Need More Help? 718-499-1119
Search
Power Grinders & Rotary
DREMEL 430 Sanding Drum, 60 Grit, Aluminum Oxide Abrasive
D032-00430
- Sanding bands are sold separately
- Sanding bands are easily replaceable on drums
- Sanding bands are easily replaceable on drums
- The drum mandrel holds a sanding band covered with aluminum oxide abrasive
- For rough shaping, smoothing wood, fiberglass, removing rust from metal surfaces and shaping rubber surfaces
DREMEL 438 Sanding Band, 1/2 in Dia Drum, 1/8 in Dia Shank, 120 Grit, Coarse, Aluminum Oxide Abrasiv
D032-00438
- Good for removing rust from metal surfaces
DREMEL 455 Grinding Stone, 7/32 in Dia, 1/8 in Arbor/Shank
D032-00455
- Precision ground abrasive stone for quick, easy sharpening of chain saw blades
- For quick easy sharpening of chain saw blades
- For quick easy sharpening of chain saw blades
DREMEL 480 Collet, Metal, For: #245, #250, Series 3 Engraver Rotary Hobby Tool
D032-00480
- The collet features small identification rings around its shank
- Rings correspond with the size of the collet, 1/8 in 0 rings, 3/32 in 3 rings, 1/16 in 2 rings and 1/32 in 1 ring
- Rings correspond with the size of the collet, 1/8 in 0 rings, 3/32 in 3 rings, 1/16 in 2 rings and 1/32 in 1 ring
- Collets are compatible with 225 flex-shaft attachment
DREMEL 482 Collet, Quick-Change, Metal, For: All Rotary Tools
D032-00482
- The collet features small identification rings around its shank
- Rings correspond with the size of the collet, 1/8 in 0 rings, 3/32 in 3 rings, 1/16 in 2 rings and 1/32 in 1 ring
- Rings correspond with the size of the collet, 1/8 in 0 rings, 3/32 in 3 rings, 1/16 in 2 rings and 1/32 in 1 ring
- Collets are compatible with 225 flex-shaft attachment
- Collets are compatible with 225 flex-shaft attachment
DREMEL 483 Collet, Metal, For: All Rotary Tools
D032-00483
- The collet features small identification rings around its shank
- Rings correspond with the size of the collet, 1/8 in 0 rings, 3/32 in 3 rings, 1/16 in 2 rings and 1/32 in 1 ring
- Rings correspond with the size of the collet, 1/8 in 0 rings, 3/32 in 3 rings, 1/16 in 2 rings and 1/32 in 1 ring
- Collets are compatible with 225 flex-shaft attachment
- Collets are compatible with 225 flex-shaft attachment
DREMEL 500 Abrasive Wheel, 1 in Dia, 1/8 in Arbor, Medium, Aluminum Oxide Abrasive
D032-00500
- High-quality industrial abrasive
- Works most for cleaning and rust removal
- Works most for cleaning and rust removal
- Ideal for sharpening, deburring, general-purpose and grinding
- For sharpening, de-burring, general-purpose and grinding
BIT DRILL DREMEL 7PC
D032-00628
- Set of seven high-speed drill bits
- Set of seven high-speed drill bits
- Made from high-grade steel to provide durability and a long bit life
DREMEL 654 Router Bit, 1/4 in Dia Cutter, 2-1/2 in OAL, 1/8 in Dia Shank, 1-Cutter, HSS
D032-00654
- Use in wood and other soft materials
- Use with Dremel model 230 and 330 router attachment
- Use with Dremel model 230 and 330 router attachment
- Also can be used with Model 335 plunge router attachment
DREMEL 652 Router Bit, 3/16 in Dia Cutter, 1/8 in Dia Shank, 1-Cutter, HSS
D032-00652
- For use in wood and other soft materials
- Head size is 3/16 in Dia
- Head size is 3/16 in Dia
- High speed steel for fast cuts
DREMEL 941 Grinding Stone, 5/8 in Dia, 1/8 in Arbor/Shank, Aluminum Oxide Abrasive
D032-00941
- Specially designed for working with conic surfaces
- A high-quality industrial abrasive made for extended general-purpose grinding
- A high-quality industrial abrasive made for extended general-purpose grinding
- For use on metals, castings, welded joints, rivets and rust
- For sharpening, deburring and general-purpose grinding on most materials including stainless steel
DREMEL 997 Grinding Stone, 1/8 in Dia, 1/8 in Arbor/Shank, Aluminum Oxide Abrasive
D032-00997
- Specially designed for working with conic surfaces
- A high-quality industrial abrasive made for extended general-purpose grinding
- A high-quality industrial abrasive made for extended general-purpose grinding
- Use on metals, castings, joints and rust
- For sharpening, deburring and general-purpose grinding on most materials including stainless steel
