Need More Help? 718-499-1119
Search
Saw Blades
FEIN 63502118210 Saw Blade, 3 in, Carbide
F052-38949
- The economical alternative to diamond blades
- For cutting slots in plaster, porous concrete and similar construction materials and for cleaning and reworking planked deck joints
- For cutting slots in plaster, porous concrete and similar construction materials and for cleaning and reworking planked deck joints
- For removal of defective tile grout and working in corners and on edges without over cut
Milwaukee 48-00-1600 Reciprocating Saw Blade, 2-1/8 in W, 12 in L, 5 TPI, Diamond Cutting Edge
M076-25327
- Unique blade geometry protects against floor impacts during bottom plate cutouts
- Double-truss design guides blade for straight window cut outs
- Double-truss design guides blade for straight window cut outs
- Unique design protects against tooth fracture when cutting nails between studs and joists
- Fang tip delivers fast plunge cutting for window cutouts
Lenox 20582956R Reciprocating Saw Blade, 3/4 in W, 9 in L, 6 TPI
L055-20582
- High speed blasting along the cutting edge strengthens the blade to reduce breaks and increase durability
- Patented T2 technology reduces cutting force on each tooth and optimizes chip removal to allow efficient cutting in the widest range of materials
- Patented T2 technology reduces cutting force on each tooth and optimizes chip removal to allow efficient cutting in the widest range of materials
- Patented design for ultimate durability and speed when cutting clean wood or nail embedded wood
Milwaukee 48-00-1430 Reciprocating Saw Blade, 3/4 in W, 9 in L
M076-08200
- Tungsten carbide for long life
- Coarse grit for fast cutting
- Coarse grit for fast cutting
- For cutting stone, slate, clay pipe, brick, plaster, marble and chalkboard
Diablo DS1208CF Reciprocating Saw Blade, 1 in W, 12 in L, 8 TPI, Carbide Cutting Edge
D099-13143
- For construction, electrical, mechanical, metalworking, plumbing
DeWALT DWA161240 Circular Saw Blade, 6-1/2 in Dia, 5/8 in Arbor, 40-Teeth
D075-57444
- Exclusive, patent-pending ToughTrack tooth design for accurate tracking over the life of the blade
- High-density tungsten carbide for toughness, wear resistance and long life
- High-density tungsten carbide for toughness, wear resistance and long life
- Thin kerf design for smooth cuts
- Optimized for use on both corded and cordless circular saws
DIAMOND PRODUCTS 22785 Circular Saw Blade, 7 in Dia, 7/8 in Arbor, Applicable Materials: Concrete
D090-22785
- Basic quality diamond and economical cutting value
- For wet or dry cut
- For wet or dry cut
IRWIN MARATHON 24029 Circular Saw Blade, 6-1/2 in Dia, 5/8 in Arbor, 24-Teeth, Carbide Cutting Edge
I008-24029
- Ultra-thin kerf for more cuts per charge
- Face ground carbide teeth for fast, clean cuts
- Face ground carbide teeth for fast, clean cuts
- Aggressive hook angle for fast cuts
- Construction-grade carbide teeth for longer life
DeWALT ELITE Series DWAW61240 Circular Saw Blade, 6-1/2 in Dia, 5/8 in Arbor, 40-Teeth, Tungsten Car
D075-70465
- Long-lasting performance with up to 2X the life of Diablo
- Built for long life with multi-tooth design for aggressive cuts
- Built for long life with multi-tooth design for aggressive cuts
- Smooth, effortless cutting with large heat vents for cool cuts
- For rafer/compound cuts, demo beams/posts, subfloors, pine seeding and composite decking
Diablo DS1212BW5 Reciprocating Saw Blade, 12 in L, 6/12 TPI
D099-09925
- Perma-Shield coating protects the blade from heat, gumming and corrosion
- 1 in demolition body for straighter cuts with less vibration
- 1 in demolition body for straighter cuts with less vibration
- Ultra-hardened cutting edge for up to 5X longer life than standard blades
- A one-of-a-kind tip design enables faster and easier plunging
