Screws
Simpson Strong-Tie EB-TY EB332WDR175 Hidden Deck Fastening System, #7 Thread, 2-1/4 in L, Stainless
S169-16891
- Easy to install for professional builders and DIYers
- Ideal for premium hardwoods
- Ideal for premium hardwoods
- Provides greater holding power and increased pullover resistance
- 3/16 in and 1/4 in spacing offer expansion compensation
Simpson Strong-Tie S07162FB1 Deck Screw, #7 Thread, 1-5/8 in L, Coarse Thread, Trim Head, Square Dri
S169-09041
- Trim-style head is less noticeable on the decking surface
- Type-17 point for fast starts
- Type-17 point for fast starts
- Coarse threads on approximately 2/3 of the shank draw the decking and other material tightly to the framing
- Predrilling recommended near board ends to prevent splitting
Simpson Strong-Tie S07225FB1 Deck Screw, #7 Thread, 2-1/4 in L, Coarse Thread, Trim Head, Square Dri
S169-09071
- Trim-style head is less noticeable on the decking surface
- Type-17 point for fast starts
- Type-17 point for fast starts
- Coarse threads on approximately 2/3 of the shank draw the decking and other material tightly to the framing
- Predrilling recommended near board ends to prevent splitting
Simpson Strong-Tie S07225FT1WH01 Deck Screw, #7 Thread, 2-1/4 in L, Coarse Thread, Trim Head, 6-Lobe
S169-87724
- Trim-style head is less noticeable on the decking surface
- Type 17 point for fast starts
- Type 17 point for fast starts
- Coarse threads on approximately 2/3 of the shank draw the decking and other material tightly to the framing
- Six-lobe drive helps prevent driver-bit cam-out, resulting in easier driving and longer bit life
Simpson Strong-Tie Strong-Drive WSV134S Subfloor Screw, #9 Thread, 1-3/4 in L, Ribbed Wafer Head, T2
S169-88051
- Redesigned tip and thread pattern provides easy starts and up to 25% less torque while driving and makes for up to 20% faster driving
- Less installation torque also means less wear on tools
- Less installation torque also means less wear on tools
- Deep 6-lobed recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs
- The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks
Simpson Strong-Tie T07225WPP Deck Screw, #7 Thread, 2-1/4 in L, Box Thread, Trim Head, 6-Lobe Drive,
S169-02250
- Unique "Box" thread design with raised-ridge technology greatly reduces driving torque, which allows you to drive more screws on a single battery charge
- Specially-designed sharp point penetrates hardwood products with ease
- Specially-designed sharp point penetrates hardwood products with ease
- 6 lobe drive helps prevent driver-bit cam-out, resulting in easier driving and longer bit life
- For use in decking, docks, boardwalks, finishing, millwork, trimming and seaside applications
Simpson Strong-Tie T07300WPP Deck Screw, #7 Thread, 3 in L, Box Thread, Trim Head, 6-Lobe Drive, Ste
S169-02251
- Unique "Box" thread design with raised-ridge technology greatly reduces driving torque, which allows you to drive more screws on a single battery charge
- Specially-designed sharp point penetrates hardwood products with ease
- Specially-designed sharp point penetrates hardwood products with ease
- 6 lobe drive helps prevent driver-bit cam-out, resulting in easier driving and longer bit life
- For use in decking, docks, boardwalks, finishing, millwork, trimming and seaside applications
Simpson Strong-Tie T10250DWP Deck Screw, #10 Thread, 2-1/2 in L, Box Thread, Flat Head, 6-Lobe Drive
S169-02283
- Unique "Box" thread design with raised-ridge technology greatly reduces driving torque, which allows you to drive more screws on a single battery charge
- Specially-designed sharp point penetrates hardwood products with ease
- Specially-designed sharp point penetrates hardwood products with ease
- 6 lobe drive helps prevent driver-bit cam-out, resulting in easier driving and longer bit life
- For use in decking, docks, boardwalks, finishing, millwork, trimming and seaside applications
