Need More Help? 718-499-1119
Search
Power Drills & Drivers
Milwaukee RED HELIX 48-89-2315 Jobber Drill Bit, 9/32 in Dia, 4.33 in OAL, Twist Flute, 2-Flute, 9/3
M076-18830
- Up to 10X life vs black oxide
- RED HELIX design for rapid chip removal
- RED HELIX design for rapid chip removal
- 135 deg split point for precision start
- Chip Breaker decreased heat build-up
SAW HOLE W/CARB TEETH 2-9/16IN
M076-50060
- Three-tooth design for fast aggressive cuts
- Three-tooth design for fast aggressive cuts
- Carbide tipped multi-material pilot bit for increased material versatility
- Thicker backer for extreme life in demanding applications
- Enlarged braze surface for stronger bond to the carbide teeth
Diablo DHS2500CT GP Hole Saw, 2-1/2 in Dia, 2-3/8 in D Cutting, 3/8 in Arbor, Carbide Cutting Edge
D099-13777
- Tool-free plug ejection for fast material removal
- 50X longer cutting life
- 50X longer cutting life
- 2-3/8 in cutting depth for 40% deeper holes in one pass and increased productivity
- One-size fits all mandrel fits all Diablo hole saws
BIT DRILL IMPACT 3/8IN DEWALT
D075-41981
- Ground from solid one piece design is up to 5 times more durable than the current 2 piece conventional product
- Patented web taper increases the rigidity of the bit to decrease the potential for bit breakage
- Patented web taper increases the rigidity of the bit to decrease the potential for bit breakage
- Patented Pilot Point tip (3/16 - 1/2 in) allows users to drill holes faster than the conventional split point product and offers clean burr free holes with reduced bit walking
Vulcan Masonry Drill Bit, 5/8 x 6 in
V012-67986
- Positive tip geometry for best rotary drilling efficiency
- All sizes have 3 flats on the shank so that the chuck gets a better grip on the bit
- All sizes have 3 flats on the shank so that the chuck gets a better grip on the bit
- Wide spiral flutes efficiently remove dust and debris, from the cutting area
Vulcan 887000OR Carded Drill Bit Set, 7-Piece, High Speed Steel, Black Oxide/Polished
V012-88700
- All sizes 13/32 in and above have a 3/8 in reduced shank
- 135 deg split point eliminates the need for a center punch and keeps the drill from skating on hard materials
- 135 deg split point eliminates the need for a center punch and keeps the drill from skating on hard materials
- All sizes 13/32 in and above have a 3/8 in reduced shank
- 135 deg split point eliminates the need for a center punch and keeps the drill from skating on hard materials
Bosch Bulldog HCFC2012 Hammer Drill Bit, 3/16 in Dia, 8-1/2 in OAL, Variable Flute, 2-Flute, 3/8 in
D032-39024
- Diffusion bonding technology provides stronger carbide bond for a durable, long-lasting bit
- Long-lasting SDS Plus design provides 4X life in concrete and rebar
- Long-lasting SDS Plus design provides 4X life in concrete and rebar
- Wear mark for precise anchoring applications
- Diffusion bonding technology ensures that carbide and steel are bonded at a molecular level
DeWALT DW1122 Jobber Drill Bit, 11/32 in Dia, 4-3/4 in OAL, Parabolic Flute, 11/32 in Dia Shank, Rou
D075-24870
- 135 deg split provides greater durability to reduce breaking
- Black oxide for greater wear resistance
- Black oxide for greater wear resistance
- Tapered web eliminates the frustration of bit spinning in the chuck
- Patented core diameter reduces breakage
Milwaukee 49-56-7240 Hole Saw Arbor, 5/8-18 Thread, 7/16 in Shank, Hex Shank
M076-22580
- Made from hardened steel and alloy steel for greater durability
- Tool-free operation
- Tool-free operation
- Universal, quick change with all brands of hole saws
- No Adapters required
IRWIN 73831 Jobber Drill Bit, 31/64 in Dia, 5-7/8 in OAL, Spiral Flute, 2-Flute, 31/64 in Dia Shank
I008-73831
- Bit is constructed of M-2 high-speed steel for the excellent combination of strength, heat resistance and wear resistance
- 3/8 in reduced shank fits all 3/8 in drills
- 3/8 in reduced shank fits all 3/8 in drills
- For automotive, maintenance and repair, stationary drill press
- 3/8 in reduced shank fits all 3/8 in drills
Vulcan 289401OR Jobber Drill Bit, 15/32 in Dia, 5-3/4 in OAL, 3-Flat, Reduced Shank
V012-67923
- High speed steel with a 135 deg split point that eliminates the need for center punch and keeps drill from skating on hard surfaces
