Wiss branded products | Plastic Express Inc.

Auto-Retracting Safety Utility Knife, 7 in L, Black Oxide, Gray/Red

W006-30133

IN STOCK NOW : 0

Ships in 2-3 DAYS : 0

Blade retracts automatically the moment it loses contact with the material being cut even if the user is still holding the blade slider forward in the 'open position
Helps reduce workplace injuries, lowering lost time and increasing productivity
Accepts all standard type utility knife blades
Quick and easy blade change
Includes three black coated blades

Crescent 193610CVSMNN Fence Tool Plier, 11 AWG Cutting Capacity, 10-7/16 in OAL, 1-1/16 in L Jaw, 3-

W006-32987

IN STOCK NOW : 1

Ships in 2-3 DAYS : 329

Two-staple grips in nose
Corrugated hammer head, heavy prong, easily reach, pull rusty staples
Corrugated hammer head, heavy prong, easily reach, pull rusty staples
Special opening in head allows both wire and staple to be gripped
Two-electronically induction hardened durable wire cutters

Crescent ATWJ26VS Adjustable Wrench, 6 in OAL, 15/16 in Jaw, Alloy Steel, Black Phosphate

W006-32806

IN STOCK NOW : 76

Ships in 2-3 DAYS : 45

Each wrench meets the ASME performance requirements for the next size up
Micro-serrations on the jaws provide a tighter grip on the fastener thus helping to generate 4x more torque than traditional adjustable wrenches
Micro-serrations on the jaws provide a tighter grip on the fastener thus helping to generate 4x more torque than traditional adjustable wrenches
Laser etched scale in both SAE and metric sizes allows easy fastener size identification
Larger knurl provides a tighter jaw fit, is easier to adjust and is less likely to bind up

Crescent ATWJ28VS Adjustable Wrench, 8 in OAL, 1-1/8 in Jaw, Alloy Steel, Black Phosphate

W006-32804

IN STOCK NOW : 46

Ships in 2-3 DAYS : 41

Each wrench meets the ASME performance requirements for the next size up
Micro-serrations on the jaws provide a tighter grip on the fastener thus helping to generate 4x more torque than traditional adjustable wrenches
Micro-serrations on the jaws provide a tighter grip on the fastener thus helping to generate 4x more torque than traditional adjustable wrenches
Laser etched scale in both SAE and metric sizes allows easy fastener size identification
Larger knurl provides a tighter jaw fit, is easier to adjust and is less likely to bind up

Crescent C6NVN/C6NV Long Nose Locking Plier, 6 in OAL, 2-1/4 in Jaw Opening, Non-Slip Grip Handle

C643-29606

IN STOCK NOW : 0

Angled tooth pattern for better grip
Nickel-plated finish resists corrosion
Nickel-plated finish resists corrosion
Compound action for powerful non-slip locking grip
Long nose with wire cutter gets to hard-to-reach spots

Crescent Cee Tee H26VN/H26V Slip Joint Plier, 6-1/2 in OAL, 1 in Jaw Opening, Knurled Handle

A123-22796

IN STOCK NOW : 48

Ships in 2-3 DAYS : 334

Designed for gripping and turning round objects such as pipes, rods and pins
Curved jaws combination with machined gripping teeth and wire cutter
Curved jaws combination with machined gripping teeth and wire cutter
Forged from alloy steel and accurately machined, hardened and tempered
Non-slip knurled handle grips

Crescent CODE RED DB16 Pry Bar, 16 in L, Nail Puller Slots Tip, Steel, Black, 5-13/32 in W

A123-25788

IN STOCK NOW : 13

Ships in 2-3 DAYS : 30

Adjustable jaws slide and clamp to fit onto objects for straightening and prying
Striking hammer head surface for striking
Striking hammer head surface for striking
Large claw on head that adjusts for leverage in pulling nails

Crescent CODE RED DB18X Pry Bar, 18 in L, Flat End, Nail Slot Tip, Steel, Black, 4-1/8 in W

W006-25786

IN STOCK NOW : 26

Ships in 2-3 DAYS : 37

Head indexes over 180 deg and locks in 16 positions
Head has raised striking surface that allows for striking to loosen and penetrate
Head has raised striking surface that allows for striking to loosen and penetrate
Angles head with nail slot for prying and pulling nails and boards
Durable two-tone grip provides comfort, control and safety

Crescent CODE RED FB13 Pry Bar, 13 in L, Nail Slots Tip, Steel, Red, 3-1/4 in W

A123-25781

IN STOCK NOW : 56

Ships in 2-3 DAYS : 175

Precision ground ends for nail pulling with less material damage
Nail slot in end and center for access to pulling nails
Nail slot in end and center for access to pulling nails
Durable high-visibility red finish is corrosion-resistant
Radius end design adds strength and provides better prying leverage

Crescent CPTAW8 Adjustable Wrench and Spline Socket Set, 1 in Jaw, Steel, Black Phosphate

W006-28355

IN STOCK NOW : 34

Ships in 2-3 DAYS : 55

Versatile fastening tool offers user multiple fastening options in a single tool design
Traditional 8 in adjustable wrench with laser-etched SAE/MM scales and wide jaw opening
Traditional 8 in adjustable wrench with laser-etched SAE/MM scales and wide jaw opening
Pass-thru reversible ratcheting system works over long threaded rod where normal ratchets and sockets won't fit
Every pass-thru socket replaces one standard and one deep