Simpson Strong-Tie T10250WPP Deck Screw, #10 Thread, 2-1/2 in L, Box Thread, Flat Head, 6-Lobe Drive
S169-02245
- Unique "Box" thread design with raised-ridge technology greatly reduces driving torque, which allows you to drive more screws on a single battery charge
- Specially-designed sharp point penetrates hardwood products with ease
- Specially-designed sharp point penetrates hardwood products with ease
- 6 lobe drive helps prevent driver-bit cam-out, resulting in easier driving and longer bit life
Simpson Strong-Tie T10300DWP Deck Screw, #10 Thread, 3 in L, Box Thread, Flat Head, 6-Lobe Drive, St
S169-02284
- Unique "Box" thread design with raised-ridge technology greatly reduces driving torque, which allows you to drive more screws on a single battery charge
- Specially-designed sharp point penetrates hardwood products with ease
- Specially-designed sharp point penetrates hardwood products with ease
- 6 lobe drive helps prevent driver-bit cam-out, resulting in easier driving and longer bit life
Simpson Strong-Tie WSV2S/WSNTL2LS Deck Screw, #8 Thread, 2 in L, Flat Head, #3 Drive, 300 Stainless
S169-03927
- Eliminates subfloor nail squeaking and costly call backs
- Variety of lengths to cover subfloor, wall plates and stair treads
- Variety of lengths to cover subfloor, wall plates and stair treads
- Minimum fastener penetration of 1-1/4 in into framing member is required
- For subfloor and sheathing to wood and ewp-ply fastening for multi-ply trusses
Teks 21308 Screw, #8 Thread, 1/2 in L, Coarse Thread, Hex Drive, Self-Drilling, Self-Tapping Point,
I076-21308
- Drive surface and recess reduces cam-outs to prevent slipping during installation
- Drill points self-drills through light to heavy gauge metal with ease
- Drill points self-drills through light to heavy gauge metal with ease
- Corrosion-resistant finish protects the job's appearance with long-lasting coating
- Self-tapping threads taps their own threads to provide less effort when fastening into metal
Teks 21316 Screw, #8 Thread, 1 in L, Coarse Thread, Hexagonal Head, Hex Drive, Self Drill Point, Ste
T072-21316
- Drive surface and recess reduces cam-outs to prevent slipping during installation
- Drill points self-drills through light to heavy gauge metal with ease
- Drill points self-drills through light to heavy gauge metal with ease
- Corrosion-resistant finish protects the job's appearance with long-lasting coating
- Self-tapping threads taps their own threads to provide less effort when fastening into metal
Teks 21320 Screw, #10 Thread, 3/4 in L, High-Low Thread, Hex Drive, Self-Tapping, Sharp, Type 3 Poin
I076-21320
- Drive surface and recess reduces cam-outs to prevent slipping during installation
- Drill points self-drills through light to heavy gauge metal with ease
- Drill points self-drills through light to heavy gauge metal with ease
- Corrosion-resistant finish protects the job's appearance with long-lasting coating
- Self-tapping threads taps their own threads to provide less effort when fastening into metal
Teks 21328 Screw, #10 Thread, 1 in L, Coarse Thread, Hexagonal Head, Hex Drive, Self Drill Point, St
I076-21328
- Drive surface and recess reduces cam-outs to prevent slipping during installation
- Drill points self-drills through light to heavy gauge metal with ease
- Drill points self-drills through light to heavy gauge metal with ease
- Corrosion-resistant finish protects the job's appearance with long-lasting coating
- Self-tapping threads taps their own threads to provide less effort when fastening into metal
Teks 21332 Screw, #10 Thread, 1-1/2 in L, Coarse Thread, Hex Drive, Self-Drilling, Self-Tapping Poin
T072-21332
- Drive surface and recess reduces cam-outs to prevent slipping during installation
- Drill points self-drills through light to heavy gauge metal with ease
