Need More Help? 718-499-1119
Search
Power Tools
Vulcan 263791OR Drill Bit, 1/4 in Dia, 6 in OAL, Spiral Flute, Straight Shank
V012-67992
- For drilling applications
- Positive tip geometry for best rotary drilling efficiency
- Positive tip geometry for best rotary drilling efficiency
- All sizes have 3 flats on the shank so that the chuck gets a better grip on the bit
- Wide spiral flutes efficiently remove dust and debris, from the cutting area
Vulcan Masonry Drill Bit, 3/8 x 13 in
V012-67993
- Positive tip geometry for best rotary drilling efficiency
- All sizes have 3 flats on the shank so that the chuck gets a better grip on the bit
- All sizes have 3 flats on the shank so that the chuck gets a better grip on the bit
- Wide spiral flutes efficiently remove dust and debris, from the cutting area
Vulcan Masonry Drill Bit, 1/2 x 13 in
V012-67994
- Positive tip geometry for best rotary drilling efficiency
- All sizes have 3 flats on the shank so that the chuck gets a better grip on the bit
- All sizes have 3 flats on the shank so that the chuck gets a better grip on the bit
- Wide spiral flutes efficiently remove dust and debris, from the cutting area
Vulcan Masonry Drill Bit, 3/4 x 13 in
V012-67996
- Positive tip geometry for best rotary drilling efficiency
- All sizes have 3 flats on the shank so that the chuck gets a better grip on the bit
- All sizes have 3 flats on the shank so that the chuck gets a better grip on the bit
- Wide spiral flutes efficiently remove dust and debris, from the cutting area
Vulcan Masonry Drill Bit, 5/8 x 13 in
V012-67995
- Positive tip geometry for best rotary drilling efficiency
- All sizes have 3 flats on the shank so that the chuck gets a better grip on the bit
- All sizes have 3 flats on the shank so that the chuck gets a better grip on the bit
- Wide spiral flutes efficiently remove dust and debris, from the cutting area
Vulcan 272941OR Drill Bit, 5/16 in Dia, 6 in OAL, Spiral Flute, Straight Shank
V012-67997
- For drilling high-bulk materials
- Positive tip geometry for best rotary drilling efficiency
- Positive tip geometry for best rotary drilling efficiency
- All sizes have 3 flats on the shank so that the chuck gets a better grip on the bit
- Wide spiral flutes efficiently remove dust and debris, from the cutting area
Vulcan Masonry Bit, 5/32 x 4.5 in
V012-67998
- Positive tip geometry for best rotary drilling efficiency
- All sizes have 3 flats on the shank so that the chuck gets a better grip on the bit
- All sizes have 3 flats on the shank so that the chuck gets a better grip on the bit
- Wide spiral flutes efficiently remove dust and debris, from the cutting area
Vulcan 809850OR Rotary Drill Bit Set, Masonry, 5-Piece, Steel, Sandblasted
V012-67999
- Use for rotary drilling in cement, brick, cinder block and stone
- Premium carbide tips have positive tip angle geometry for rotary drilling
- Premium carbide tips have positive tip angle geometry for rotary drilling
- Sizes 3/16 in and larger have three flats on the shank for a secure grip in the drill chuck
- For rotary drilling
Vulcan 895240OR Drill Bit Set, Masonry, Percussion, 5-Piece, Steel, Sandblasted
V012-68000
- Premium carbide tips have negative tip angle geometry for rotary percussion drilling
- Sizes 3/16 in and larger have three flats on the shank for a secure grip in the drill chuck
- Sizes 3/16 in and larger have three flats on the shank for a secure grip in the drill chuck
- For Rotary Percussion Drilling
Vulcan Auger Bit, 1/2 in
V012-68002
- Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow
- Sharp cutting lip and a wide single spiral flute designed to gives ample clearance for chip flow
- Sharp cutting lip and a wide single spiral flute designed to gives ample clearance for chip flow
- Center screw point starts hole and helps pull bits through material
Vulcan Auger Bit, 3/8 in
V012-68001
- Hexagonal shanks for sure grip in the chuck
- Sharp cutting lip and a wide single spiral flute designed to gives ample clearance for chip flow
- Sharp cutting lip and a wide single spiral flute designed to gives ample clearance for chip flow
- Center screw point starts hole and helps pull bits through material
Vulcan Auger Bit, 5/8 in
V012-68003
- Hexagonal shanks for sure grip in the chuck
- Sharp cutting lip and a wide single spiral flute designed to gives ample clearance for chip flow
- Sharp cutting lip and a wide single spiral flute designed to gives ample clearance for chip flow
- Center screw point starts hole and helps pull bits through material
Vulcan Auger Bit, Hex Shank, Wood, 3/4 in
V012-68004
- Hexagonal shanks for sure grip in the chuck
- Sharp cutting lip and a wide single spiral flute designed to gives ample clearance for chip flow
- Sharp cutting lip and a wide single spiral flute designed to gives ample clearance for chip flow
- Center screw point starts hole and helps pull bits through material
Vulcan Auger Bit, 1 in
V012-68005
- Hexagonal shanks for sure grip in the chuck
- Sharp cutting lip and a wide single spiral flute designed to gives ample clearance for chip flow
- Sharp cutting lip and a wide single spiral flute designed to gives ample clearance for chip flow
- Center screw point starts hole and helps pull bits through material
Vulcan 277071OR Spade Drill Bit, 1/4 in Dia, Hex Shank
V012-68006
- Heat treated shaft resists bending under heavy loads
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
Vulcan 277661OR Spade Drill Bit, 9/16 in Dia, Hex Shank
V012-68009
- Heat treated shaft resists bending under heavy loads
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
Vulcan 277581OR Spade Drill Bit, 1/2 in Dia, Hex Shank
V012-68008
- Heat treated shaft resists bending under heavy loads
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
Vulcan 277231OR Spade Drill Bit, 3/8 in Dia, Hex Shank
V012-68007
- Heat treated shaft resists bending under heavy loads
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
Vulcan 277741OR Spade Drill Bit, 5/8 in Dia, Hex Shank
V012-68010
- Heat treated shaft resists bending under heavy loads
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
Vulcan 277901OR Spade Drill Bit, 3/4 in Dia, Hex Shank
V012-68011
- Heat treated shaft resists bending under heavy loads
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
Vulcan 278551OR Spade Drill Bit, 1-1/4 in Dia, Hex Shank
V012-68016
- Heat treated shaft resists bending under heavy loads
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
Vulcan 278121OR Spade Drill Bit, 7/8 in Dia, Hex Shank
V012-68012
- Heat treated shaft resists bending under heavy loads
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
Vulcan 278471OR Spade Drill Bit, 1-1/8 in Dia, Hex Shank
V012-68015
- Heat treated shaft resists bending under heavy loads
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
Vulcan Spade Bit, Wood, 15/16 in
V012-68013
- Heat treated shaft resists bending under heavy loads
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
- Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits
Payment options
