Need More Help? 718-499-1119
Search
Work Wear & Safety Equipment
MSA 10083064 Safety Glasses, Anti-Fog Lens, Matte Black Frame
M028-00570
- Dual lens impact protection
- Anti-fog, Tuff-Stuff anti-scratch coatings keep lenses clean and clear
- Anti-fog, Tuff-Stuff anti-scratch coatings keep lenses clean and clear
- Panto/retroscopic tilt and sliding horizontal length adjustment offers a custom and secure fit
- Filters 99.999% of UV
SAFETY WORKS SWX00260 Ear Muff, 23 dB NRR, AM, FM Radio Band, Black
M028-00623
- Listen to music hands-free after pairing these ear muffs to another Bluetooth device
- Digital Bluetooth MP3/AM/FM stereo ear muffs offers a noise reduction rating (NRR) of 23 dB, helping prevent hearing damage
- Digital Bluetooth MP3/AM/FM stereo ear muffs offers a noise reduction rating (NRR) of 23 dB, helping prevent hearing damage
- Allows up to 10 AM and 10 FM preset stations to help allow you to listen to your favorite stations
- Soft headband and ear cup seal material for comfort during extended wear
V-Gard Protective Hat, Fas-Trac III, Ratchet, Full Brim, Slotted, Red
M028-00791
- Comfortable, lightweight protection
- Self adjusting crown straps
- Polyethylene shell provides superior impact protection
- Sturdy polyethylene shell and suspension system work together as a protection system
V-Gard Protective Hats, Fas-Trac Ratchet, Hat, Gray
M028-00790
- Comfortable, lightweight protection
- Self adjusting crown straps
- Polyethylene shell provides superior impact protection
- Sturdy polyethylene shell and suspension system work together as a protection system
MSA 10083083 Safety Glasses, Anti-Fog Lens, Metal Blue/Gray Frame
M028-00573
- Dual lens impact protection
- Anti-fog, Tuff-Stuff anti-scratch coatings keep lenses clean and clear
- Anti-fog, Tuff-Stuff anti-scratch coatings keep lenses clean and clear
- Panto/retroscopic tilt and sliding horizontal length adjustment offers a custom and secure fit
- Filters 99.999% of UV
Skullgard Protective Caps and Hats, Fas-Trac Ratchet, Cap, White
M028-00805
- Offer outstanding protection in hot, dangerous industries
- Tested to radiant heat loads producing temperatures up to, but not exceeding, 350F
- Smooth crown for easy use of MSA welding equipment
- Heavy duty construction
V-Gard Full Brim Hard Hats, 4 Point, Cap, Orange
M028-00881
- Polyethylene shell provides superior impact protection
- Self-adjusting crown straps ensure a comfortable fit
V-Gard Protective Hats, Fas-Trac Ratchet, Slotted Cap, Orange
M028-00922
- Comfortable, lightweight protection
- Self adjusting crown straps
- Polyethylene shell provides superior impact protection
- Sturdy polyethylene shell and suspension system work together as a protection system
MSA SWX00347 Hard Hat, 4-Point Textile Suspension, HDPE Shell, Yellow, Class: E
M028-00957
- High-density polyethylene (HDPE) shell designed for high strength
- Four-point suspension with 3D height adjustment
- Four-point suspension with 3D height adjustment
- Wheel ratchet is easy-to-use and creates a firm comfortable fit
- Premium moisture managing sweatband
Advantage 200 LS Facepiece, Medium, Single Neckstrap
M028-01119
- Lightweight, cost-efficient
- Thermoplastic rubber increases softness and decreases weight
- AnthroCurve conforms to each user's unique facial characteristics
MSA SWX00359 Hard Hat, 4-Point Textile Suspension, HDPE Shell, Yellow, Class: E
M028-01151
- High-density polyethylene (HDPE) shell designed for high strength
- Extended back brim helps protect neck and ears from the suns UV rays, as well as a run-off for rain and snow
- Extended back brim helps protect neck and ears from the suns UV rays, as well as a run-off for rain and snow
- Four-point suspension with 3D height adjustment
- Wheel ratchet is easy-to-use and creates a firm comfortable fit
V-Gard Protective Hats, Fas-Trac Ratchet, Hat, Hi-Viz Orange
M028-01238
- Comfortable, lightweight protection
- Self adjusting crown straps
- Polyethylene shell provides superior impact protection