DREMEL 560 Cutting Bit, 1/8 in Dia, 1-1/2 in L, 1/8 in Dia Shank, HSS
D032-01061
- Gives you fast clean cuts in drywall
- Piloted tip to cut around outlet and switch boxes
- Piloted tip to cut around outlet and switch boxes
- For cutting drywall for electrical boxes, air vents other wall feature
DREMEL 504 Flap Wheel, 3/16 in Dia, 1/8 in Arbor, 80 Grit, Medium, Emery Cloth Abrasive
D032-01183
- Flapwheels grind and polish flat or contoured surfaces
- Effective as finishing sander after heavy-surface sanding and material removal is complete
- Effective as finishing sander after heavy-surface sanding and material removal is complete
- 80-grit for medium finish sanding
- For grinding and polishing applications
DREMEL 503 Flap Wheel, 3/8 in Dia, 1/8 in Arbor, 120 Grit, Fine, Emery Cloth Abrasive
D032-01182
- Flapwheels grind and polish flat or contoured surfaces
- Effective as finishing sander after heavy-surface sanding and material removal is complete
- Effective as finishing sander after heavy-surface sanding and material removal is complete
- 120-grit for fine finish sanding
- For grinding and polishing applications
DREMEL 569 Grout Removal Bit, 1/16 in Dia, 1-1/2 in L, 6 mm L Flute, 1/8 in Dia Shank, Steel
D032-01197
- Easily remove both wall and floor grout
- A high-speed cutter with a 1/8 in steel shank
- A high-speed cutter with a 1/8 in steel shank
- 30 deg angle for controlled cutting
- Guides 180 deg apart to keep bit centered
DREMEL 570 Grout Removal Bit, 1/8 in Dia, 1-1/2 in L, 10 mm L Flute, 1/8 in Dia Shank, Steel
D032-01225
- Easily remove both wall and floor grout
- A high-speed cutter with a 1/8 in steel shank
- A high-speed cutter with a 1/8 in steel shank
- 30 deg angle for controlled cutting
- Guides 180 deg apart to keep bit centered
DREMEL 516 Abrasive Point, 1/8 in Dia Shank
D032-01187
- Ideal for sharpening, deburring and general-purpose grinding on harder materials including stone, glass, ceramic, porcelain, gemstones and non-ferrous metals specially designed for working with conic and flat surfaces
- Use a sanding band or small piece of sandpaper to clean the surface of the abrasive point and restore its original shape
- Use a sanding band or small piece of sandpaper to clean the surface of the abrasive point and restore its original shape
- Can be used for paint and rust removal without removing any of the base metal
- For top results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down, this provides plenty of shank for the collet or chuck to hold onto the bit
DREMEL 545 Cutting Wheel, 22.2 mm Dia, 0.6 mm Thick, Diamond Abrasive
D032-01227
- Wheel is completely coated with fine diamond particles for working with hard materials
- Designed to last and not lose its shape or break, it provides smooth, fine cuts
- Designed to last and not lose its shape or break, it provides smooth, fine cuts
- For cutting, sawing and carving of hard materials
DREMEL 220-01 Drill Press, 2 in Drilling
D032-02262
- Articulating drill press drills perpendicular and angled holes in 15 deg increments, up to 90 deg horizontal
- Flex shaft tool stand allows telescopic adjustment between 16 in and 29 in height
- Flex shaft tool stand allows telescopic adjustment between 16 in and 29 in height
- Tool holder holds tool at 90 deg horizontal for tasks such as polishing metal objects, sanding different shapes and grinding metal pieces
- Crow's nest provides on-board storage for drill bits, wrenches and other Dremel accessories
DREMEL EZ686-01 Sanding/Grinding Accessory Set, 60/120/180/240 Grit
D032-01425
- EZ Lock mandrel and EZ Drum mandrel for faster accessory changes
- Reusable storage box
- Application and material usage information included
DREMEL 801-01 Carbide Shaping Wheel, 1-1/4 in Dia
D032-01795
- Powerful shaping wheel that quickly removes material
DREMEL 543 Cutting Wheel, 1-1/4 in Dia, 0.07 in Thick, Tungsten Carbide Abrasive
D032-02619
- Cuts 33% deeper than former cutting/shaping wheel up to 1/2 in
- Wheel coated with tungsten carbide grit for long life
- Wheel coated with tungsten carbide grit for long life
- Coated on both sides, so it cuts and finishes in one operation
- For cutting and shaping
Payment options
