Need More Help? 718-499-1119
Search
Dremel
Dremel branded products
ZipBit, Sabrecut, 1/8 in, Carbide
D032-00609
- High Speed Steel Drywall Zip Rotary Tool
- Spiral Saw Bit for Cutting Drywall
DREMEL 455 Grinding Stone, 7/32 in Dia, 1/8 in Arbor/Shank
D032-00455
- Precision ground abrasive stone for quick, easy sharpening of chain saw blades
- For quick easy sharpening of chain saw blades
- For quick easy sharpening of chain saw blades
DREMEL 503 Flap Wheel, 3/8 in Dia, 1/8 in Arbor, 120 Grit, Fine, Emery Cloth Abrasive
D032-01182
- Flapwheels grind and polish flat or contoured surfaces
- Effective as finishing sander after heavy-surface sanding and material removal is complete
- Effective as finishing sander after heavy-surface sanding and material removal is complete
- 120-grit for fine finish sanding
- For grinding and polishing applications
DREMEL 7134 Diamond Wheel Point, 5/64 in Dia, 1-1/2 in L, 1/8 in Dia Shank, Metal
D032-07134
- Removes material quickly and easily
- Bits are covered with diamond particles
- Bits are covered with diamond particles
- For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down, this provides plenty of shank for the collect or chuck to hold onto the bit.
- Secure objects to a stable surface while working
DREMEL 9924 Engraving Point, Carbide
D032-09924
- Designed for normal engraving applications
- Ideal for dozens of hobbies and crafts
- Ideal for dozens of hobbies and crafts
- Create fine lines to deep grooves
- Carbide point for the Dremel engraver
Grinding Point, 5/8 in, Aluminum Oxide
D032-08193
- Use on metals, castings, rivets, rust
- For sharpening, deburring and general purpose grinding
Abrasive Disc Mandrel, 1/8 in Shank
D032-00402
- A shank with a screw-like head. Used primarily with Dremel polishing bits and accessories
- This provides plenty of shank for the collect or chuck to hold onto
- Simply remove the screw, line up a cut-off wheel or sanding band over the hole in the shank and replace and tighten the screw
DREMEL 426 Cut-Off Wheel, 1-1/4 in Dia, 0.045 in Thick
D032-00426
- May also be used on other materials including thin wood, plastics and ceramics
- Cut bolts or screws or make slots in rusted or stripped bolts and screws
- Cut bolts or screws or make slots in rusted or stripped bolts and screws
- The cut-off wheel cuts only along its edge
- The cut-off wheel cuts only along its edge
ROTOZIP XB-LF1 Laminate Flooring Bit, 5/32 in Dia, 6 in L, 5/32 in Dia Shank
D032-00414
- Allows you to cut through laminate flooring with ease
- Allows you to cut through laminate flooring with ease
DREMEL MM485B Oscillating Blade, 1-1/2 in, Carbide
D032-03744
- Carbide tooth blade material for high-performance hard material cutting applications
- High-performance flush cut blade, provides longest life and fastest cut
- High-performance flush cut blade, provides longest life and fastest cut
- Universal quick fit system for fast accessory changes
- Multi-max accessories are evaluated by an independent, third party laboratory to undergo tests of endurance and speed against the oscillating accessories
DREMEL VersaFlame 2200-01 Torch Kit, Metal
D032-03870
- Integrated ignition button for easy startup, no independent ignition tool required
- Variable temperature and flame control for versatile use in both torch and flame mode
- Variable temperature and flame control for versatile use in both torch and flame mode
- Detachable base for hands-free operation
- Premium-quality for long life and durability
DREMEL 664DR Drill Bit, 1/16, 3/32 in Dia, 2 in OAL, Diamond Drill Flipbit, 1/8 in Dia Shank
D032-03958
- New FlipBit design use one bit to make 1/16 in (1.6 mm) and 3/32 in (2.1 mm) holes
- Perform three functions - drill holes, enlarge holes, make small cuts
- Perform three functions - drill holes, enlarge holes, make small cuts
- 5X longer life than existing Dremel solutions
- 5X longer life than existing Dremel solutions
DREMEL 84922 Grinding Stone, 3/16 in Dia, 1/8 in Arbor/Shank, Silicone Carbide Abrasive
D032-03660
- Specially designed for working with conic and flat surfaces
- Great for grinding and etching
- Great for grinding and etching
- For sharpening, deburring and general-purpose grinding on harder materials
DREMEL 194 Cutter, 1/8 in Dia, 1-1/2 in L, 1/8 in Dia Shank, HSS
D032-03524
- Appropriate for curved surfaces
- A versatile, high-quality cutter made of high-grade steel
- A versatile, high-quality cutter made of high-grade steel
- For curved surface, shaping, hollowing, grooving, slotting, inlaying, making tapered hole
HSS Shank Cutter, 3/8 in
D032-00199
- Used for shaping, hollowing, grooving, slotting, making tapered holes
- Manufactured by a vaporized vacuum process at extreme heat, the gaseous titanium nitride adheres to the cutting surface
DREMEL 124 Cutter, 5/16 in Dia, 1-1/2 in L, 1/8 in Dia Shank, HSS
D032-00124
- A versatile, high-quality cutter made of high-grade steel
- For shaping, hollowing, grooving, making tapered holes
- For shaping, hollowing, grooving, making tapered holes
DREMEL MM492 Cutting Assortment Pack, 1-1/2 in, HCS
D032-03447
- Newly designed universal quick fit interface for compatibility with most oscillating tool brands
- High carbon steel blade material for high-performance wood cutting applications with flush cutting capability
- High carbon steel blade material for high-performance wood cutting applications with flush cutting capability
- Bi-metal blade material for high-performance metal or wood cutting applications with flush cutting capability
- Half-moon blade design ideal for cutting openings in flooring for venting or in walls for electrical boxes, as well as repairing damaged flooring and window restoration
DREMEL MM14 Hook-and-Loop Pad, 3 in L
D032-03298
- Works with triangle shaped sanding pads
- Quick-fit design allows for fast accessory changes
- Quick-fit design allows for fast accessory changes
Payment options
