Plumbing Hoses & Tubes
WAYNE 57028-001 Check Valve Kit, 1-1/4 in, NPT, Thermoplastic Body
W075-10395
- Durable thermoplastic valve body and poppet
- Designed to resist corrosion and to stop noise
- Designed to resist corrosion and to stop noise
- Same as 57027-001 plus inline installation kit
- Lightweight construction
WAYNE CWS50 Jet Well Pump, 120/240 V, 0.5 hp, 1-1/4 in Suction, 3/4 in Discharge Connection, 90 ft M
W075-21880
- Dual voltage (120/240 V) high efficiency square flange motor (factory set for 240 V)
- Pressure switch is pre-set at 30-50 psi for automatic operation
- Pressure switch is pre-set at 30-50 psi for automatic operation
- Durable cast iron volute with dedicated priming port for volute filling
- For wells 0 - 90 ft in depth
WAYNE PC1 Transfer Pump, 14 A, 12 V, 0.125 hp, 3/4 in Outlet, 300 gph, Aluminum
W075-20619
- Convenient, powerful, lightweight and portable transfer pump for household use
- Corrosion-resistant chrome-plated bronze volute with 3/4 in hose fitting
- Corrosion-resistant chrome-plated bronze volute with 3/4 in hose fitting
- Removes water down to 1/8 in of surface when water suction attachment is connected
WAYNE PC2 Transfer Pump, 2 A, 115 V, 0.1 hp, 3/4 in Outlet, 300 gph, Metal
W075-20620
- Convenient, powerful, lightweight and portable transfer pump for household use
- Corrosion-resistant chrome-plated bronze volute with 3/4 in hose fitting
- Corrosion-resistant chrome-plated bronze volute with 3/4 in hose fitting
- Removes water down to 1/8 in of surface when water suction attachment is connected
WAYNE PC4 Utility Pump, 1-Phase, 8 A, 120 V, 0.5 hp, 3/4 in Outlet, 1600 gph, Thermoplastic Impeller
W075-10058
- Generates up to 50 psi at outlet hose; generates up to 15 ft of suction lift at inlet hose
- Rugged, cast iron pump and motor housing
- Rugged, cast iron pump and motor housing
- 3/4 in garden hose adapters at inlet and discharge
- Removing water from flooded basements, draining hot water heaters, flushing water lines, charging polyglycol radiant heating lines
WAYNE RPP50/SEL50 Sewage Pump, 1-Phase, 15 A, 115 V, 0.5 hp, 2 in Outlet, 20 ft Max Head, 10,000 gph
W075-20755
- Durable, cast iron submersible sewage pump
- Ideal for basement or below grade installations
- Ideal for basement or below grade installations
- Will replace most sewage pumps without any plumbing changes
- Piggy-back tether float switch for automatic or manual operation
WAYNE RUP160 Utility Pump, 1-Phase, 2.5 A, 120 V, 0.166 hp, 1-1/4 in Outlet, 3100 gph, Thermoplastic
W075-20735
- Maximum flow rate is 3000 gph and 1850 gph at 10 ft of discharge lift
- High flow rate, oil-free pump removes water down to 3/8 in. Of surface
- High flow rate, oil-free pump removes water down to 3/8 in. Of surface
- Corrosion-resistant reinforced thermoplastic housing, volute, and impeller
- 1-1/4 in discharge with 3/4 in garden hose adapter
WAYNE SWS50-8.5FX Jet Pump, 120/240 V, 0.5 hp, 1-1/4 in Suction, 3/4 in Discharge Connection, 25 ft
W075-20355
- Dual voltage (120/240 V) high efficiency square flange motor (factory set for 240 V)
- Pressure switch pre-wired with 30-50 psi pressure setting
- Pressure switch pre-wired with 30-50 psi pressure setting
- Durable cast iron volute with dedicated priming port for volute filling
- For wells 0 - 25 ft in depth
WAYNE WCS50T Sewage Pump, 1-Phase, 15 A, 120 V, 0.5 hp, 2 in Outlet, 15 ft Max Head, 10,000 gph, Iro
W075-21600
- Durable, cast iron submersible sewage pump
- 2 in NPT discharge capable of handling up to 2 in solids
- 2 in NPT discharge capable of handling up to 2 in solids
- Piggy-back tether float switch for automatic or manual operation
- Ideal for basement or below grade installations
Zep ZHCR64NG6 Clog Remover, Liquid, Light Yellow, Slight Chlorine, 64 oz Package, Bottle
Z007-52206
- Designed to quickly dissolve hair and grease clogging drains
- Commercial-strength gel pours through standing water
- Commercial-strength gel pours through standing water
- Safe for all pipes and septic systems
- Ideal for bathroom sinks, tubs and shower drains