- Used to drill most ferrous and non ferrous metals
- Used to drill most ferrous and non ferrous metals
- All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck
DeWALT DW1905 Drill Bit, 25/32 in Dia, 2 in OAL, Spiral Flute, 3-Flat Shank
D075-30220
- Pilot-Point tip starts on contact for clean, accurate holes and reduces lock-up on breakthrough
- Tapered web provides greater durability to reduce breaking
- Tapered web provides greater durability to reduce breaking
- No-spin shank eliminates the frustration of bit spinning in the chuck
- Size markings are located above the shank to prevent wearing away
Diablo DHS2375CT GP Hole Saw, 2-3/8 in Dia, 2-3/8 in D Cutting, 3/8 in Arbor, Carbide Cutting Edge
D099-13776
- Tool-free plug ejection for fast material removal
- 50X longer cutting life
- 50X longer cutting life
- 2-3/8 in cutting depth for 40% deeper holes in one pass and increased productivity
- One-size fits all mandrel fits all Diablo hole saws
DeWALT Impact Ready DW2228IR Nut Driver, 7/16 in Drive, 2-9/16 in L, 1/4 in L Shank, Hex Shank
D075-02802
- Industrial-strength magnet maximizes fastener retention
- Recessed corners drives on flats, which minimizes shavings
- Recessed corners drives on flats, which minimizes shavings
- Product designed for use in impact drivers and wrenches
- Withstands up to 2000 in-lb of torque
Milwaukee 2505-22 Drill/Driver Kit, Battery Included, 12 V, 3/8 in Chuck, Keyless Chuck
M076-54123
- Right angle attachment provides efficient fastening and or drilling at 90 deg for unrivaled access in tight spaces
- Inline-grip allows for maximum tool control and easier access to hard to reach places
- Inline-grip allows for maximum tool control and easier access to hard to reach places
- Offset attachment provides ultimate access to tight corners and will not damage or mar finished materials when fastening
- All metal 3/8 in chuck and 1/4 in hex attachments add to user productivity by delivering the versatility to efficiently perform most drilling and fastening applications
IRWIN 326022 Rotary Hammer Drill Bit, 3/4 in Dia, 6 in OAL, Percussion, Twist Flute, 2-Flute, 3/4 in
I008-00926
- Fits all hammer drills with 3-jaw or Jacobs chuck
- Patented flute geometry removes dust from the hole quicker for fast drilling and long life
- Patented flute geometry removes dust from the hole quicker for fast drilling and long life
- Shot-peened, double-tempered finish reduces breakage
- Copper braze material gives high heat resistance for reduced tip loss
IRWIN 49614 Drill Bit, 1/4 in Dia, 3-31/32 in OAL, Spiral Flute, 2-Flute, 1/4 in Dia Shank, Reduced
I008-49614
- Brad point tip provides accurate positioning for starting the hole
- Bit is precision ground for use in furniture making, doweling, cabinetry and other woodworking applications where an exact hole size is required
- Bit is precision ground for use in furniture making, doweling, cabinetry and other woodworking applications where an exact hole size is required
- Spur cutting edges reduce splintering and ensure a smooth, clean hole
- Wide flutes provide a fast, continuous flow of chips
DeWALT DW1118 Jobber Drill Bit, 9/32 in Dia, 4-1/4 in OAL, Parabolic Flute, 9/32 in Dia Shank, Round
D075-24866
- 135 deg split provides greater durability to reduce breaking
- Black oxide for greater wear resistance
- Black oxide for greater wear resistance
- Tapered web eliminates the frustration of bit spinning in the chuck
- Patented core diameter reduces breakage
Vulcan 231911OR Jobber Drill Bit, 21/64 in Dia, 4-5/8 in OAL, 3-Flat Shank
V012-67909
- High speed steel with a 135 deg split point that eliminates the need for center punch and keeps drill from skating on hard surfaces
- Used to drill most ferrous and non ferrous metals
- Used to drill most ferrous and non ferrous metals
- All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck
MILWAUKEE ELEC TOOL 48-22-9016 Framing Hmr Mil Fac 17oz
M076-48611
- Most durable grip construction
- Shockshield™ handle
- Shockshield™ handle
- I-beam handle construction
- Anti-ring claw design
Vulcan 278471OR Spade Drill Bit, 1-1/8 in Dia, Hex Shank
V012-68015
- Heat treated shaft resists bending under heavy loads
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
Payment options
