Power Drills & Drivers
IRWIN 67510 Jobber Drill Bit, 5/32 in Dia, 3-1/8 in OAL, Spiral Flute, 1-Flute, 5/32 in Dia Shank, C
I008-67510
- Bit is constructed of M-2 high-speed steel for the excellent combination of strength, heat resistance and wear resistance
- Black oxide coating resists corrosion
- Black oxide coating resists corrosion
- 135 deg split point ensures a true start and eliminates bit walking
- For general metal drilling
DeWALT DW1907 Drill Bit, 7/64 in Dia, 2-5/8 in OAL, Spiral Flute, 3-Flat Shank
D075-30231
- Pilot-Point tip starts on contact for clean, accurate holes and reduces lock-up on breakthrough
- Tapered web provides greater durability to reduce breaking
- Tapered web provides greater durability to reduce breaking
- No-spin shank eliminates the frustration of bit spinning in the chuck
- Size markings are located above the shank to prevent wearing away
DeWALT DW2570 Drill Bit, 7/32 in Dia, 1-3/8 in OAL, Countersink, Spiral Flute, 4-Flute, 1/4 in Dia S
D075-02570
- Drill, countersink and counterbore in one step
- Replacement tapered bits offered
- Replacement tapered bits offered
- Four-cutter countersink and tapered drill bit provide great speed and ideal finish
300-piece Combination Drill Set with Plastic Wall Plugs
TDC0300
300-piece Combination Drill Set with Plastic Wall Plugs
Vulcan 231591OR Jobber Drill Bit, 17/64 in Dia, 4-1/8 in OAL, 3-Flat Shank
V012-67905
- High speed steel with a 135 deg split point that eliminates the need for center punch and keeps drill from skating on hard surfaces
- Used to drill most ferrous and non ferrous metals
- Used to drill most ferrous and non ferrous metals
- All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck
Bosch Bulldog HC2312 Hammer Drill Bit, 3/16 in Dia, 6-1/2 in OAL, 4-Flute, 25/64 in Dia Shank, SDS P
B083-28085
- 15% faster compared to S4L in concrete
- Hex drive on bit fits into driver sleeve
- Hex drive on bit fits into driver sleeve
- For setting screws in concrete applications
Vulcan 263791OR Drill Bit, 1/4 in Dia, 6 in OAL, Spiral Flute, Straight Shank
V012-67992
- For drilling applications
- Positive tip geometry for best rotary drilling efficiency
- Positive tip geometry for best rotary drilling efficiency
- All sizes have 3 flats on the shank so that the chuck gets a better grip on the bit
- Wide spiral flutes efficiently remove dust and debris, from the cutting area
IRWIN 373212BX Hole Saw, 2-1/2 in Dia, 3/8 in Arbor, 4/6 TPI, HSS Cutting Edge
I008-00038
Bi-metal construction for toughness and long life
DeWALT DW1582 Spade Drill Bit, 1 in Dia, 6 in OAL, 1/4 in Dia Shank, Hex Shank
D075-47567
- Heavy-duty full length heat-treated shank provides maximum durability against bending and breaking
- Cutting spurs provide optimum hole finish
- Cutting spurs provide optimum hole finish
- 1/4 in hex shank prevents slipping and fits all 1/4 in quick-change systems
- Hang hole for easy storage
Diablo DHS2750CT GP Hole Saw, 2-3/4 in Dia, 2-3/8 in D Cutting, 3/8 in Arbor, Carbide Cutting Edge
D099-13780
For drill press, hand held drill
Bosch Daredevil DLSB1003 Spade Drill Bit, 3/8 in Dia, 16 in OAL, 1/4 in Dia Shank, Hex Shank
D032-38883
- Features a full-cone threaded tip for fast and effortless drilling
- Contoured paddle for fast chip removal
- Contoured paddle for fast chip removal
- Hex shank power groove to reduce slippage
- Spur and reamer tips for cleaner holes
IRWIN 1966938/42932 Forstner Bit, 2 in Dia, 3-1/2 in OAL, 3/8 in Dia Shank, Reduced Shank
I008-94370
Reduced shank fits 3/8 in and larger drills and drill presses
DeWALT DW1125 Jobber Drill Bit, 25/64 in Dia, 5-1/8 in OAL, Parabolic Flute, 25/64 in Dia Shank, Rou
D075-24873
- 135 deg split provides greater durability to reduce breaking
- Black oxide for greater wear resistance
- Black oxide for greater wear resistance
- Tapered web eliminates the frustration of bit spinning in the chuck
- Patented core diameter reduces breakage
