Need More Help? 718-499-1119
Search
General
General branded products
GENERAL 73 Punch Plier, 0.81 in OAL, Steel Body
G005-02208
- Novel compound-joint design requires less effort than other hole punches
- Spring tension, self-opening revolving punch
- Spring tension, self-opening revolving punch
- Cushioned grip handle for improved comfort
GENERAL 744 Mini Pocket Screwdriver
G005-74401
- Pocket clip and end caps
- Two double-ended chrome vanadium blades are held in a reversible carrier that fits snugly in the handle
- Two double-ended chrome vanadium blades are held in a reversible carrier that fits snugly in the handle
- Change blade sizes instantly
- For mechanics, technicians, hobbyists
GENERAL 744DB Mini Pocket Screwdriver
G005-74400
- Pocket clip and end caps
- Two double-ended chrome vanadium blades are held in a reversible carrier that fits snugly in the handle
- Two double-ended chrome vanadium blades are held in a reversible carrier that fits snugly in the handle
- Removable, individual blades
- For mechanics, technicians, hobbyists
GENERAL 79 Center Punch, 1/2 in Tip, 4-7/8 in L, Steel
G005-31072
- General's automatic center punches offer a precise way to punch center holes for drilling in layout work
- One-handed spring impact operation, no hammer needed
- One-handed spring impact operation, no hammer needed
- Spring tension adjusts for light or heavy markings
- Punch depth can be set for repetitive work
GENERAL 790-5 Hex Plumb Bob, Steel, Nickel
G005-42612
- Made of hexagonal, rust-resistant nickel-plated steel
- Self-centering cap simplifies cord replacement
- Self-centering cap simplifies cord replacement
- Self-centering cap simplifies cord replacement
GENERAL 800-8 Plumb Bob, Solid Brass, Lacquered
G005-42624
- Made of machined, fully polished and lacquered solid brass
- Preferred by masonry, carpentry and surveying professionals
- Preferred by masonry, carpentry and surveying professionals
- Self-centering cap simplifies cord replacement
- Replaceable hardened steel point (#800NP)
GENERAL 8071 Ratcheting Offset Screwdriver Set with Pass Through Handle, 4 in Drive
G005-42673
- Rotation of the plated-steel drive can be reversed instantly and adjusted for left- or right-handed use
- Blades are made of hardened, tempered steel
- Blades are made of hardened, tempered steel
GENERAL 81264 Grommet Tool Kit
G005-02190
- Contains grommets with hole cutter and hardwood backer block, hardened mandrel and anvil
- Setting tool has knurled body for greater comfort and safety
- Setting tool has knurled body for greater comfort and safety
- Setting tool and anvil are coded with lines for each individual size grommet
GENERAL 837 Contour Gauge with Pins, 6 in L, 3-1/2 in W, SAE Graduation, Stainless Steel
G005-24116
- Allows you to duplicate a profile exactly for hobby woodworking, precise woodworking or tile flooring/linoleum installation where you want to replicate the shape of moldings, cut outs around door casings and pipes
- Record the cross-sectional shape of a surface
- Record the cross-sectional shape of a surface
- Measure profiles up to 3-1/2 in deep
- Rule markings with inch graduations are on the tough and durable plastic body of the gauge
GENERAL 840 Pro Doweling Kit, 3/16 to 1/2 in Clamping, Aluminum
G005-24120
- Steel stops adjust the depth of the cut
- Revolving sintered turret accommodates six drill bit sizes
- Revolving sintered turret accommodates six drill bit sizes
GENERAL 842 Pencil Compass, 9 in Dia Circle, Metal
G005-24126
- Carpenter-quality, made of durable die-cast rustproof metal
- Adjustable spring tension
- Adjustable spring tension
- Scribe guide for edge marking
GENERAL 843/1 Pencil Compass and Scriber, 8 in Dia Circle, Steel
G005-24132
- Hardened steel pin in brass-plated frame improves rigidity
- Positive wing nut adjustment
- Positive wing nut adjustment
- Positive wing nut adjustment
GENERAL 88 Scriber/Etching Pen, Straight Tip, Tungsten Carbide Tip, 5-5/16 in OAL, Knurled Handle
G005-31112
- Screw chuck for reversing point when not in use
- Aluminum handle with knurled finger grip
- Aluminum handle with knurled finger grip
- Replaceable point (#88P)
- For mark and scribe ceramic, glass and steel
GENERAL 88CM Scriber/Etching Pen with Magnet, Straight Tip, Tungsten Carbide Tip, 5-7/16 in OAL, Knu
G005-31116
- Permanent magnet picks up small parts and retrieves steel chips from hard-to-reach places
- Screw chuck for reversing point when not in use
- Screw chuck for reversing point when not in use
- Aluminum handle with knurled finger grip
- Replaceable point (#88P)
GENERAL 95618 Hobby Knife Set
G005-02201
- Rounded handle fits snugly in palm for added leverage for cutting thicker materials
- Handle design imparts maximum comfort and ease
- Handle design imparts maximum comfort and ease
- Heavy-duty locking screw chuck holds blades securely in place
- For art, craft and hobby projects such as precise matt board cutting, model building, decals and stencils, balsa crafts, templates, scrapbooks, jewelry and photographic work, wherever precision cutting is required
GENERAL E-Z Pro 849 Pocket Hole Jig Kit
G005-000051
- Heavy-duty aluminum extrusion and hardened steel drill bushings
- Portable, but can be bench mounted
- Portable, but can be bench mounted
- Bit is replaceable (#32)
- Bit is replaceable (#32)
GENERAL IRTC50 Infrared Thermometer with Tricolor Light Panel, -40 to 428 deg F, 0.1 deg Resolution,
G005-01442
- In scanning mode, the color of the light panel (red, green or blue) and the beeper speed (fast, silent or slow) indicate whether the target is above, within or below the reference temperature +/- the setpoint bandwidth
- Choice of three setpoint bandwidths 1, 5 and 10 deg F (0.5, 3, 5.5 deg C)
- Choice of three setpoint bandwidths 1, 5 and 10 deg F (0.5, 3, 5.5 deg C)
- Squeezing and holding the trigger captures a reference temperature and launches scan mode
- Unique star burst laser targeting system helps to approximate the target/spot size
GENERAL Jiffy 806 Self-center Punch, 3/8 in Tip, 2-1/2 in L, Steel
G005-24018
- Countersunk end ensures starting hole is centered in hardware screw hole
- Centering punch is ideal for quickly starting screw holes when attaching countersunk hardware
- Centering punch is ideal for quickly starting screw holes when attaching countersunk hardware
- Feature; Nickel Plated Steel, Knurled Body
GENERAL MM1E Moisture Meter, 7 to 15% WME Low, 16 to 35% WME High, 0.1 % Accuracy, LED Display
G005-10188
- Separate Hi/Low measurement scales
- 10 LED display
- 10 LED display
- A protective cap doubles as a calibration checker
- For woodworking, building construction, facility maintenance, home inspection, lumber selection and water damage restoration
GENERAL MMD4E Moisture Meter, 5 to 50% Wood, 1.5 to 33% Building Materials, 0.1 % Accuracy, LCD Disp
G005-41447
- Wood/building materials selection switch
- Low, medium and high moisture tones and on-screen icons
- Low, medium and high moisture tones and on-screen icons
- Reading HOLD button
- The pin cap doubles as a calibration checker
Payment options
