Need More Help? 718-499-1119
Search
Klein Tools
Klein Tools branded products
D27 Diagonal Cutting Pliers, Flush Cutter, Lightweight, 5-Inch
K004-72080
- Pliers' pinch cutting greatly reduces cutting effort and minimizes fly-off
- Grips designed for greater tool control
- Ultra slim profile increases access in confined areas
- Made in USA
- Heat treated for increased durability
D30 Pliers, Curved Needle Nose Pliers, 6-1/2-Inch
K004-71062
- Knurled jaws for sure wrapping and looping
- Curved handles provide greater tool control
- Forged in the USA with custom, US-made tool steel for maximum durability
- Hot-riveted joint for smooth action and no handle wobble
- Always wear approved eye protection.
D32 Electronics Pliers, Needle Nose with Curved Chain-Nose, 5-Inch
K004-71242
- Easily bends and forms fine wire
- Polished inside jaws and radiused jaw edges prevent nicking wire
- Curved handles provide greater tool control and spring-loaded for self-opening action
- Forged in the USA with custom, US-made tool steel for maximum durability
- Hot-riveted joint for smooth action and no wobble handle
D32 Electronics Pliers, Slim Needle Nose, Spring-Loaded, 5-Inch
K004-71246
- Knurled jaws for sure wrapping and looping
- Curved handles provide greater tool control
- Spring-loaded for self-opening action
- Forged in the USA with custom, US-made tool steel
- Always wear approved eye protection.
D50 Classic Klaw Pump Pliers, 10-Inch
K004-73046
- Compact, narrow design for easy work in small or hard to reach spaces
- Gripping surface with more specially hardened teeth for reduced wear and positive grip
- Extended grips for added comfort
- Always wear approved eye protection.
- NOT insulated. Plastic-dipped or slip-on plastic handles are NOT intended for protection against electrical shock.
D50 Classic Klaw Pump Pliers, 7-Inch
K004-73045
- Compact, narrow design for easy work in small or hard to reach spaces
- Gripping surface with more specially hardened teeth for reduced wear and positive grip
- Extended grips for added comfort
- Features a wider jaw opening
- Always wear approved eye protection.
ET2 AC/DC Voltage/Continuity Tester
K004-69037
- Backlit LCD display
- CAT IV 600V modern solid-state design for safety
- Tests GFCI protected circuits
- Uses standard replaceable multimeter test leads
- Features built-in test lead holders on back of meter
ET3 Digital Circuit Breaker Finder with GFCI Outlet Tester
K004-69240
- GFCI tester consists of two parts: a Transmitter connected to the electrical outlet or fixture, and a Receiver used to scan the panel to locate the correct breaker
- Receiver delivers clear visual and audible indications when the correct breaker has been located
- Operates on 90-120V AC circuits
- Transmitter incorporates a GFCI outlet tester to inspect the wiring condition at the electrical outlet and test GFCI devices
- Transmitter docks in the Receiver for convenient storage as a single item when tester is not is use
ET4 AC/DC Voltage Tester
K004-69184
- Tests DC voltages from 32V to 330V at four levels
- Built-in test lead holder on back of tester holds the leads in one of two positions: one so that they are spaced correctly to test tamper-resistant US-style outlets and the other for convenient storage of the test leads
- Test leads can be docked in the holder for convenient storage
- Batteries not required; tester is powered by the applied voltage
- Built to withstand a 9.8-Foot (3 m) drop
G70 Lightweight Threadclip, Plastic Handle, 4-5/8-Inch
K004-76056
- Scissors have comfortable molded plastic body
- Sharp points
- Durable enough to stand up to the demands of professionals that use them everyday
J10 Journeyman Crimping and Cutting Tool
K004-74001
- Crimper features tapered nose design for working in confined spaces
- Contoured thumb area for additional comfort and positive feel and specially hardened cutter in the nose
- Hot-riveted joint ensures smooth action and no handle wobble
- Made in USA
- Dual material Journeyman handles provide a better grip without sacrificing tool strength or durability
J20 Lineman's Pliers, 9-Inch, Journeyman Handle
K004-72102
- High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs
- Induction hardened cutting knives for long life
- Hot-riveted joint ensures smooth action and no handle wobble
- Made in USA with Custom, US-made tool steel
- Streamlined design with sure-gripping, cross-hatched knurled jaws
J20 Lineman's Pliers, Fish Tape Pulling, 9-Inch
K004-72106
- Cuts ACSR, screws, nails, and most hardened wire
- Induction-hardened cutting knives for long life
- Hot-riveted joint ensures smooth action and no handle wobble
- Made in USA with Custom, US-made tool steel
- Streamlined design with sure-gripping, cross-hatched knurled jaws
J20 Pliers, Needle Nose Side-Cutters, 8-Inch
K004-72111
- Extended handles provide added reach and leverage
- Slim head design for working in confined areas
- Induction hardened cutting knives for long life
- Forged in the USA with custom, US-made tool steel
- Hot-riveted joint ensures smooth action and no handle wobble
J21 9-Inch Journeyman Pliers Side Cutting
K004-72101
- Hot-riveted joint ensures smooth action and no handle wobble
- Induction hardened cutting knives for long life
- Streamlined design with sure-gripping, cross-hatched knurled jaws
- Made in USA with Custom, US-made tool steel
- Unique handle tempering helps absorb the ''snap'' when cutting wire
J63 Journeyman Cable Cutter
K004-72113
- Precision, one-hand shearing action and cable-gripping shear-type jaws
- Perfect for working in confined spaces
- Made in USA
- Beveled jaw tips provide proper mating and shearing action, which protects leading jaw edges
- Can be carried in most tools pouches
K12 Klein-Kurve Heavy-Duty Wire Stripper 8-20 AWG
K004-34335
- Large knurled plier tip pulls and twists wire
- Shear cutting knives for easier cutting of copper wire and larger material such as Romex cable (all sizes) and other nonmetallic (type NM) sheathed cable
- Screw shearing for 6-32 and 8-32 screws and wire looping hole
- Made in USA
- Klein-Kurve comfort grip handles for reduced hand fatigue
K14 Klein-Kurve Dual NM Cable Stripper/Cutter
K004-14124
- Strips, cuts and loops 12-14 AWG solid and 14-16 AWG stranded wire
- New lock design prevents accidental locking and loosening over time
- Precision shear-type blades for square, clean cuts on solid copper wire
- Made in USA
- Narrow, strong-gripping, serrated nose for easy bending, shaping and pulling of wire in tight places
MM3 Digital Multimeter, Manual-Ranging, 600V
K004-69019
- Voltage tester for batteries, diodes and continuity
- Built to withstand a 3.3-foot (1m) drop and withstand daily wear and tear on the job site
- For use in basic and controlled electromagnetic environments such as residential, business and light-industrial locations
- CAT III 600V safety rating
- Low battery indicator and easily accessible battery compartment
NCV Non-Contact Voltage Tester Pen, 50 to 1000V AC
K004-69370
- Volt Pen with high intensity, bright green LED indicates the tester is powered on
- When voltage is detected, a high intensity, bright red LED illuminates and an audible tone will sound
- 50 to 1000 VAC power operating range allows broad application
- Auto power-off feature conserves and extends battery life
- CAT IV 1000V safety rating
Payment options