Milwaukee 48-00-1301 Reciprocating Saw Blade, 3/4 in W, 9 in L, 5 TPI
M076-08174
- Extra deep gullets easily remove chips for fast cutting
- Induction hardened teeth for long life
- Induction hardened teeth for long life
- Unique fleam ground teeth cut in both directions for clean cuts
BLADE SAW CIRC 40TPI 7-1/4IN
D075-57451
- Exclusive, patent-pending ToughTrack tooth design for accurate tracking over the life of the blade
- Exclusive, patent-pending ToughTrack tooth design for accurate tracking over the life of the blade
- High-density tungsten carbide for toughness, wear resistance and long life
- Thin kerf design for smooth cuts
- Optimized for use on both corded and cordless circular saws
Diablo DS0903CP3 Reciprocating Saw Blade, 9 in L, 3 TPI, Carbide Cutting Edge
D099-13838
- Carbide tipped cutting edge for Up to 50X cutting life versus standard pruning blades
- Ultimate cutting performance in clean wood and pruning applications
- Ultimate cutting performance in clean wood and pruning applications
- Aggressive carbide tooth geometry delivers fast and effortless cuts
- Large blade gullets between teeth provide fast chip removal
IRWIN 372960P5 Reciprocating Saw Blade, 9 in L, 10 TPI, Cobalt/Steel Cutting Edge
I008-00173
- Electronic beam weld for stronger, longer lasting teeth
- 8% cobalt keeps teeth sharp longer
- 8% cobalt keeps teeth sharp longer
- Bi-metal construction for durability and extra long life
- Precision set teeth for faster, smoother cuts
DeWALT ELITE Series DWAW71440 Circular Saw Blade, 7-1/4 in Dia, 5/8 in Arbor, 40-Teeth, Tungsten Car
D075-70470
- Long-lasting performance with up to 2X the life of Diablo
- Built for long life with multi-tooth design for aggressive cuts
- Built for long life with multi-tooth design for aggressive cuts
- Smooth, effortless cutting with large heat vents for cool cuts
- For rafer/compound cuts, demo beams/posts, subfloors, pine seeding and composite decking
Bosch T367XHM3 Jig Saw Blade, 0.35 in W, 5-1/4 in L, 5/7 TPI, Carbide Cutting Edge
B083-49390
- Carbide brazing technology delivers 10X life versus standard bi-metal blades in wood with nails and screws
- Heat-optimized manufacturing designed to resist heat buildup for heavy-duty cuts
- Heat-optimized manufacturing designed to resist heat buildup for heavy-duty cuts
- Progressor Technology increases speed and blade life through a combination of aggressive small teeth and larger teeth
- Unique tooth geometry helps to boost cutting speed by accentuating saw's pendulum movement
Diablo Demo Demon DS0705CWR3 Reciprocating Saw Blade, 7-3/8 in L, 5 TPI, Carbide Cutting Edge
D099-14812
- High-performance carbide cutting edge for greater durability and maximum cutting performance
- Strengthened blade body for scrolling and radius cutting applications
- Strengthened blade body for scrolling and radius cutting applications
- Optimized blade height for tight scrolling
- New tip design provides faster plunge capabilities
Milwaukee 48-00-5016 Reciprocating Saw Blade, 3/4 in W, 9 in L, 6 TPI, Bi-Metal Cutting Edge
M076-08263
- Deep gullet design cuts up to 25% faster than standard wood blades
- Fleam ground process creates super sharp teeth for clean cuts
- Fleam ground process creates super sharp teeth for clean cuts
- Matrix II bi-metal teeth for greater durability
- For cutting nails
DeWALT DW9152 Circular Saw Blade, 6-1/2 in Dia, 5/8 in Arbor, 36-Teeth, Carbide Cutting Edge
D075-31103
- Heavy-gauge laser-cut hardened and tempered steel plate is precision-balanced for accurate cuts
- Extra hard carbide ensures that cutting edges stay sharp
- Extra hard carbide ensures that cutting edges stay sharp
- Blade is laser-etched and color-coded by material
- For fast cutting applications
Payment options
