Sort by
V012-67914
- All sizes 13/32 in and above have a 3/8 in reduced shank
- 135 deg split point eliminates the need for a center punch and keeps the drill from skating on hard materials
- 135 deg split point eliminates the need for a center punch and keeps the drill from skating on hard materials
- All sizes 13/32 in and above have a 3/8 in reduced shank
- 135 deg split point eliminates the need for a center punch and keeps the drill from skating on hard materials
V012-67908
- High speed steel with a 135 deg split point that eliminates the need for center punch and keeps drill from skating on hard surfaces
- All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck
- All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck
V012-67917
- Steel bit with split point that eliminates the need for a center punch and keeps from skating on hard materials
- Three flats on the shank for better grip on chuck
- Three flats on the shank for better grip on chuck
V012-67982
- For drilling high-bulk materials
- Positive tip geometry for best rotary drilling efficiency
- Positive tip geometry for best rotary drilling efficiency
- All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit
- Wide spiral flutes efficiently remove dust and debris, from the cutting area
V012-67998
- Positive tip geometry for best rotary drilling efficiency
- All sizes have 3 flats on the shank so that the chuck gets a better grip on the bit
- All sizes have 3 flats on the shank so that the chuck gets a better grip on the bit
- Wide spiral flutes efficiently remove dust and debris, from the cutting area
V012-68017
- Heat treated shaft resists bending under heavy loads
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
V012-68012
- Heat treated shaft resists bending under heavy loads
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
V012-67992
- For drilling applications
- Positive tip geometry for best rotary drilling efficiency
- Positive tip geometry for best rotary drilling efficiency
- All sizes have 3 flats on the shank so that the chuck gets a better grip on the bit
- Wide spiral flutes efficiently remove dust and debris, from the cutting area
V012-67978
- For drilling applications
- Negative carbide tip for rotary and percussion drilling
- Negative carbide tip for rotary and percussion drilling
- All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit
- Wide flutes quickly move out debris and dust
V012-68089
- Bi-Metal Hole Saw
- 1-1/16 in
- 1-1/16 in
- Built in arbor and pilot drill
- Built in arbor and pilot drill
V012-68090
- Bi-Metal Hole Saw
- 1-1/8 in
- 1-1/8 in
- Built in arbor and pilot drill
- Built in arbor and pilot drill
V012-68003
- Hexagonal shanks for sure grip in the chuck
- Sharp cutting lip and a wide single spiral flute designed to gives ample clearance for chip flow
- Sharp cutting lip and a wide single spiral flute designed to gives ample clearance for chip flow
- Center screw point starts hole and helps pull bits through material
V012-68005
- Hexagonal shanks for sure grip in the chuck
- Sharp cutting lip and a wide single spiral flute designed to gives ample clearance for chip flow
- Sharp cutting lip and a wide single spiral flute designed to gives ample clearance for chip flow
- Center screw point starts hole and helps pull bits through material
V012-68086
- Bi-Metal Hole Saw
- 3/4 in
- 3/4 in
- Built in arbor and pilot drill
- Built in arbor and pilot drill
V012-69264
- 3 in Length
- 1/4 in Dia
- 1/4 in Dia
- 1/4 in Dia
V012-96113
- Bi-Metal Hole Saw
- 1-7/8 in
- 1-7/8 in
- Built in arbor and pilot drill
- Built in arbor and pilot drill