Crescent Pro Series PS6549C Nose Plier, 9 in OAL, Blue/Gray Handle, Co-Molded Grip Handle, 1-9/32 in

C643-21682

IN STOCK NOW : 12

Ships in 2-3 DAYS : 72

Co-molded grips for added comfort
Increase cutting pressure by 50%
Increase cutting pressure by 50%
Chrome vanadium steel for increased durability
Heat-treated joint rivet for smooth and consistent operation

Crescent Wiss A10N Tinner Snip, 11 in OAL, 2-1/2 in L Cut, Curved, Straight Cut, Steel Blade, Red Ha

A123-21389

IN STOCK NOW : 0

Ships in 2-3 DAYS : 0

Cuts straight and wide curves, when trimming light gauge stock
Blades individually hand edged for maximum cutting efficiency
Flat face guides tool along straight line
Blades of finest quality steel hot drop forged for sharp edge, long life
Rust-resistant blades

Crescent Wiss CW5T Electrician's Data Shear, 6 in OAL, Ergonomic, Soft Textured Grip Handle, TPR Han

A123-33323

IN STOCK NOW : 13

Ships in 2-3 DAYS : 33

Integrated wire strippers in scissor blade for quick and easy stripping of 19 and 23 AWG wires
Serrated outside edges of blades for reaming knockouts and conduit
Serrated outside edges of blades for reaming knockouts and conduit
Grip zone area for tightening wire nuts and crimping low voltage connections
Precision ground blades feature durable serrations on the bottom blade that grip material for better control and cleaner cuts

Crescent Wiss CW7T Heavy-Duty Tradesman Utility Shear, 7-1/2 in OAL, 2 in L Cut, Stainless Steel Bla

W006-33324

IN STOCK NOW : 141

Ships in 2-3 DAYS : 68

Heavy-duty blades feature premium-grade stainless steel and are precision engineered for knife like cutting edges
Compact 7-1/2 in design allows for easy storage and provides excellent portability
Compact 7-1/2 in design allows for easy storage and provides excellent portability
Titanium coated blades provide corrosion resistance and are 3X harder than steel for durability and tool life
Quick-release ergonomic latch provides consistent easy operation and secures the tool in the closed and locked position for safe storage

Crescent Wiss M1P Aviation Snip, 9-3/4 in OAL, 1-3/8 in L Cut, Left, Straight Cut, Ergonomic Handle,

W006-34593

IN STOCK NOW : 0

Ships in 2-3 DAYS : 0

Single-handed latch operation for left or right-handed use
Free float design on the pivot bolt provides longer life
Free float design on the pivot bolt provides longer life
Ergonomic, two shot material non-slip handle grips provide excellent control and easy cleaning with built-in hang hole for convenient storage
Cuts left from tight curves to straight

Crescent Wiss M2P Aviation Snip, 9-3/4 in OAL, 1-3/8 in L Cut, Right, Straight Cut, Ergonomic Handle

W006-34594

IN STOCK NOW : 0

Ships in 2-3 DAYS : 0

Single-handed latch operation for left or right-handed use
Free float design on the pivot bolt provides longer life
Free float design on the pivot bolt provides longer life
Ergonomic, two shot material non-slip handle grips provide excellent control and easy cleaning with built-in hang hole for convenient storage
Cuts right from tight curves to straight

Crescent Wiss M2R Aviation Snip, 9-3/4 in OAL, Right Cut, Molybdenum Steel Blade, Contour-Grip Handl

W006-58018

IN STOCK NOW : 518

Ships in 2-3 DAYS : 639

Right cut, cuts right from tight curves to straight
Cuts low carbon cold-rolled steel
Cuts low carbon cold-rolled steel
Non-slip serrated jaw of tough molybdenum steel holds material firmly and uniformly spreads cutting force across blade edge
Withstands strain of cutting heavy stock

Crescent Wiss M300N Utility Snip, 10-1/2 in OAL, Straight Cut, Steel Blade, Non-Slip Grip Handle, Or

W006-30790

IN STOCK NOW : 0

Ships in 2-3 DAYS : 176

Combines long cut of tinner's snips with the strength of compound action
Compound action multiplies the cutting force
Compound action multiplies the cutting force
Non-slip, textured grips and safety latch for excellent control
For making long, fast cuts in sheet metal, aluminum and more

Crescent Wiss M3P Aviation Snip, 9-3/4 in OAL, 1-1/2 in L Cut, Left, Right, Straight Cut, Ergonomic

W006-34595

IN STOCK NOW : 0

Ships in 2-3 DAYS : 1

Single-handed latch operation for left or right-handed use
Free float design on the pivot bolt provides longer life
Free float design on the pivot bolt provides longer life
Ergonomic, two shot material non-slip handle grips provide excellent control and easy cleaning with built-in hang hole for convenient storage
Cuts straight and slight left and right curves

Crescent Wiss M6R Aviation Snip, 9-1/4 in OAL, Straight Cut, Molybdenum Steel Blade, Non-Slip Grip H

W006-58337

IN STOCK NOW : 398

Ships in 2-3 DAYS : 744

Cuts left and straight
Offset blades keep hands clear of metal
Offset blades keep hands clear of metal
Non-slip serrated jaw of molybdenum steel for compound lever action
Withstands strain of cutting heavy stock and tight curves

Wiss

Payment options