Search
Need More Help? 718-499-1119
Klein Tools
Klein Tools branded products
1841 products found.
158 Klein Kurve Skinning Knife
K004-44043
IN STOCK NOW : 0 |
- Ergonomic handle for maximum comfort
- Oversized ring for strength and easy storage
- Notch on blade back for scraping or removing wire insulation
- Made in USA
- Always wear approved eye protection.
160 Haven's Cable Grip 0.25-Inch Capacity
K004-47202
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Works with Messenger and Guy Strand cable diameter range of 0.06-Inch to 0.25-Inch (1.52 mm - 6.35 mm)
- Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable area
- Maximum safe load of 2,500 lbs (1,134 kg)
- Made in USA
- Approximate weight of each is 1-pound
160 Haven's Cable Grip 0.5-Inch Capacity
K004-47203
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Works with Messenger and Guy Strand cable diameter range of 0.125 to 0.500-Inch (3.18 to 12.70 mm)
- Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable area
- Maximum safe load of 5000-Pound (2268 kg)
- Made in USA
- Individually hand inspected and actuated for proper function
160 Haven's Grip with Swing Latch
K004-47204
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Works with Messenger and Guy Strand cable diameter range of 0.125 to 0.500-Inch (3.18 to 12.70 mm)
- Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable area
- Swing latch helps hold cable in the jaw; maximum safe load is 5000-Pound (2268 kg)
- Made in USA
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
161 Chicago Grip for Bare Copper Wire
K004-47191
IN STOCK NOW : 0 |
- Locking loop handles allow the jaws to be held in an open position for easy placement on wire or cable
- Single ''V'' groove jaw contour
- Hot latch version available (Cat. No. 1613-35H)
- Made in USA
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
161 Chicago Grip for Bare Wire
K004-47012
IN STOCK NOW : 0 |
- Works within 0.08 to 0.20-Inch (2.0 to 5.1 mm) cable diameter range
- Single ''V'' groove jaw with 3-Inch jaw length
- Max Safe Load of 1500-Pound (680 kg)
- Made in USA
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
161 Chicago Grip for Weatherproof Wire
K004-47009
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Round inside jaw contour for weatherproof coated wire
- Notches in jaw provide firm grip on insulation
- Max Safe Load of 8000-Pound (3629 kg)
- Made in USA
- NOTE: Due to various types of weatherproof coatings available, selection of proper grips is determined by outside diameter of cable
161 Chicago Grip Hot Latch for Copper Wire
K004-47192
IN STOCK NOW : 0 |
- Single ''V'' groove jaw
- Max Safe Load of 4500-Pound (2100 kg)
- Locking loop handles allow the jaws to be held in an open position for easy placement on wire or cable
- Made in USA
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
161 Chicago Grip with Latch 0.37'' Cable
K004-47016
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Designed for cable sizes from 0.12 to 0.37-Inch (3.05 to 9.40 mm) with maximum safe load of 4500-Pound (2041 kg)
- Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
- Sawtooth profile provides extra gripping power
- Made in USA
- For larger conductors, see our grips with round inside-jaw contour
161 Grip for High Strength Cables 0.37''
K004-47015
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Designed for cable sizes from 0.12 to 0.37-Inch (3.05 to 9.40 mm) and has max safe load of 4500-Pound (2041 kg)
- Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
- Sawtooth profile provides extra gripping power
- Made in USA
- For larger conductors, see our grips with round inside-jaw contour
161 Grip for Weatherproof Wire 0.40-Inch Capacity
K004-47000
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Notches in jaw provide firm grip on insulation
- Manufactured from drop-forged, heat-treated steel for excellent durability
- Made in USA
- NOTE: Due to various types of weatherproof coatings available, selection of proper grips is determined by outside diameter of cable
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
161 Grip for Weatherproof Wire 0.53-Inch Capacity
K004-47003
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Notches in jaw provide firm grip on insulation
- Max Safe Load of 4500-Pound (2041 kg)
- Manufactured from drop-forged, heat-treated steel for excellent durability
- Made in USA
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
161 Grip for Weatherproof Wire 0.74-Inch Capacity
K004-47006
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Round inside jaw contour for weatherproof coated wire
- Notches in jaw provide firm grip on insulation
- Manufactured from drop-forged, heat-treated steel for excellent durability
- Made in USA
- NOTE: Due to various types of weatherproof coatings available, selection of proper grips is determined by outside diameter of cable
162 Chicago Grip - Dual Conductor Trans
K004-47050
IN STOCK NOW : 0 |
- Machined upper and lower jaws eliminate scoring or damage to second conductor by contouring to second conductor
- Round jaws shaped to provide maximum contact with circumference of cable and prevent cable deformation
- Supplied with spring and locking loop handles, allows jaws to be held in open position for easier placement on cable
- Grips maintain temporary tension until the wire or cable can be permanently terminated
- Orders must specify exact outside diameter of cables, circular mills with strand combination, or manufacturer's code
162 Chicago Grip Bell-System Type H Grip
K004-47027
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Equipped with chain, toggle and shackle
- Outside diameter of support wire includes thickness of polyethylene coating
- For support wire 0.134 and larger, refer to 1659 series
- Made in USA
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
162 Chicago Grip for Conductors 20k Lb Load
K004-47040
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- These grips are special order only, please allow 30 days for delivery, not returnable
- Orders must specify exact outside diameter of cables, circular mills with strand combination, or manufacturer's code
- Manufactured from drop-forged, heat-treated steel for excellent durability
- Made in USA
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
162 Chicago Grip for Conductors 25k Lb Load
K004-47051
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- These grips are special order only. Please allow 30 days for delivery. These are not returnable.
- Orders must specify exact outside diameter of cables, circular mills with strand combination, or manufacturer's code.
- Manufactured from drop-forged, heat-treated steel for excellent durability
- Made in USA
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
162 Chicago Grip for Large Diameter Conductors
K004-47029
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Round jaws provide maximum contact with the cable minimizing deformation
- These non-returnable grips are special order only. Please allow 30 days for delivery.
- Orders must specify exact outside diameter of cables, circular mills with strand combination, or manufacturer's code
- Made in USA
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
162 Chicago Grip, 0.75 to 1-Inch High Strength Cables
K004-47035
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Designed for 0.75 to 1.0-Inch (19.05 to 25.4 mm) diameter cable sizes with max load of 15,000-Pound (6803 kg)
- For larger conductors, see our grips with round inside-jaw contour
- Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
- Made in USA
- Locking handle keeps jaw open while grip is placed on cable with a hot stick
162 Grip for High Strength Cables 0.5 to 0.75-Inch
K004-47032
IN STOCK NOW : 0 |
Ships in 2-3 DAYS : 0 |
- Designed for 0.50 to 0.75-Inch (12.7 to 19.05 mm) diameter cable sizes with max safe load of 15,000-Pound (6803 kg)
- Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
- For larger conductors, see our grips with round inside-jaw contour
- Made in USA
- Locking handle keeps jaw open while grip is placed on cable with a hot stick
Payment options
Back to Top