- Sturdy polyethylene shell and suspension system work together as a protection system
Skullgard Replacement Suspension, Cap or Hard Hat, Staz-On, Gray
M028-02415
- Four-point suspension system helps keep helmet in place
- Provides superior comfort and a semi-custom fit
- Features high-quality sweatband and nylon height adjusters
- Easily clips into V-Gard hat or cap shell
Skullgard Replacement Suspension, Hard Hat, Standard, Gray
M028-02418
- Four-point suspension system helps keep helmet in place
- Provides superior comfort and a semi-custom fit
- Features high-quality sweatband and nylon height adjusters
- Easily clips into V-Gard hat or cap shell
V-Gard Visor Frame for General Purposes, For All MSA Slotted Caps, Black/Green, Debris Control Sold
M028-02562
- Stowable slot adaptors secure frame tightly in slotted MSA caps, and allow frame to work with or without earmuffs
- Sliding adjustment blade sallow visor to work with most half-mask respirators and other PPE worn under a visor
- Patent-pending V-shaped alignment guides and three touchpoint load for easy visor installation
- Sloped design allows material to easily slide off the frame
- Heavy-duty, flat rubber strap allows easy and secure placement of frame on the cap
V-Gard Accessory System Universal Visor Frame, Black, Standard, 11 in L x 3-1/4 H
M028-02564
- Sloped design allows material to easily slide off the frame
- Features a heavy-duty, flat, rubber strap can be used with slotted and non-slotted MSA helmets
- Perfect compatibility with many half-mask respirators
V-Gard Accessory System Chin Protectors, 8.68 in x 3.82 in
M028-02580
- Ensures safety and standards compliance with clear, tinted, shaded and coated V-Gard Visors
- For use with V-Gard Nitrometer Visors ONLY
V-Gard Accessory System General Purpose Visor, Anti-Fog, Anti-Scratch, Clear, 18 in L x 10-3/8 in H
M028-02601
- Suitable for most applications where impact hazards exist
- Provides maximum UV protection
- Wider design for improved resistance to impact and splash hazards
- Shape accommodates cap-mounted earmuffs
V-Gard Visor Frame for General Purposes, For All MSA Slotted Caps, Black/Green, Includes Debris Cont
M028-03298
- Stowable slot adaptors secure frame tightly in slotted MSA caps, and allow frame to work with or without earmuffs
- Sliding adjustment blade sallow visor to work with most half-mask respirators and other PPE worn under a visor
- Compatible with many half-mask respirators
- Sliding adjustment blades
- Non-metal construction for use in electrical applications
MSA 10121816 Earmuff, 24 dB NRR
M028-03342
- Digital MP3/AM/FM stereo ear muffs offers a NRR of 24 dB, helping prevent hearing damage
- Includes 8 AM and FM presettable stations for your favorite stations
- Includes 8 AM and FM presettable stations for your favorite stations
Instant-Release Attachment, for Slotted Caps and Welding Shields, Black
M028-03388
- Allows welding shields to be attached and detached quickly from headwear equipped with instant-release lugs
- Designed for use with MSA instant-release caps
Skullgard Protective Caps and Hats, Fas-Trac Ratchet, Cap, Welders' Lugs Attached, Natural Tan
M028-03389
- Offer outstanding protection in hot, dangerous industries
- Tested to radiant heat loads producing temperatures up to, but not exceeding, 350F
- Smooth crown for easy use of MSA welding equipment
- Heavy duty construction
Freedom Series V-Gard Helmet, Fas-Trac Ratchet, Cap, American Eagle
M028-03620
- Industrial-strength head protection that's lightweight yet durable
- Featuring Fas-Trac III Suspension and slots for better impact resistance and personal comfort
SoundControl SH Cap Earmuff, 25 dB NRR, Gray/Black, Cap-Mounted
M028-03979
- Spring design offers low pressure and a high level of comfort
- Three distinct wearing positions for ease of use
- Excellent grip makes it easy to adjust the cups, even when wearing gloves
- Provides maximum space for the ears inside the cup
- Soft ear cup material for extended wear
Payment options