Vulcan 941961OR Hole Saw, 2-1/8 in Dia, 3/4 in D Cutting, 3 in Arbor, HCS Cutting Edge, 3 in Pilot D
V012-94196
- High Carbon Steel Hole Saw
- 2-1/8 in
- 2-1/8 in
- Mandrel and pilot drill bit
- Mandrel and pilot drill bit
IRWIN 373312BX Hole Saw, 3-1/2 in Dia, 3/8 in Arbor, 4/6 TPI, HSS Cutting Edge
I008-00109
Bi-metal construction for toughness and long life
DeWALT DW1932 Drill Bit, 1/2 in Dia, 6 in OAL, Spiral Flute, 3-Flat Shank
D075-30240
- Pilot-Point tip starts on contact for clean, accurate holes and reduces lock-up on breakthrough
- Tapered web provides greater durability to reduce breaking
- Tapered web provides greater durability to reduce breaking
- No-spin shank eliminates the frustration of bit spinning in the chuck
- Size markings are located above the shank to prevent wearing away
DeWALT DWA5101 Drill Bit, 3/16 in Dia, 6 in OAL, 1/4 in Dia Shank, Hex Shank
D075-43637
- Innovative flute design leading to faster material removal for easier drilling
- Speed tip penetrates material quickly
- Speed tip penetrates material quickly
- 1/4 in hex shank for use in impact drivers
- For tap con installation and brick/block fastening
Vulcan 232051OR Jobber Drill Bit, 11/32 in Dia, 4-3/4 in OAL, 3-Flat Shank
V012-67910
- High speed steel with a 135 deg split point that eliminates the need for center punch and keeps drill from skating on hard surfaces
- Used to drill most ferrous and non ferrous metals
- Used to drill most ferrous and non ferrous metals
- All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck
Vulcan 218221OR Jobber Drill Bit, 5/64 in Dia, 2 in OAL, Straight Shank
V012-67938
- Super hard coating reduces friction and heat build up, resulting in extended tool life
- Surface drills cooler and lessens torque and downward drilling pressure
- Surface drills cooler and lessens torque and downward drilling pressure
- All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on t he bit
- All sizes 13/32 in and above have a 3/8 in reduced shank
Milwaukee 48-27-0195 Boring Bit, 1 in Dia, 16 in OAL, Flat Flute, 1/4 in Dia Shank, Hex Shank
M076-11983
- One-bit convenience provides added reach without set screw extensions
- Double-wing spurs allow for fast, clean hole cutting
- Double-wing spurs allow for fast, clean hole cutting
- Patented sharp cutting edge promotes easy wood boring, faster chip removal and reduced vibration
- 1/4 in quick-change hex shank can be used in all universal QUIK-LOK extensions
DeWALT DW1704 Drill Bit, 3/16 in Dia, 2-3/4 in OAL, Twist Flute, 3/16 in Dia Shank, Straight Shank
D075-46335
- Precise cutting edges to reduce splintering
- Brad point tip reduces walking
- Brad point tip reduces walking
- Engineered flutes for clean effective chip removal
- 3/4 to 1-3/8 in step increments of 1/16 in
DeWALT XR Series DCD800D2 Drill Driver Kit, Battery Included, 20 V, 2 Ah, 1/2 in Chuck, Keyless, Rat
D075-75480
- Access hard to reach work areas, compact 6.37 in size is 1/2 in shorter in length compared to the DCD791, tool head only
- High bit retention as you work with 1/2 in metal ratcheting chuck
- High bit retention as you work with 1/2 in metal ratcheting chuck
- Pro-level speed, control and precision, high-speed transmission with variable trigger and two-speed settings (0 to 650/0 to 2000 rpm)
- Brighten dark work areas, adjustable, three-position 70 Lumens LED with three-mode, including LED spotlight mode which features a 20 min shut-off function for extended work time in low-light spaces
Milwaukee 48-13-6000 Ship Auger Bit, 1 in Dia, 18 in OAL, Spiral Flute, 7/16 in Dia Shank, Hex Shank
M076-09285
- Impact-rated shank, strong enough to use with an impact wrench
- Fast chip removal, nonstick, polished and coated flutes eliminate costly cleaning time
- Fast chip removal, nonstick, polished and coated flutes eliminate costly cleaning time
- Versatile, one-line of MILWAUKEE auger bits covers all applications and tools
- For electricians, plumbers, utilities and any trade requiring fast hole drilling