- Drill points self-drills through light to heavy gauge metal with ease
- Corrosion-resistant finish protects the job's appearance with long-lasting coating
- Self-tapping threads taps their own threads to provide less effort when fastening into metal
Teks 21341 Screw, #12 Thread, 1 in L, Hex Drive, Self-Drilling, Self-Tapping Point, Steel, Zinc, 400
T072-21341
- Drive surface and recess reduces cam-outs to prevent slipping during installation
- Drill points self-drills through light to heavy gauge metal with ease
- Drill points self-drills through light to heavy gauge metal with ease
- Corrosion-resistant finish protects the job's appearance with long-lasting coating
- Self-tapping threads taps their own threads to provide less effort when fastening into metal
Teks 21344 Screw, #12 Thread, 1-1/2 in L, Coarse Thread, Hex Drive, Self-Drilling, Self-Tapping Poin
I076-21344
- Drive surface and recess reduces cam-outs to prevent slipping during installation
- Drill points self-drills through light to heavy gauge metal with ease
- Drill points self-drills through light to heavy gauge metal with ease
- Corrosion-resistant finish protects the job's appearance with long-lasting coating
- Self-tapping threads taps their own threads to provide less effort when fastening into metal
Teks 21352 Screw, #14 Thread, 1-1/2 in L, Coarse Thread, Hexagonal Head, Hex Drive, Self Drill Point
I076-21352
- Drive surface and recess reduces cam-outs to prevent slipping during installation
- Drill points self-drills through light to heavy gauge metal with ease
- Drill points self-drills through light to heavy gauge metal with ease
- Corrosion-resistant finish protects the job's appearance with long-lasting coating
- Self-tapping threads taps their own threads to provide less effort when fastening into metal
Teks 21356 Screw, #14 Thread, 2-1/2 in L, Coarse Thread, Hex Drive, Self-Drilling, Self-Tapping Poin
I076-21356
- Drive surface and recess reduces cam-outs to prevent slipping during installation
- Drill points self-drills through light to heavy gauge metal with ease
- Drill points self-drills through light to heavy gauge metal with ease
- Corrosion-resistant finish protects the job's appearance with long-lasting coating
- Self-tapping threads taps their own threads to provide less effort when fastening into metal
Teks 21358 Screw, #14 Thread, 2-1/2 in L, Hexagonal Head, Hex Drive, Self Drill Point, Steel, Zinc
I041-21358
- Drive surface and recess reduces cam-outs to prevent slipping during installation
- Drill points self-drills through light to heavy gauge metal with ease
- Drill points self-drills through light to heavy gauge metal with ease
- Corrosion-resistant finish protects the job's appearance with long-lasting coating
- Self-tapping threads taps their own threads to provide less effort when fastening into metal
Teks 21360 Screw, #8 Thread, 1/2 in L, Coarse Thread, Pan Head, Phillips Drive, Self-Drilling, Self-
I076-21360
- Drive surface and recess reduces cam-outs to prevent slipping during installation
- Drill points self-drills through light to heavy gauge metal with ease
- Drill points self-drills through light to heavy gauge metal with ease
- Corrosion-resistant finish protects the job's appearance with long-lasting coating
- Self-tapping threads taps their own threads to provide less effort when fastening into metal
Teks 21372 Screw, #10 Thread, 3/4 in L, Coarse Thread, Pan Head, Phillips Drive, Self-Drilling, Self
T072-21372
- Drive surface and recess reduces cam-outs to prevent slipping during installation
- Drill points self-drills through light to heavy gauge metal with ease
- Drill points self-drills through light to heavy gauge metal with ease
- Corrosion-resistant finish protects the job's appearance with long-lasting coating
- Self-tapping threads taps their own threads to provide less effort when fastening into metal
