054-29944
- Higher flow compared to barb fittings, no internal restrictions
- No tools necessary for installation or removal
- No tools necessary for installation or removal
- Rotates under pressure
- Connects to multiple materials
WATTS 3519-1006/P-631 Pipe Elbow, 1/2 x 3/8 in, 90 deg Angle, Plastic, Off-White, 100 psi Pressure
W054-29936
- Higher flow compared to barb fittings, no internal restrictions
- Connects to multiple materials
- Connects to multiple materials
- Rotates under pressure
- No tools necessary for installation or removal
WATTS 3518-10/P-636 Tube Elbow, 1/2 in, 90 deg Angle, Plastic, Off-White, 100 psi Pressure
W054-29947
- Rotates under pressure
- Connects to multiple materials
- Connects to multiple materials
- No tools necessary for installation or removal
- Higher flow compared to barb fittings, no internal restrictions
WATTS 3515R-1410/P-801 Reducing Pipe Union, 3/4 x 1/2 in, Plastic, 250 psi Pressure
W054-29987
- For use in hot and cold water applications
WATTS 3518-14/P-836 Tube Elbow, 3/4 in, 90 deg Angle, Plastic, Off-White, 100 psi Pressure
W054-29995
- No tools necessary for installation or removal
- Connects to multiple materials
- Connects to multiple materials
- Higher flow compared to barb fittings, no internal restrictions
- Rotates under pressure
WATTS 3518B-18 Pipe Elbow, 1 in, 90 deg Angle, Polysulfide, Off-White, 100 psi Pressure
W054-35315
- Quick-connect fitting with integral collet and O-ring guide
- Fitting shall be able to fully rotate under pressure and allow for easy disconnect and reuse without the use of disconnection tools
- Fitting shall be able to fully rotate under pressure and allow for easy disconnect and reuse without the use of disconnection tools
- Fitting must not disassemble to disconnect
- For commercial and residential use
WATTS 3519B-1816 Pipe Elbow, 1 in, 90 deg Angle, Polysulfide, Off-White, 100 psi Pressure
W054-35316
- Rotates under pressure
- Manufactured from polysulfone
- Manufactured from polysulfone
- No tools necessary for installation or removal
- Patented collet design
SharkBite U286LFA Pipe Elbow, 3/4 in, 90 deg Angle, Brass, 200 psi Pressure
S209-00262
- No special tools, crimping, glue or soldering required
- Can be installed in wet lines
- Can be installed in wet lines
- Approved for underground and behind the wall applications with no access panels (wrapping required when burying underground)
SharkBite U004LFA Tube Coupling, 1/4 in, Brass, 200 psi Pressure
S209-00804
- Instant push-fit connection for increased ease-of-use
- Integral pipe liner for PEX installations ensures secure and reliable connection
- Integral pipe liner for PEX installations ensures secure and reliable connection
- Compact, robust lead-free DZR brass body resists corrosion
- For potable water distribution as well as hydronic heating applications
SharkBite U110LFA Pipe Connector, 1/4 x 1/2 in, MNPT, Brass, 200 psi Pressure
S209-00805
- Instant push-fit connection for increased ease-of-use
- Compact, robust lead-free DZR brass body-resists corrosion
- Compact, robust lead-free DZR brass body-resists corrosion
- Proven durability and quality
- For hydronic heating as well as potable water distribution
SharkBite UC072LFA10 Pipe Adapter, 1/2 in, Barb x FNPT, Brass, 80 to 160 psi Pressure
S209-02237
- Made from lead-free DZR ecobrass
- Connects to PEX pipe with copper crimp rings or stainless steel clamps
- Connects to PEX pipe with copper crimp rings or stainless steel clamps
- Minimum working temperature 33 deg F at 160 psi and maximum working temperature 200 deg F at 80 psi
- Certified for potable and radiant heating applications
SharkBite UC088LFA5 Pipe Adapter, 3/4 in, Barb x FNPT, Brass, 80 to 160 psi Pressure
S209-02240
- Made from lead-free DZR ecobrass
- Connects to PEX pipe with copper crimp rings or stainless steel clamps
- Connects to PEX pipe with copper crimp rings or stainless steel clamps
- Minimum working temperature 33 deg F at 160 psi and maximum working temperature 200 deg F at 80 psi
- Certified for potable and radiant heating applications
SharkBite UC134LFA10 Pipe Connector, 3/4 in, MNPT, Brass, 160 psi Pressure
S209-02244
- Made from lead-free DZR ecobrass
- Connects to PEX pipe with copper crimp rings or stainless steel clamps
- Connects to PEX pipe with copper crimp rings or stainless steel clamps
- Certified for potable and radiant heating applications
- For hot and cold potable water systems and radiant heating (glycol up to 100% mix) applications
SharkBite UC120LFA10 Pipe Adapter, 1/2 in, MNPT, Brass, 80 to 160 psi Pressure
S209-02242
- Made from lead-free DZR ecobrass
- Connects to PEX pipe with copper crimp rings or stainless steel clamps
- Connects to PEX pipe with copper crimp rings or stainless steel clamps
- Minimum working temperature 33 deg F at 160 psi and maximum working temperature 200 deg F at 80 psi
- Certified for potable and radiant heating applications
SharkBite UC008LFA10 Coupling, 1/2 in, Barb, Brass, 80 to 160 psi Pressure
S209-03009
- Made from lead-free DZR ecobrass
- Connects to PEX pipe with copper crimp rings or stainless steel clamps
- Connects to PEX pipe with copper crimp rings or stainless steel clamps
- Minimum working temperature 33 deg F at 160 psi, maximum working temperature 200 deg F at 80 psi
- Certified for potable and radiant heating applications
SharkBite UC016LFA10 Coupling, 3/4 in, Barb, Brass, 80 to 160 psi Pressure
S209-03010
- Made from lead-free DZR ecobrass
- Connects to PEX pipe with copper crimp rings or stainless steel clamps
- Connects to PEX pipe with copper crimp rings or stainless steel clamps
- Minimum working temperature 33 deg F at 160 psi, maximum working temperature 200 deg F at 80 psi
- Certified for potable and radiant heating applications
SharkBite UC248LFA10 Pipe Elbow, 1/2 in, Barb, 90 deg Angle, Brass, 80 to 160 psi Pressure
S209-03011
- Made from lead-free DZR ecobrass
- Connects to PEX pipe with copper crimp rings or stainless steel clamps
- Connects to PEX pipe with copper crimp rings or stainless steel clamps
- Minimum working temperature 33 deg F at 160 psi and maximum working temperature 200 deg F at 80 psi
- Certified for potable and radiant heating applications
Payment options
