General
General branded products
26-Leaf 3" Feeler Gage .0015" To .025
G005-31311
- Knurled locking nut
- Each leaf is etched with both decimals of an inch and corresponding millimeter sizes
9 pc Ratchet Offset Screwdriver Set
G005-80075
- Ratchet driver steel plated switch instantly adjusts for right and left hand use
- Ratcheting Offset Screwdriver Set is ideal for use where screws are concealed or obstructed, leverage is required, or turning space is limited
Digital/Fraction Electronic Calipers,0- 6 in/150 mm, Stainless Steel
G005-01470
- Large, easy-to-read LCD numbers
- On/Off and zero button
- Pocket clip
GENERAC GP 7677 Portable Generator, 30 A, 120 V, Oil, 3.7 gal Tank, 10.5 hr Run Time, Recoil Start
G086-07457
- PowerRush advanced technology delivers over 40% more starting capacity allowing you to do more with less
- Generac's durable OHV engine with splash lubrication provides a long engine life
- Generac's durable OHV engine with splash lubrication provides a long engine life
- Large capacity steel fuel tank with incorporated fuel gauge provides durability and up to a 10.5 hr run time at 50% load
- Hardened 1-1/4 in steel tube cradle for added durability and strength
GENERAC GP 7680 Portable Generator, 54.2/27.1 A, 120/240 V, Oil, 6.9 gal Tank, 10.5 hr Run Time, Rec
G005-08579
- Large capacity steel fuel tank with incorporated fuel gauge provides durability and up to a 10.5 hr run time at 50% load
- Hardened 1-1/4 in steel tube cradle for added durability and strength
- Hardened 1-1/4 in steel tube cradle for added durability and strength
- Hour meter tracks maintenance intervals
- Heavy-duty, never flat wheels allow for easy portability
GENERAC GP 7683 Portable Generator, 54.2/27.1 A, 120/240 V, Gas, 6.9 gal Tank, 10.5 hr Run Time, Rec
G005-08502
- Large capacity steel fuel tank with incorporated fuel gauge provides durability and up to a 10.5 hr run time at 50% load
- Hardened 1-1/4 in steel tube cradle for added durability and strength
- Hardened 1-1/4 in steel tube cradle for added durability and strength
- Hour meter tracks maintenance intervals
- Heavy-duty, never flat wheels allow for easy portability
GENERAL 1261-0 Grommet Kit, Brass
G005-41103
- Contains brass-plated steel grommets with hole cutter and hardwood backer block, hardened mandrel and anvil
- Setting tool has knurled body for greater comfort and safety
- Setting tool has knurled body for greater comfort and safety
- Setting tool and anvil are coded with lines for each individual size grommet
- For repairing awnings, canvas, lawn furniture, pool covers, sailcloth, tarpaulins and tents
GENERAL 1261-2 Grommet Refill, Brass
G005-41104
- Contains brass-plated steel grommets with hole cutter and hardwood backer block, hardened mandrel and anvil
- Setting tool has knurled body for greater comfort and safety
- Setting tool has knurled body for greater comfort and safety
- Setting tool and anvil are coded with lines for each individual size grommet
- general tools 3/8 in grommet kit
GENERAL 1266 Snap Fastener Refill, Solid Brass, Nickel
G005-41107
- For repairing awnings, canvas, lawn furniture, pool covers, sailcloth, tarpaulins and tents
GENERAL 1267 Screw Snap Fastener Kit, Nickel
G005-41108
- 2-Piece setting tool with knurled body
- 2-Piece setting tool with knurled body
GENERAL 130 Reamer, 0.125 to 0.5 in Capacity, Steel Blade
G005-13003
- Enlarges holes ideal for when a drill could cause cracking in material
- Luthier/guitar tool enlarges bridge pin holes, headstocks, holes for tuners and volume/tone knobs
- Luthier/guitar tool enlarges bridge pin holes, headstocks, holes for tuners and volume/tone knobs
- T-handle provides leverage for easier reaming with greater control and easier turning
- Removes burrs from wood, cut pipe, tubing and conduit as well as inside deburring edge tool with capacity of 1/8 to 1/2 in
GENERAL 189 Drain Plier, 4 in Jaw Opening, 3-Position Slip Joint Jaw, Textured Handle
G005-18900
- Replaces a jaw wrench, slip nut wrench and a combination wrench
- 3-position slip joint expands jaw opening to up to 4 in
- 3-position slip joint expands jaw opening to up to 4 in
- Works on plastic and metal drain systems
- Removable rubber jaw covers protect plated nuts and pipes from damage
GENERAL 29 Angle Protractor with Locknut, 0 to 165 deg, Plastic
G005-22148
- Four-piece sturdy design with brass lock nut
- using this plastic protractor, you can transfer odd angles to your miter saw
- using this plastic protractor, you can transfer odd angles to your miter saw
- Fine black graduations from 0 to 180 deg in opposite directions
- Protractor/angle finder is ideal for construction jobs, cabinet making and fine carpentry, where a standard protractor or T-bevel will not fit
GENERAL 321 Stem Thermometer, 0 to 220 deg F, Analog Display
G005-22391
- Magnifying lens
- Stainless steel probe
- Stainless steel probe
- For making quick contact temperature readings
GENERAL 36/37 Precision Drill Guide, Aluminum
G005-23059
- Built-in protractor, drills accurate right-angled or variable-angled holes with the built-in protractor scale
- Adjustable- adjusts from 0 to 45 deg in 5 deg increments in either direction of vertical drill position
- Adjustable- adjusts from 0 to 45 deg in 5 deg increments in either direction of vertical drill position
- Built-in depth positive stop for accurate drill depth
- V-groove for positioning round stock, pipe or tubing, while a slide lock facilitates sanding as well as buffing
GENERAL 4 Circle Cutter, 7/8 to 4 in Dia Cutting, Steel
G005-21003
- Durable body of heat-treated tool steel
- Adjustable to various diameters by the included hex wrench
- Adjustable to various diameters by the included hex wrench
- Only safe to use with drill press running at less than 500 rpm
GENERAL 452-6 Caliper, 0 to 6-5/16 in, 1/8, 1/16, 1/32, 1/64 in Graduation, 6-5/16 in Jaw, Steel
G005-31618
- Legs made of special caliper steel, with hardened measurement points
- Hardened and tempered bow springs and fulcrum spools assure uniform tension without side play
- Hardened and tempered bow springs and fulcrum spools assure uniform tension without side play
- Adjusting screw's self-seating washer and nut enable quick and positive adjustment
- For transferring measurements of round stock or oddly shaped pieces
GENERAL 557 Inspection Mirror, Round Mirror, 2-1/4 in Dia Mirror, Glass Mirror, 15 in OAL
G005-42468
- Mirror enclosed in plated holder is attached to knurled handle by ball and socket joint
- Non-slip cushioned grip
- Non-slip cushioned grip
- Mirror is replaceable
GENERAL 690 Mini Screwdriver Set, Steel
G005-22200
- Patented, ergonomically designed handle for rotation, greater comfort and control
- Plated alloy steel blades ensure a long life
- Plated alloy steel blades ensure a long life
- Hardened tips and shafts ensure a maximum workload
- Three different blade configurations with color-coded large swivel heads