Dremel
Dremel branded products
DREMEL 543 Cutting Wheel, 1-1/4 in Dia, 0.07 in Thick, Tungsten Carbide Abrasive
D032-02619
- Cuts 33% deeper than former cutting/shaping wheel up to 1/2 in
- Wheel coated with tungsten carbide grit for long life
- Wheel coated with tungsten carbide grit for long life
- Coated on both sides, so it cuts and finishes in one operation
- For cutting and shaping
DREMEL 545 Cutting Wheel, 22.2 mm Dia, 0.6 mm Thick, Diamond Abrasive
D032-01227
- Wheel is completely coated with fine diamond particles for working with hard materials
- Designed to last and not lose its shape or break, it provides smooth, fine cuts
- Designed to last and not lose its shape or break, it provides smooth, fine cuts
- For cutting, sawing and carving of hard materials
DREMEL 560 Cutting Bit, 1/8 in Dia, 1-1/2 in L, 1/8 in Dia Shank, HSS
D032-01061
- Gives you fast clean cuts in drywall
- Piloted tip to cut around outlet and switch boxes
- Piloted tip to cut around outlet and switch boxes
- For cutting drywall for electrical boxes, air vents other wall feature
DREMEL 561 Cutting Bit, 1/8 in Dia, 1-1/2 in L, 1/8 in Dia Shank, HSS
D032-601063
- For multi-purpose cutting
DREMEL 562 Cutting Bit, 1/8 in Dia, 1-1/2 in L, 1/8 in Dia Shank, HSS, 8 -Flute
D032-01064
- Great for contractors
- High-speed cutter mounted on a 1/8 in steel shank
- High-speed cutter mounted on a 1/8 in steel shank
- Start at a 45 deg angle when cutting into a piece of material
- For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collect or chuck to hold onto the bit
DREMEL 565 Cutting Kit, Multi-Purpose, Plastic/Steel, Black
D032-01062
- Depth adjustment quickly sets correct cutting depth up to 3/4 in
- Easy screw-on mounting to rotary tool
- Easy screw-on mounting to rotary tool
- Large window provides excellent visibility for better control
- Control cuts in a variety of materials
DREMEL 569 Grout Removal Bit, 1/16 in Dia, 1-1/2 in L, 6 mm L Flute, 1/8 in Dia Shank, Steel
D032-01197
- Easily remove both wall and floor grout
- A high-speed cutter with a 1/8 in steel shank
- A high-speed cutter with a 1/8 in steel shank
- 30 deg angle for controlled cutting
- Guides 180 deg apart to keep bit centered
DREMEL 570 Grout Removal Bit, 1/8 in Dia, 1-1/2 in L, 10 mm L Flute, 1/8 in Dia Shank, Steel
D032-01225
- Easily remove both wall and floor grout
- A high-speed cutter with a 1/8 in steel shank
- A high-speed cutter with a 1/8 in steel shank
- 30 deg angle for controlled cutting
- Guides 180 deg apart to keep bit centered
DREMEL 650 Router Bit, 1/8 in Dia Cutter, 3/4 in L Cutting, 2 in OAL, 1/8 in Dia Shank, 2 -Cutter, H
D032-00650
- Ideal for routing, inlaying and mortising in wood and other soft materials
- Use with Dremel model 230 and 330 router attachment
- Use with Dremel model 230 and 330 router attachment
- Also can be used with model 335 plunge router attachment
- Also can be used with model 335 plunge router attachment
DREMEL 662DR Drill Bit, 1/8 in Dia
D032-03010
- Drill holes in both flat and contoured glass
- Diamond-impregnated cutting bit for long life
- Diamond-impregnated cutting bit for long life
- Diamond grit around the circumference of the bit allows it to rasp a larger hole if needed
- Holes on the side of the bit allow the removal of material
DREMEL 664DR Drill Bit, 1/16, 3/32 in Dia, 2 in OAL, Diamond Drill Flipbit, 1/8 in Dia Shank
D032-03958
- New FlipBit design use one bit to make 1/16 in (1.6 mm) and 3/32 in (2.1 mm) holes
- Perform three functions - drill holes, enlarge holes, make small cuts
- Perform three functions - drill holes, enlarge holes, make small cuts
- 5X longer life than existing Dremel solutions
- 5X longer life than existing Dremel solutions
DREMEL 670-01 Saw Attachment
D032-01802
- Attaches to the rotary tool in seconds with Quick Connect System
- Attaches to the rotary tool in seconds with Quick Connect System
DREMEL 709-02 Rotary Tool Accessory Kit
D032-03065
- Comes with reusable storage case and 110 accessories
- Can stand upright or hang on a wall by hook
- Can stand upright or hang on a wall by hook
- Clear lid, eight storage bins and removable trays make accessories easy to locate
- Complete start-up kit for new Dremel rotary tool users
DREMEL 7144 Point Bit, 3/32 in Dia, 1-1/2 in L, 1/8 in Dia Shank, HSS
D032-07144
- Removes material quickly and easily
- Covered with diamond particles
- Covered with diamond particles
- Use higher speeds for hard woods and slower speeds for metals
- Use higher speeds for hard woods and slower speeds for metals
DREMEL 84922 Grinding Stone, 3/16 in Dia, 1/8 in Arbor/Shank, Silicone Carbide Abrasive
D032-03660
- Specially designed for working with conic and flat surfaces
- Great for grinding and etching
- Great for grinding and etching
- For sharpening, deburring and general-purpose grinding on harder materials
